On Sun, Sep 30, 2001 at 12:45:28AM +0200, Oyvind A. Holm wrote:
> On 2001-09-29 20:14 [EMAIL PROTECTED] wrote:
>
> > I was making an iso image from a CD with the following command:
> >
> > dd if=/dev/cdrom of=image.iso
> >
> > when the image.iso where finished (I think it) there were an error that
> > look as :
> >
> > scsi0: ERROR on channel 0, id 0, lun 0, CDB: 0x03 00 00 00 40 00
> > Info fld=0x53f78, Current sd0b:00: sns = f0 3
> > ASC=11 ASCQ= 5
> > Raw sense data:0xf0 0x00 0x03 0x00 0x05 0x3f 0x78 0x0a 0x00 0x00 0x00
> > 0x00 0x11
> > 0x05 0x00 0x00 0x00 0x00
> > I/O error: dev 0b:00, sector 1375712
> > I/O error: dev 0b:00, sector 1375716
> >
> > I don't know where is the problem and I don't find anything over
> > internet.
> >
> > Later, I recorded one CD and when I was verifying if the record is good
> > I get the same error. I verify that with : md5sum /dev/cdrom
>
> Have you tried using head(1) to limit the stream, you might have read
> beyond end of image.
>
> head -c 678039552 /dev/cdrom >image.iso
>
> for NON_US potato.
>
> Regards,
> Øyvind
Ok, but I know that with cat /dev/cdrom > image.iso I can make an iso
image... and I tried that command with a CD not recorded in my Writter
and it works.
I think it could be that I don't do the things well when I record a CD.
I used the following command:
mkisofs -q -r cdvarios | cdrecord dev=0,1,0 speed=16 \
driveropts=burnproof fs=15M -
I have read that I must give tsize option to the cdrecord, could that be
a mistake? must I do that or is not needed?
Now, could you tell me where can I find information about this kind of
problem? I was searching in google and nothing... :(
Thank you.
Sorry for my english.
--
yoros
