Bon,bon,bon
J'ai bien prise usb et firewire, mais pas configuré pour faire du reseau
avec.
Je n'ai pas de fichier /var/log/boot.log, mais
Voila lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600
AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:07.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge
(non-transparent mode) (rev 11)
0000:00:0a.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)
0000:00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 61)
0000:00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 61)
0000:00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 62)
0000:00:0b.3 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV20
[GeForce3 Ti 200] (rev a3)
0000:02:0c.0 Multimedia video controller: Conexant Winfast TV2000 XP
(rev 05)
0000:02:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
et voila ifconfig -a:
eth0 Lien encap:UNSPEC HWaddr
00-01-08-00-37-03-0E-A0-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth1 Lien encap:UNSPEC HWaddr
00-30-04-01-00-00-83-69-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth2 Lien encap:Ethernet HWaddr 00:0C:76:B4:3A:9B
inet adr:192.168.123.119 Bcast:192.168.123.255
Masque:255.255.255.0
adr inet6: fe80::20c:76ff:feb4:3a9b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:422 errors:0 dropped:0 overruns:0 frame:0
TX packets:114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:44110 (43.0 KiB) TX bytes:15912 (15.5 KiB)
Interruption:23 Adresse de base:0xcc00
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:310900 errors:0 dropped:0 overruns:0 frame:0
TX packets:310900 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:39399396 (37.5 MiB) TX bytes:39399396 (37.5 MiB)
sit0 Lien encap:IPv6-dans-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
j'ai du configurer avec eth2 pour faire via ssh
georges