Le 04/19/11 07:34, jm130794 a écrit :
Bonjour,
Désolé pour le délai de réponse...
J'ai pu retravailler sur le problème. J'installe sans problème une
CentOS, SystemRescueCD ! Le réseau fonctionne avec ces distributions.
Seule la Squeeze ne fonctionne pas. Etrange, peut-être un problème de
pilote de carte réseau.
Jean-Michel
Bonjour
Si ca peut vous aider, cela fonctiontionne pour moi en
paravirtualisation avec un noyau:
linux-image-2.6.32-5-amd64 2.6.32-31
Lors du boot mon dmesg:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] #1 [00032ac000 - 00032c9000] XEN PAGETABLES ==>
[00032ac000 - 00032c9000]
[ 0.000000] #5 [0002ea9000 - 00032ac000] XEN START INFO ==>
[0002ea9000 - 00032ac000]
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD)
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.012997] installing Xen timer for CPU 1
[ 0.020949] xen_balloon: Initialising balloon driver.
[ 0.114173] XENBUS: Device with no driver: device/vbd/51712
[ 0.114184] XENBUS: Device with no driver: device/vif/0
[ 0.114194] XENBUS: Device with no driver: device/console/0
[ 0.196259] Initialising Xen virtual ethernet driver.
root@ouranos:~# dmesg |more
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31)
(b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar
7 21:35:22 UTC 2011
[ 0.000000] Command line: root=LABEL=root ro clocksource=jiffies
ipv6.disable=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000
[ 0.000000] 0000000000 - 0080000000 page 4k
[ 0.000000] kernel direct mapping tables up to 80000000 @ 100000-503000
[ 0.000000] RAMDISK: 016ab000 - 02ea9000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000080000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 000000000001ffff] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0080000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [00032ac000 - 00032c9000] XEN PAGETABLES ==>
[00032ac000 - 00032c9000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 000168a454] TEXT DATA BSS ==>
[0001000000 - 000168a454]
[ 0.000000] #4 [00016ab000 - 0002ea9000] RAMDISK ==>
[00016ab000 - 0002ea9000]
[ 0.000000] #5 [0002ea9000 - 00032ac000] XEN START INFO ==>
[0002ea9000 - 00032ac000]
[ 0.000000] #6 [0000100000 - 00004e3000] PGTABLE ==>
[0000100000 - 00004e3000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] On node 0 totalpages: 524192
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 998 pages reserved
[ 0.000000] DMA zone: 2946 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7112 pages used for memmap
[ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:80000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff8800032ff000 s90328
r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] trying to map vcpu_info 0 at ffff88000330a020, mfn
21bbb8, offset 32
[ 0.000000] cpu 0 using vcpu_info at ffff88000330a020
[ 0.000000] trying to map vcpu_info 1 at ffff880003328020, mfn
21bb9a, offset 32
[ 0.000000] cpu 1 using vcpu_info at ffff880003328020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 516026
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=LABEL=root ro
clocksource=jiffies ipv6.disable=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2028000k/2097152k available (3080k kernel code,
384k absent, 68768k reserved, 1891k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:288
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 1795.235 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3590.47 BogoMIPS (lpj=7180940)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004090] Initializing cgroup subsys ns
[ 0.004105] Initializing cgroup subsys cpuacct
[ 0.004120] Initializing cgroup subsys devices
[ 0.004132] Initializing cgroup subsys freezer
[ 0.004143] Initializing cgroup subsys net_cls
[ 0.004209] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004223] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004348] CPU 0/0x0 -> Node 0
[ 0.004360] tseg: 0000000000
[ 0.004370] CPU: Physical Processor ID: 1
[ 0.004380] CPU: Processor Core ID: 1
[ 0.004391] Performance Events: AMD PMU driver.
[ 0.004408] ... version: 0
[ 0.004418] ... bit width: 48
[ 0.004427] ... generic registers: 4
[ 0.004437] ... value mask: 0000ffffffffffff
[ 0.004447] ... max period: 00007fffffffffff
[ 0.004458] ... fixed-purpose events: 0
[ 0.004467] ... event mask: 000000000000000f
[ 0.004501] SMP alternatives: switching to UP code
[ 0.012997] installing Xen timer for CPU 1
[ 0.013067] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.016454] Brought up 2 CPUs
[ 0.016554] CPU0 attaching sched-domain:
[ 0.016561] domain 0: span 0-1 level CPU
[ 0.016568] groups: 0 1
[ 0.016581] CPU1 attaching sched-domain:
[ 0.016586] domain 0: span 0-1 level CPU
[ 0.016592] groups: 1 0
[ 0.016743] devtmpfs: initialized
[ 0.020949] Grant table initialized
[ 0.020949] regulator: core version 0.5
[ 0.020949] NET: Registered protocol family 16
[ 0.020949] PCI: Fatal: No config space access function found
[ 0.020949] bio: create slab <bio-0> at 0
[ 0.020949] ACPI: Interpreter disabled.
[ 0.020949] xen_balloon: Initialising balloon driver.
[ 0.024105] vgaarb: loaded
[ 0.024274] PCI: System does not support PCI
[ 0.024286] PCI: System does not support PCI
[ 0.026938] pnp: PnP ACPI: disabled
[ 0.027405] NET: Registered protocol family 2
[ 0.028130] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.030513] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.033508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.034201] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.034220] TCP reno registered
[ 0.034400] NET: Registered protocol family 1
[ 0.034502] Unpacking initramfs...
[ 0.081002] Freeing initrd memory: 24568k freed
[ 0.099837] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.100293] audit: initializing netlink socket (disabled)
[ 0.100323] type=2000 audit(1303133581.348:1): initialized
[ 0.104641] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.106362] VFS: Disk quotas dquot_6.5.2
[ 0.106362] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.106362] msgmni has been set to 4008
[ 0.106362] alg: No test for stdrng (krng)
[ 0.108078] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.108103] io scheduler noop registered
[ 0.108113] io scheduler anticipatory registered
[ 0.108124] io scheduler deadline registered
[ 0.108191] io scheduler cfq registered (default)
[ 0.110194] Linux agpgart interface v0.103
[ 0.110194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.112325] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.112422] PNP: No PS/2 controller found. Probing ports directly.
[ 0.113261] i8042.c: No controller found.
[ 0.113372] mice: PS/2 mouse device common for all mice
[ 0.113459] rtc_cmos: probe of rtc_cmos failed with error -16
[ 0.113507] cpuidle: using governor ladder
[ 0.113517] cpuidle: using governor menu
[ 0.113531] No iBFT detected.
[ 0.113949] TCP cubic registered
[ 0.113960] IPv6: Loaded, but administratively disabled, reboot
required to enable
[ 0.113974] Mobile IPv6
[ 0.113983] mip6_init: can't add xfrm type(destopt)
[ 0.113994] NET: Registered protocol family 17
[ 0.114126] PM: Resume from disk failed.
[ 0.114144] registered taskstats version 1
[ 0.114173] XENBUS: Device with no driver: device/vbd/51712
[ 0.114184] XENBUS: Device with no driver: device/vif/0
[ 0.114194] XENBUS: Device with no driver: device/console/0
[ 0.114222]
/build/buildd-linux-2.6_2.6.32-31-amd64-vrfdM4/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/rtc/hctosys.c:
unab
le to open rtc device (rtc0)
[ 0.114262] Initalizing network drop monitor service
[ 0.114376] Freeing unused kernel memory: 592k freed
[ 0.114799] Write protecting the kernel read-only data: 4236k
[ 0.148353] udev[54]: starting version 164
[ 0.196259] Initialising Xen virtual ethernet driver.
[ 0.211633] blkfront: xvda: barriers enabled
[ 0.212098] xvda: xvda1 xvda2 < xvda5 xvda6 xvda7 xvda8 >
[ 0.672714] kjournald starting. Commit interval 5 seconds
[ 0.672714] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.704475] udev[153]: starting version 164
[ 2.085373] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 2.085539] PCSP: Timer resolution is not sufficient (4000250nS)
[ 2.085555] PCSP: Make sure you have HPET and ACPI enabled.
[ 2.085571] PC-Speaker initialization failed.
[ 2.112170] pcspkr: probe of pcspkr failed with error -5
[ 5.600500] Adding 1044184k swap on /dev/xvda5. Priority:-1
extents:1 across:1044184k SS
[ 5.696995] EXT3 FS on xvda1, internal journal
[ 5.857003] usbcore: registered new interface driver usbfs
[ 5.857248] usbcore: registered new interface driver hub
[ 5.857464] usbcore: registered new device driver usb
[ 5.860884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.881109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.889827] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.923131] usbcore: registered new interface driver hiddev
[ 5.923187] usbcore: registered new interface driver usbhid
[ 5.923202] usbhid: v2.6:USB HID core driver
[ 6.300210] kjournald starting. Commit interval 5 seconds
[ 6.300210] EXT3 FS on xvda8, internal journal
[ 6.300210] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.308066] kjournald starting. Commit interval 5 seconds
[ 6.308066] EXT3 FS on xvda7, internal journal
[ 6.308066] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.312196] kjournald starting. Commit interval 5 seconds
[ 6.312196] EXT3 FS on xvda6, internal journal
[ 6.312196] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.444393] RPC: Registered udp transport module.
[ 15.444414] RPC: Registered tcp transport module.
[ 15.444425] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.484556] Slow work thread pool: Starting up
[ 15.484693] Slow work thread pool: Ready
[ 15.484693] FS-Cache: Loaded
[ 15.519751] FS-Cache: Netfs 'nfs' registered for caching
[ 15.549675] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 16.293220] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 16.321633] NFSD: starting 90-second grace period
[ 26.430605] SCSI subsystem initialized
cdlt
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/4dad295c.6000...@shom.fr
