Bonjour.
je n'arrive pas à graver; pourtant un 'lsusb -v' donne:
Bus 001 Device 002: ID 07ab:fc03 Freecom Technologies USB2-IDE IDE
bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07ab Freecom Technologies
idProduct 0xfc03 USB2-IDE IDE bridge
bcdDevice 11.10
iManufacturer 73
iProduct 81
iSerial 93
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
.. etc ...
puis un 'lsmod' :
Module Size Used by
ide_cd 40804 0
sr_mod 15588 0
cdrom 35072 2 ide_cd,sr_mod
sd_mod 13792 0
usb_storage 29787 1
scsi_mod 75596 3 sr_mod,sd_mod,usb_storage
uhci_hcd 30928 0
ohci_hcd 18048 0
ehci_hcd 24004 0
usbcore 108220 6 usb_storage,uhci_hcd,ohci_hcd,ehci_hcd
snd_pcm_oss 53252 0
snd_mixer_oss 19104 1 snd_pcm_oss
parport_pc 24316 1
lp 9696 0
parport 28000 2 parport_pc,lp
snd_intel8x0 31972 0
snd_ac97_codec 54468 1 snd_intel8x0
snd_pcm 98020 2 snd_pcm_oss,snd_intel8x0
snd_timer 24548 1 snd_pcm
snd_page_alloc 11812 2 snd_intel8x0,snd_pcm
snd_mpu401_uart 7328 1 snd_intel8x0
snd_rawmidi 24128 1 snd_mpu401_uart
snd_seq_device 8040 1 snd_rawmidi
snd 50084 9
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_tim
er,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8544 1 snd
rtc 11800 0
8250 20992 0
serial_core 22304 1 8250
r128 94668 0
agpgart 32104 0
eepro100 29932 0
mii 5024 1 eepro100
les bons modules sont chargés.
Et si je fais un 'cdrecord -scanbus -dev=ATAPI':
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'MATSHITA' 'DVD-ROM SR-8175 ' 'GF22' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
c'est le dvd-rom de mon portable et non le graveur.
Voilà. J'ai essayé de monté /dev/sda mais ca ne fonctionne pas. Là je
bloque, pourriez-vous m'aider, svp?
merci
