Package: installation-reports INSTALL REPORT
Debian-installer-version: 2003-11-11 <http://people.debian.org/~sjogren/d-i/images/daily/> uname -a: Date: 2003-11-11 11:37 Method: Boot from floppy disk in IDE floppy drive Machine: Compaq iPaq Processor: Intel Pentium III (Coppermine) stepping 01 Memory: 251572k/261120k available Root Device: n/a Root Size/partition table: n/a Output of lspci: 00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller Hub] (rev 03) 00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) 00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) 00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02) 01:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: bootfloppy-image.img boots correctly, but at the "Insert the second floppy or plug in a USB storage device" prompt, pressing Return doesn't cause the second floppy to be found, and just repeats the prompt. Under our existing Linux install, the floppy drive appears as: hdc: LS-120 SLIM4 AD UHD Floppy, ATAPI FLOPPY drive -- Ben Harris, University of Cambridge Computing Service.
