Я вставляю внешний хард, он подключается как /dev/sdc1. Монтирую. Все. Смотрю, с него фильм, слушаю музыку. Через некоторое время, совершенно произвольно, он теряется, бегут эрроры, мол, девайс вынули. На самом деле никто девайс не трогал. Но /dev/sdc* уже не существует, зато появился /dev/sdd* или там /dev/sdb*. Это все тот же внешний хард.
Что за фигня, и кто виноват, udev или косяки с железом пошли? Раньше ничего такого не было, никаких обновлений софта в последнее время не делал. в логе куча странностей: ----------cut---------------- [ 5250.620584] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 5250.754133] usb 1-3: New USB device found, idVendor=05e3, idProduct=0702 [ 5250.754144] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5250.754151] usb 1-3: Product: USB TO IDE [ 5250.754384] usb 1-3: configuration #1 chosen from 1 choice [ 5250.778775] scsi4 : SCSI emulation for USB Mass Storage devices [ 5250.793487] usb-storage: device found at 4 [ 5250.793496] usb-storage: waiting for device to settle before scanning [ 5255.792339] usb-storage: device scan complete [ 5255.793091] scsi 4:0:0:0: Direct-Access ST66022C F 0811 PQ: 0 ANSI: 0 [ 5255.802304] sd 4:0:0:0: [sdd] 12001248 512-byte hardware sectors: (6.14 GB/5.72 GiB) [ 5255.807438] sd 4:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 5255.811175] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 5255.818053] sd 4:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 5255.822496] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 5255.827229] sdd: sdd1 [ 5255.871142] sd 4:0:0:0: [sdd] Attached SCSI disk [ 5267.777707] usb 1-3: USB disconnect, address 4 [ 5268.055521] usb 1-3: new high speed USB device using ehci_hcd and address 5 [ 5268.124392] hub 1-0:1.0: unable to enumerate USB device on port 3 [ 5268.392061] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 5268.535096] usb 3-1: not running at top speed; connect to a high speed hub [ 5268.553112] usb 3-1: New USB device found, idVendor=05e3, idProduct=0702 [ 5268.558118] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5268.563490] usb 3-1: Product: USB TO IDE [ 5268.569245] usb 3-1: configuration #1 chosen from 1 choice [ 5268.592162] scsi5 : SCSI emulation for USB Mass Storage devices [ 5268.592757] usb-storage: device found at 2 [ 5268.592762] usb-storage: waiting for device to settle before scanning [ 5271.160340] usb 3-1: USB disconnect, address 2 [ 5272.456047] usb 1-3: new high speed USB device using ehci_hcd and address 6 [ 5272.590883] usb 1-3: New USB device found, idVendor=05e3, idProduct=0702 [ 5272.590893] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 -----------------cut----------------- ну, и так постоянно, что может быть тому причиной? -- To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
