В Пнд, 26/01/2009 в 17:34 +0300, Dmitry E. Oboukhov пишет: > MA> И что ж за глюк-то с записью, а? Некошерно как-то образ дебиана под > MA> виндой жечь... > а попробуй писать woodim'ом а не dd
Это была моя _последняя_ )) болванка: $ wodim -dev=/dev/dvd -speed=0 -dao ./debian-testing-i386-DVD-1.iso Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identification : 'DVD_RW ND-3500AG' Revision : '2.16' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Speed set to 8467 KB/s Starting to write CD/DVD at speed 6.0 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Errno: 5 (Input/output error), write_g1 scsi sendcmd: cmd timeout after 0.000 (200) s CDB: 2A 00 00 0A 0F 8B 00 00 1F 00 Sense Bytes: Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.000s timeout 200s write track data: error after 1350326272 bytes wodim: A write error occured. wodim: Please properly read the error message above. Errno: 0 (Success), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) operation 0% done cmd finished after 0.000s timeout 200s Errno: 0 (Success), close track/session scsi sendcmd: no error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) operation 0% done cmd finished after 0.000s timeout 1000s Errno: 0 (Success), flush cache scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) operation 0% done cmd finished after 0.000s timeout 1000s Trouble flushing the cache -- С уважением, Алексей Мишустин -- To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
