Bonjour je viens d'installer une carte tuner Miro PCTV sur une sid. Quand je lance v4l-conf, il me dit qu'il n'y a pas de /dev/video0 j'essaye alors avec l'option -c pour specifier le device /dev/video. Cela ne change rien. Je suis un peu perdu Pourtant le noyau detecte bien la carte, pour preuve un morceau de mon /var/log/messages :
Jul 18 00:28:58 zion kernel: bttv0: Bt878 (rev 17) at 00:09.0, irq: 0, latency: 32, memory: 0xed000000 Jul 18 00:28:58 zion kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is bd11:1200 Jul 18 00:28:58 zion kernel: bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] Jul 18 00:29:42 zion kernel: i2c-core.o: driver i2c TV tuner driver registered. zion:/dev# tail -f /var/log/messages Jul 18 00:28:58 zion kernel: bttv: using 2 buffers with 2080k (4160k total) for capture Jul 18 00:28:58 zion kernel: bttv: Host bridge is PCI device 10b9:1647 (Acer Laboratories Inc. [ALi]) Jul 18 00:28:58 zion kernel: bttv: Bt8xx card found (0). J'aurais besoin d'un peu d'aide pour configurer celle-ci . merci d'avance. Jean-Charles Preaux http://analogx.dyndns.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]