Salut,
Depuis peu, cdrecord permet d'utiliser les graveurs ATAPI sans passer
par la case « émulation SCSI ». Histoire d'essayer la chose, je suis allé
emprunter un graveur à la boutique du coin. Dans la foulée, j'ai
rétroporté vers Woody (1) le paquet cdrecord de Sid, qui donc
inclus le support direct de l'interface ATA. C'est paartiii...
On regarde d'abord si le graveur est reconnu :
cdrecord -scanbus -dev=ATAPI
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'HL-DT-ST' 'CD-RW GCE-8480B ' '1.03' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
Si oui, on peut essayer de lancer la gravure (j'ai tout de même fait un
test préalable avec l'option -dummy) :
cdrecord -dev=ATAPI:0,0,0 [OPTIONS]
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8480B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 699 MB
Total size: 803 MB (79:33.97) = 358048 sectors
Lout start: 803 MB (79:35/73) = 358048 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 359849 (79:59/74)
Disk type: unknown dye (old id code)
Manuf. index: 81
Manufacturer: ILLEGAL OLD CODE: Old Ritek Co.???
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 1801
Starting to write CD/DVD at speed 32 in real SAO mode for single session.
[...]
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
[...]
Track 01: Total bytes read/written: 733282304/733282304 (358048 sectors).
Writing time: 310.592s
Average write speed 15.6x.
Min drive buffer fill was 22%
Fixating...
Fixating time: 13.809s
cdrecord: fifo had 11550 puts and 11550 gets.
cdrecord: fifo was 32 times empty and 6149 times full, min fill was 0%.
Comme on peut le voir, ça a marché, et du premier coup !
En somme, rien de compliqué. Néanmoins, soyez PRUDENTS si vous
tentez l'expérience, le support pour l'interface ATA est encore
considéré comme alpha, c'est à dire pas forcément très stable...
A++
Nicolas
(1) : Dispo. ici : http://dpt.tuxfamily.org/paquets-woody.html
