В сообщении от Среда 22 Декабрь 2004 11:57 Yuri Kozlov написал(a):
> >прошивках выше
> > 3.6. Что посоветуете ? Перепрошивать ?
>
> Если поможет:
> yuray:/home/yuray# hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=ST380011A, FwRev=3.06, SerialNo=5JVAL2YE
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
>
> * signifies the current active mode
>
> yuray:/home/yuray# hdparm -Tt /dev/hda
>
> /dev/hda:
> Timing cached reads: 3260 MB in 2.00 seconds = 1630.25 MB/sec
> Timing buffered disk reads: 168 MB in 3.03 seconds = 55.42 MB/sec
>
> dmesg |grep UDMA
> hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63,
> UDMA(100)
>
> ~~~~~~~~~~~~ против ваших (33) ?
>
> Regards,
> Yuri Kozlov
аналогично
$ dmesg |grep hda|head -5
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
hda: ST380011A, ATA DISK drive
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
# hdparm -tTi /dev/hda
/dev/hda:
Model=ST380011A, FwRev=3.06, SerialNo=5JV9YN1G
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
* signifies the current active mode
Timing cached reads: 1468 MB in 2.00 seconds = 733.01 MB/sec
Timing buffered disk reads: 150 MB in 3.00 seconds = 49.97 MB/sec
$ uname -a
Linux yurkin 2.6.9 #3 Fri Dec 17 14:13:38 NOVT 2004 i686 GNU/Linux
$ lspci |grep IDE
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
--
С уважением,
Юркин Евгений
Siberia Health Inc
