Bonjour, en cours d'installation de carte sans fil interstil, je rencontre des problèmes de taux de transmission limités à 14Ko/s. Dans syslog, j'ai ce qui suit.
eth1: Station identity 001f:0003:0000:0008 eth1: Looks like an Intersil firmware version 0.08 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:50:XX:XX:XX:XX eth1: Station name "Prism I" eth1: ready eth1: index 0x01: Vcc 3.3, irq 9, io 0x0100-0x013f eth1: Tx error, status 4 (FID=010F) eth1: Tx error, status 1 (FID=02EB) eth1: Tx error, status 1 (FID=049B) et dans messages: : eth1: Tx error, status 1 (FID=04D3) [807]: dhcpIPaddrLeaseTime=600 in DHCP server response. [807]: dhcpT1value is missing in DHCP server response. Assuming 300 sec [807]: dhcpT2value is missing in DHCP server response. Assuming 525 sec [807]: DHCP_ACK received from (192.168.0.1) : eth1: Tx error, status 1 (FID=00F1) [807]: sending DHCP_REQUEST for 192.168.0.9 to 192.168.0.1 [807]: dhcpIPaddrLeaseTime=600 in DHCP server response. [807]: dhcpT1value is missing in DHCP server response. Assuming 300 sec [807]: dhcpT2value is missing in DHCP server response. Assuming 525 sec [807]: DHCP_ACK received from (192.168.0.1) : eth1: Tx error, status 1 (FID=0351) : eth1: Tx error, status 1 (FID=0574) Je suis sous GNU/Debian en sarge. Quelqu'un a déjà eu le même problème? Cordialement.
pgpiSireymL4R.pgp
Description: PGP signature
