Package: src:yade Version: 2026.1.0-3 Severity: serious Tags: ftbfs forky sid
Dear maintainer: During a rebuild of all packages in unstable, this package failed to build. Below you will find the last part of the build log (probably the most relevant part, but not necessarily). If required, the full build log is available here: https://people.debian.org/~sanvila/build-logs/202605/ About the archive rebuild: The build was made on virtual machines from AWS, using sbuild and a reduced chroot with only build-essential packages. If you cannot reproduce the bug please contact me privately, as I am willing to provide ssh access to a virtual machine where the bug is fully reproducible. If this is really a bug in one of the build-depends, please use reassign and add an affects on src:yade, so that this is still visible in the BTS web page for this package. Thanks. -------------------------------------------------------------------------------- [...] debian/rules clean dh clean --builddirectory=/<<PKGBUILDDIR>>/debian/build --with python3 --no-parallel dh_auto_clean -O--builddirectory=/<<PKGBUILDDIR>>/debian/build -O--no-parallel debian/rules execute_after_dh_auto_clean make[1]: Entering directory '/<<PKGBUILDDIR>>' rm -rf /<<PKGBUILDDIR>>/debian/build-double rm -rf /<<PKGBUILDDIR>>/debian/build-longdouble rm -rf /<<PKGBUILDDIR>>/debian/build-float128 rm -rf /<<PKGBUILDDIR>>/debian/build-mpfr150 rm -rf /<<PKGBUILDDIR>>/yade.1 rm -rf /<<PKGBUILDDIR>>/yade-batch.1 rm -rf /<<PKGBUILDDIR>>/debian/matplotlib rm -rf /<<PKGBUILDDIR>>/doc/sphinx/_build rm -rf /<<PKGBUILDDIR>>/doc/sphinx/__pycache__ make[1]: Leaving directory '/<<PKGBUILDDIR>>' [... snipped ...] ################################### running: checkLS_DEM_viscoelastic.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.214369[0m ___________________________________ ################################### running: checkShapeVolume.py [91m checkShapeVolume.py failure, caught exception NameError : name 'np' is not defined [0m ################################### running: checkAvoidSelfInteractionMask.py testing collider.avoidSelfInteractionMask 0 bb br gg gr rr 1 bb br gr 2 br gg gr 3 br gr Status:[92m success[0m, time spent on this check:[92m 0:00:00.002562[0m ___________________________________ ################################### running: checkSaveLoadClumps.py Kinetic energy OK 1.172077E-09 Kinetic energy OK 1.100470E-01 Kinetic energy OK 1.100690E-01 Kinetic energy OK 1.122819E-01 Status:[92m success[0m, time spent on this check:[92m 0:00:04.058582[0m ___________________________________ ################################### running: checkTestDummy.py checkTest mechanism Status:[92m success[0m, time spent on this check:[92m 0:00:00.001360[0m ___________________________________ ################################### running: checkLubrication.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.324455[0m ___________________________________ ################################### Skipping checkJCFpm.py, because it is [44min skipScripts[0m. ################################### Skipping checkCapillaryEngineStandalone.py, because it is [44min skipScripts[0m. ################################### running: checkViscElBC.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.042000[0m ___________________________________ ################################### Skipping checkClumpHopper.py, because it is [44min slowScripts[0m. ################################### running: checkViscElPM2.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.123417[0m ___________________________________ ################################### running: checkGravityRungeKuttaCashKarp54.py checkGravityRungeKuttaCashKarp54.py : yade precision is 15 decimal places. Will use error tolerance of: 1e-12 Note: for high precision calculations use yade.math.toHP1(...) see this: g = yade.math.toHP1('-9.81') ## produces: -9.81 g = -9.81 ## produces: -9.81 See https://yade-dem.org/doc/HighPrecisionReal.html#string-conversions for more info. Status:[92m success[0m, time spent on this check:[92m 0:00:00.082716[0m ___________________________________ ################################### running: checkPeriodicThermalConduction.py This checkThermalEngine.py cannot be executed because ENABLE_THERMAL is disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.002007[0m ___________________________________ ################################### Skipping checkPolyhedraDrum.py, because it is [44min skipScripts[0m. ################################### Skipping DEM-PFV-check.py, because it is [44min skipScripts[0m. ################################### running: checkVTKRecorder.py checkVTKRecorder Check file 10.vtm Check file 10/10_0.vtu Check file 10/10_2.vtp Status:[92m success[0m, time spent on this check:[92m 0:00:00.093222[0m ___________________________________ ################################### running: checkRotAlgorithmNonSpherical.py Status:[92m success[0m, time spent on this check:[92m 0:00:04.570685[0m ___________________________________ ################################### Skipping checkMPI.py, because it is [44min skipScripts[0m. ################################### running: checkWeight.py Precalculated weight 756.093387 Obtained weight 756.093387 Status:[92m success[0m, time spent on this check:[92m 0:00:00.122463[0m ___________________________________ ################################### running: checkPotentialParticles.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.043042[0m ___________________________________ ################################### running: checkViscElEng.py Precalculated en value 0.736356797441 Obtained en value 0.736356797441 Status:[92m success[0m, time spent on this check:[92m 0:00:00.201853[0m ___________________________________ ################################### running: checkSetPerm.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.041878[0m ___________________________________ ################################### running: checkKineticEnergy.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.930447[0m ___________________________________ ################################### running: checkViscElPM.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.042145[0m ___________________________________ ################################### running: checkHertzExtended.py This checkHertzExtended.py cannot be executed because CGAL is disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.001811[0m ___________________________________ ################################### running: checkColliderCorrectness.py checkColliderCorrectness for InsertionSortCollider Status:[92m success[0m, time spent on this check:[92m 0:00:00.252670[0m ___________________________________ ################################### running: checkAlpha.py CGAL not in features, skip Status:[92m success[0m, time spent on this check:[92m 0:00:00.001483[0m ___________________________________ ################################### running: checkbf_unixial_clump.py Status:[92m success[0m, time spent on this check:[92m 0:00:01.886747[0m ___________________________________ ################################### running: checkThermalEngine.py This checkThermalEngine.py cannot be executed because ENABLE_THERMAL is disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.002037[0m ___________________________________ ################################### running: checkCohesiveFrictionalLaw.py Pull contact until it breaks [1.0, 0, 0.0, 0.0, 0.0, 0.0] [1.0, 0, 399.5999999999995, 0.0, 0.0, 0.0] [1.0, 0, 899.0999999999989, 0.0, 0.0, 0.0] [0.0, 0, 0, 0, 0, 0] Inverse velocity to create new non-cohesive contact [0.0, 0, 0, 0, 0, 0] [1.0, 1, 98.89999999999866, 0.0, 0.0, 0.0] Apply pure bending [1.0, 1, 98.89999999999866, 0.0, 10.0, 0.0] [1.0, 1, 98.89999999999866, 0.0, 60.0, 0.0] Un-bend [1.0, 1, 98.89999999999866, 0.0, 0.0, 0.0] Twist [1.0, 1, 98.89999999999866, 0.0, 0.0, 98.89999999999866] Break remote interaction by bending [1.0, 1, 98.89999999999866, 0.0, 50.0, 0.0] [1.0, 1, 98.89999999999866, 0.0, 98.89999999999866, 0.0] Shear compressed contact with residual friction [1.0, 1, 98.89999999999866, 30.0, 0.0, 0.0] [1.0, 1, 98.89999999999866, 54.02931624555014, 0.0, 0.0] CohesiveFrictional model passed with difference = 0.0 Status:[92m success[0m, time spent on this check:[92m 0:00:00.526570[0m ___________________________________ ################################### running: checkLS_DEM_pbc.py Periodic boundary conditions for LS-DEM as correct as expected Status:[92m success[0m, time spent on this check:[92m 0:00:03.333608[0m ___________________________________ ################################### Skipping checkPolyhedraCrush.py, because it is [44min skipScripts[0m. ################################### running: checkPotentialVTKRecorders.py checking file: /tmp/tmp6up6r4qm/potentialVTKRecorders/ppcontactPoint.10.vtu checking file: /tmp/tmp6up6r4qm/potentialVTKRecorders/ppId.10.vtu checking file: /tmp/tmp6up6r4qm/potentialVTKRecorders/pp-pb.10.vtp checking file: /tmp/tmp6up6r4qm/potentialVTKRecorders/ppvel.10.vtu non-matching lines: 0 skip PotentialBlockVTKRecorder check, PotentialBlocks or VTK not available Status:[92m success[0m, time spent on this check:[92m 0:00:00.086660[0m ___________________________________ ################################### running: checkDEM-PFVPressureInjection.py This checkDEM-PFVPressureInjection.py cannot be executed because PFVFLOW is disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.002916[0m ___________________________________ ################################### running: checkBlockGen.py skip BlockGen check, PotentialBlocks not available Status:[92m success[0m, time spent on this check:[92m 0:00:00.001366[0m ___________________________________ ################################### running: checkLS_DEM.py LS-DEM as correct as expected at particle scale LS-DEM ScGeom contact description as correct as expected LS-DEM LSnodeGeom contact description as correct as expected Ig2_Wall_LevelSet_ScGeom as correct as expected Fast Marching Method as correct as expected LStwin of clumps as correct as expected Status:[92m success[0m, time spent on this check:[92m 0:00:01.014768[0m ___________________________________ ################################### running: checkPolyhedra_shearForce.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.001671[0m ___________________________________ ################################### Skipping colliderTorture.py, because it is [44min slowScripts[0m. ################################### running: checkCapillaryModels.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.041734[0m ___________________________________ ################################### running: checkLiquidMigration.py This checkLiquidMigration.py cannot be executed because LIQMIGRATION is disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.001547[0m ___________________________________ ################################### Skipping checkList.py, because it is [44min skipScripts[0m. ################################### running: checkbf_simple.py Status:[92m success[0m, time spent on this check:[92m 0:00:01.364751[0m ___________________________________ ################################### Skipping checkFlipSpheres.py, because it is [44min slowScripts[0m. ################################### running: checkPotentialBlocks.py skip PotentialBlocks check, PotentialBlocks not available Status:[92m success[0m, time spent on this check:[92m 0:00:00.002200[0m ___________________________________ ################################### running: checkFlipCell.py flipCell is working properly (tested on 1000 random flips, 277 of which needed more than one flip for orthogonality) Status:[92m success[0m, time spent on this check:[92m 0:00:00.082989[0m ___________________________________ ################################### running: checkGravity.py checkGravity.py : yade precision is 15 decimal places. Will use error tolerance of: 1e-10 Note: for high precision calculations use yade.math.toHP1(...) see this: g = Real('-9.81') ## produces: -9.81 g = -9.81 ## produces: -9.81 See https://yade-dem.org/doc/HighPrecisionReal.html#string-conversions for more info. Status:[92m success[0m, time spent on this check:[92m 0:00:01.685354[0m ___________________________________ ################################### Skipping checkMPI4PYcomm.py, because it is [44min skipScripts[0m. ################################### Skipping checkMPYcomm.py, because it is [44min skipScripts[0m. ################################### Skipping checkMPISilo.py, because it is [44min slowScripts[0m. ################################### running: checkTestTriax.py File ./checkTest.yade moved into /tmp/tmppnmyuq7z/ directory File ./_Unloaded_380_3.spheres moved into /tmp/tmppnmyuq7z/ directory File ./_Unloaded_380_3.xml moved into /tmp/tmppnmyuq7z/ directory File ./WallStresses moved into /tmp/tmppnmyuq7z/ directory Status:[92m success[0m, time spent on this check:[92m 0:00:00.124542[0m ___________________________________ ################################### running: checkMultiScGeom.py Status:[92m success[0m, time spent on this check:[92m 0:00:01.542531[0m ___________________________________ ################################### running: checkWirePM.py Status:[92m success[0m, time spent on this check:[92m 0:00:01.166992[0m ___________________________________ ################################### running: check_TwoPhaseFlowEngine_PressureInjection.py This check_TwoPhaseFlowEngine_PressureInjection.py cannot be executed because TWOPHASEFLOW or PFVFLOW are disabled Status:[92m success[0m, time spent on this check:[92m 0:00:00.003158[0m ___________________________________ ################################### running: checkLubricationWithRoughness.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.321899[0m ___________________________________ ################################### running: checkCoatingOfSegBodies.py Status:[92m success[0m, time spent on this check:[92m 0:00:00.042079[0m ___________________________________ Most time spend on a single check: 0:00:04.570685 [91m 1 tests are failed[0m checkShapeVolume.py Adding slavesmake[1]: *** [debian/rules:88: override_dh_auto_install] Error 1 make[1]: Leaving directory '/<<PKGBUILDDIR>>' make: *** [debian/rules:24: binary] Error 2 dpkg-buildpackage: error: debian/rules binary subprocess failed with exit status 2 -------------------------------------------------------------------------------- -- debian-science-maintainers mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/debian-science-maintainers
