bonjour,
je possède un vieux (4ans) [HL-DT-ST][DVDRAM GSA-4120B][A101], c'est un graveur dvd double couche et j'avous n'avoir jamais essayé jusqu'a ce jour de dvd+-r(w) , ayant quelques film familiaux pour lesquels je souhaite garder les *.dv, je préfère les mettre sur ce type de format Via k3b, la gravure de cd/dvd simple couche ne pose pas de problème (en mode svcd et cd/dvd de données) j'ai voulu tenté donc une gravure via k3b, mais j'ai eu un plantage 'graveur' avec wodim : le seul moyen d'avoir le lecteur à nouveau fonctionnel(1) était de debrancher l'alim du lecteur, puis remise sous tension. | avant gravure de ce dvd sous k3b : dvd+rw-mediainfo /dev/hdc INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101] GET [CURRENT] CONFIGURATION: Mounted Media: 2Bh, DVD+R Double Layer Current Write Speed: 4.0x1385=5540KB/s Write Speed #0: 4.0x1385=5540KB/s GET [CURRENT] PERFORMANCE: Write Performance: 4.0x1385=5540KB/[EMAIL PROTECTED] -> 4173823] Speed Descriptor#0: 02/4173823 [EMAIL PROTECTED]/s [EMAIL PROTECTED]/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: MKM/003 Legacy lead-out at: 2086912*2KB=4273995776 DVD+R DOUBLE LAYER BOUNDARY INFORMATION: L0 Data Zone Capacity: 2086912*2KB, can still be set READ DISC INFORMATION: Disc status: blank Number of Sessions: 1 State of Last Session: empty "Next" Track: 1 Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: blank Track Start Address: 0*2KB Next Writable Address: 0*2KB Free Blocks: 4173824*2KB Track Size: 4173824*2KB ROM Compatibility LBA: 262144 READ CAPACITY: 0*2048=0 [EMAIL PROTECTED]:~$ dvd+rw-mediainfo /dev/hdc INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101] GET [CURRENT] CONFIGURATION: Mounted Media: 2Bh, DVD+R Double Layer Current Write Speed: 4.0x1385=5540KB/s Write Speed #0: 4.0x1385=5540KB/s GET [CURRENT] PERFORMANCE: Write Performance: 4.0x1385=5540KB/[EMAIL PROTECTED] -> 4173823] Speed Descriptor#0: 02/4173823 [EMAIL PROTECTED]/s [EMAIL PROTECTED]/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: MKM/003 Legacy lead-out at: 2086912*2KB=4273995776 DVD+R DOUBLE LAYER BOUNDARY INFORMATION: L0 Data Zone Capacity: 2086912*2KB, can still be set READ DISC INFORMATION: Disc status: blank Number of Sessions: 1 State of Last Session: empty "Next" Track: 1 Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: blank Track Start Address: 0*2KB Next Writable Address: 0*2KB Free Blocks: 4173824*2KB Track Size: 4173824*2KB ROM Compatibility LBA: 262144 READ CAPACITY: 0*2048=0 | après gravure k3b : cf pièces jointes : k3b_pbgravure_doublecouche.txt | 2iem essais k3b : cf pièces jointes : ErreurK3b_doubleCouche.txt dans les 2 cas ci-dessus, un dvd+rw-mediainfo /dev/hdc me renvois ceci : [rien pendant un loooooon moment (~2minutes), puis ....] INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101] GET [CURRENT] CONFIGURATION: :-( no media mounted, exiting... ---> a partir de là mon graveur ne notifie plus au système l'insertion d'un média : reset courant nécessaire pour retour à la normale | xcdroast (en mode simulation) Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "OLDATAPI:0,1,0" gracetime=10 fs=4096k -v driveropts=burnfree speed=4 -dao -dummy -eject -pad -waiti tsize=4970428s - TOC Type: 1 = CD-ROM scsidev: 'ATAPI:0,1,0' Waiting for data on stdin... devname: 'ATAPI' Driveropts: 'burnfree' scsibus: 0 target: 1 lun: 0 atapi: 1 Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Wodim version: 1.1.2 SCSI buffer size: 64512 wodim: Cannot do inquiry for CD/DVD-Recorder. Errno: 5 (Input/output error), test unit ready scsi sendcmd: fatal error CDB: 00 00 00 00 00 00 cmd finished after 0.000s timeout 200s Je pense que le problème viens de wodim-xcdroast, comment réussir cette gravure ? merci (1) lorsque j'ai inséré d'autres cd : aucun n'était reconnu via syslog, la commande de montage n'a donc aucun effet puisque le message système disait qu'il n'y avait aucun medium dans le lecteur ....)
System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.5 QT Version: 3.3.7 Kernel: 2.6.18-6-k7 Devices ----------------------- HL-DT-ST DVDRAM GSA-4120B A101 (/dev/hdc, ) at /media/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] K3b ----------------------- Size of filesystem calculated: 4020479 Used versions ----------------------- growisofs: 7.0.1 growisofs ----------------------- Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0' /dev/hdc: splitting layers at 2010240 blocks :-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output error growisofs command: ----------------------- /usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:4020479 -dvd-compat -speed=4 -overburn -use-the-force-luke=bufsize:32m mkisofs ----------------------- 4020479 I: -input-charset not specified, using iso-8859-15 (detected in locale settings) 0.01% done, estimate finish Mon Jul 21 18:40:37 2008 0.03% done, estimate finish Mon Jul 21 18:40:37 2008 0.04% done, estimate finish Mon Jul 21 18:40:37 2008 0.05% done, estimate finish Mon Jul 21 18:40:37 2008 0.06% done, estimate finish Mon Jul 21 18:40:37 2008 0.07% done, estimate finish Mon Jul 21 18:40:37 2008 0.09% done, estimate finish Mon Jul 21 18:40:37 2008 0.10% done, estimate finish Mon Jul 21 18:40:37 2008 mkisofs command: ----------------------- /usr/bin/X11/genisoimage -gui -graft-points -volid 20080714GgeModerne -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gbulot/k3bxWwJic.tmp -rational-rock -hide-list /tmp/kde-gbulot/k3bZYUG7a.tmp -joliet -hide-joliet-list /tmp/kde-gbulot/k3b5w4Nja.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-gbulot/k3bw2TTzb.tmp
System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.5 QT Version: 3.3.7 Kernel: 2.6.18-6-k7 Devices ----------------------- HL-DT-ST DVDRAM GSA-4120B A101 (/dev/hdc, ) at /media/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] K3b ----------------------- Size of filesystem calculated: 4020480 Used versions ----------------------- growisofs: 7.0.1 growisofs ----------------------- Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0' /dev/hdc: splitting layers at 2010240 blocks :-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output error growisofs command: ----------------------- /usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:4020480 -use-the-force-luke=dummy -dvd-compat -speed=4 -overburn -use-the-force-luke=bufsize:32m mkisofs ----------------------- 4020480 I: -input-charset not specified, using iso-8859-15 (detected in locale settings) 0.01% done, estimate finish Tue Jul 22 12:06:46 2008 mkisofs command: ----------------------- /usr/bin/X11/genisoimage -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gbulot/k3bXpxmUa.tmp -rational-rock -hide-list /tmp/kde-gbulot/k3bRowxIa.tmp -joliet -hide-joliet-list /tmp/kde-gbulot/k3b0kTHgb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-gbulot/k3bBk77ya.tmp
