Что нужно сделать чтобы можно было играть в Tuxracer и др?
Видео встроенное sis630 (ноутбуковская). Поставил sisxdriver -- не помогло.
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "/usr/X11R6/lib/X11/fonts/local"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/afms"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/type1"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
EndSection
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" "winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mouse1"
Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "GLcore"
Load "extmod"
Load "pex5"
Load "record"
Load "xie"
Load "bitmap"
Load "speedo"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# SubSection "extmod"
# #Option "omit xfree86-dga"
#
# EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|SVGA ЧЩУПЛПК ЮБУФПФЩ, 1024x768 РТЙ 70 зГ"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-57.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync
-vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "SiS 630"
VendorName "Unknown"
BoardName "Unknown"
Driver "sis"
# VideoRam 16384
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "EnableSiSCtrl" "true"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "SiS 630"
Monitor "Generic|SVGA ЧЩУПЛПК ЮБУФПФЩ, 1024x768 РТЙ 70 зГ"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
