Bonjour,
J'essaie de monter un apn coolpix 2000 mais rien à faire. Il est vu et reconnu :
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b0 ProdID=0301 Rev= 0.10 S: Manufacturer=NIKON S: Product=NIKON DSC E2000 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
Si je fais : tail -f /var/log/syslog ça me dit ça :
Mar 17 16:41:25 localhost kernel: usb 5-1: new full speed USB device using address 5
Mar 17 16:41:25 localhost kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Mar 17 16:41:25 localhost usb.agent[4243]: usb-storage: already loaded
Mar 17 16:41:26 localhost kernel: Vendor: NIKON Model: DSC E2000 Rev: 1.00
Mar 17 16:41:26 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 17 16:41:26 localhost kernel: SCSI device sda: 250369 512-byte hdwr sectors (128 MB)
Mar 17 16:41:26 localhost kernel: sda: assuming Write Enabled
Mar 17 16:41:26 localhost kernel: sda: assuming drive cache: write through
Mar 17 16:41:26 localhost kernel: /dev/scsi/host3/bus0/target0/lun0: p1
Mar 17 16:41:26 localhost kernel: Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
Mar 17 16:41:26 localhost kernel: USB Mass Storage device found at 5
Mar 17 16:41:27 localhost scsi.agent[4277]: disk at /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/host3/3:0:0:0
Dans fstab, j'ai : /dev/sda1 /mnt/photo auto rw,user,auto 0 0
J'ai essayé avec sda1, 2, 3,sdb1,2,3 .sans resultat...
Une idée ?
eric
-- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
