Bonsoir, Selon le résultat "SMART overall-health self-assessment test result: PASSED" l'auto-evaluation de la santé du disque n'a pas donné de mauvais résultats. Tu peux utiliser l'utilitaire Disks pour une évaluation en mode graphique
Le mar. 28 août 2018 21:11, bidons59 <bidon...@gmail.com> a écrit : > > > Le 28/08/2018 à 18:46, nicolas.patr...@gmail.com a écrit : > > Le 28/08/2018 17:02:39, Fabrice Delvallée a écrit : > > > >> Je viens de trouver de deux répertoires aux noms étranges à la racine > >> de ma Debian stretch : > > > > […] > > > >> Bien sur j'ai aucune idée de ce que je faisait le 15 août vers > >> 11h18... > > > >> Est-ce grave docteur ? > > > > Vérifie ton disque avec gsmartcontrol. > > > > nicolas patrois : pts noir asocial > > > J'avoue ne pas être un spécialiste de smart. J'ai effectué un test > 'Short offline' puis un 'Extended Slef-test' > > Je pollue la liste avec la sortie: > > smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.17.0-0.bpo.1-amd64] (local > build) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, > www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: Samsung based SSDs > Device Model: Samsung SSD 840 PRO Series > Serial Number: S1ANNEAD626089P > LU WWN Device Id: 5 002538 5503a72e3 > Firmware Version: DXM05B0Q > User Capacity: 128,035,676,160 bytes [128 GB] > Sector Size: 512 bytes logical/physical > Rotation Rate: Solid State Device > Device is: In smartctl database [for details use: -P show] > ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c > SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) > Local Time is: Tue Aug 28 21:07:56 2018 CEST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: ( 0) seconds. > Offline data collection > capabilities: (0x53) SMART execute Offline immediate. > Auto Offline data collection > on/off support. > Suspend Offline collection upon new > command. > No Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 15) minutes. > SCT capabilities: (0x003d) SCT Status supported. > SCT Error Recovery Control > supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 1 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail > Always - 0 > 9 Power_On_Hours 0x0032 097 097 000 Old_age > Always - 12772 > 12 Power_Cycle_Count 0x0032 098 098 000 Old_age > Always - 1810 > 177 Wear_Leveling_Count 0x0013 097 097 000 Pre-fail Always > - 78 > 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always > - 0 > 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always > - 0 > 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always > - 0 > 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always > - 0 > 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always > - 0 > 190 Airflow_Temperature_Cel 0x0032 061 055 000 Old_age Always > - 39 > 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always > - 0 > 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always > - 0 > 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always > - 88 > 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always > - 5865312734 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining > LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed without error 00% 12772 > - > # 2 Short offline Completed without error 00% 12772 > - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > 255 0 65535 Read_scanning was never started > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > >
