diff -Nru broadcom-sta-6.30.223.271/debian/changelog broadcom-sta-6.30.223.271/debian/changelog
--- broadcom-sta-6.30.223.271/debian/changelog	2020-09-27 20:26:10.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/changelog	2021-05-04 18:11:49.000000000 +0900
@@ -1,3 +1,25 @@
+broadcom-sta (6.30.223.271-16) unstable; urgency=medium
+
+  * Upload to unstable.
+  * debian/patches:
+    - Fix typo of patch 21.
+    - Previous patch 19 20 fixes old ticket (Closes: #987159).
+  * debian/README.source:
+    - Note some git repo for future reference.
+
+ -- Roger Shimizu <rosh@debian.org>  Tue, 04 May 2021 18:11:49 +0900
+
+broadcom-sta (6.30.223.271-16~exp1) experimental; urgency=medium
+
+  * debian/patches:
+    - Add 5 patches from Diego Escalante Urrelo to improve:
+      + power mgmt setting
+      + tx_power
+      + mac address setting
+      + other minor fixes
+
+ -- Roger Shimizu <rosh@debian.org>  Sat, 03 Oct 2020 02:25:04 +0900
+
 broadcom-sta (6.30.223.271-15) unstable; urgency=medium
 
   * debian/patches:
diff -Nru broadcom-sta-6.30.223.271/debian/patches/18-wl-Make-sure-power_mgmt-settings-are-honored.patch broadcom-sta-6.30.223.271/debian/patches/18-wl-Make-sure-power_mgmt-settings-are-honored.patch
--- broadcom-sta-6.30.223.271/debian/patches/18-wl-Make-sure-power_mgmt-settings-are-honored.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/18-wl-Make-sure-power_mgmt-settings-are-honored.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,30 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Thu, 23 Jul 2020 09:46:52 -0500
+Subject: wl: Make sure power_mgmt settings are honored
+
+The driver does *not* respect calls to set_power_mgmt() to turn power
+saving off, it sets "PM_OFF" when it is asked to turn off PM by
+userspace. However, it seems that unidentified circumstances will turn
+PM to PM_FAST automatically again and again, disregarding user input.
+
+This patch uses PM_FORCE_OFF instead of PM_OFF which seems to reliably
+keep PM off, no matter the circumstances.
+---
+ amd64/src/wl/sys/wl_cfg80211_hybrid.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/amd64/src/wl/sys/wl_cfg80211_hybrid.c b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+index 111ec5a..e81389f 100644
+--- a/amd64/src/wl/sys/wl_cfg80211_hybrid.c
++++ b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+@@ -1479,7 +1479,9 @@ wl_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+ 	s32 pm;
+ 	s32 err = 0;
+ 
+-	pm = enabled ? PM_FAST : PM_OFF;
++	/* NOTICE: Use PM_FORCE_OFF, otherwise powersaving will turn itself
++	 * ON again (PM_FAST) when on battery power. */
++	pm = enabled ? PM_FAST : PM_FORCE_OFF;
+ 	pm = htod32(pm);
+ 	WL_DBG(("power save %s\n", (pm ? "enabled" : "disabled")));
+ 	err = wl_dev_ioctl(dev, WLC_SET_PM, &pm, sizeof(pm));
diff -Nru broadcom-sta-6.30.223.271/debian/patches/19-wl-Fix-get-set-values-for-tx_power.patch broadcom-sta-6.30.223.271/debian/patches/19-wl-Fix-get-set-values-for-tx_power.patch
--- broadcom-sta-6.30.223.271/debian/patches/19-wl-Fix-get-set-values-for-tx_power.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/19-wl-Fix-get-set-values-for-tx_power.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,117 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Thu, 23 Jul 2020 13:11:51 -0500
+Subject: wl: Fix get/set values for tx_power
+
+The wl driver seems to be using an internal "qdbm" unit for the
+"qtxpower" registry, where hardware power is read, and naively using
+that value around the get/set cfg80211 functions.
+
+This 'qdBm' unit is simply (dBm * 4) and defaults to "23 *4" in
+`wl_linux.c`. This equivalency is confirmed in the brcmfmac kernel
+driver, which seems to be a cleaned up version of this one.
+
+This commit fixes getting and setting the txpower using regular
+utilities like `iwconfig` or `iw`.
+---
+ amd64/src/wl/sys/wl_cfg80211_hybrid.c | 26 +++++++++++++-------------
+ amd64/src/wl/sys/wl_linux.c           |  4 ++++
+ 2 files changed, 17 insertions(+), 13 deletions(-)
+
+diff --git a/amd64/src/wl/sys/wl_cfg80211_hybrid.c b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+index e81389f..fd2430e 100644
+--- a/amd64/src/wl/sys/wl_cfg80211_hybrid.c
++++ b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+@@ -89,13 +89,13 @@ static s32 wl_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, u
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
+ static s32
+ wl_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+-                         enum nl80211_tx_power_setting type, s32 dbm);
++                         enum nl80211_tx_power_setting type, s32 mbm);
+ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
+ static s32 wl_cfg80211_set_tx_power(struct wiphy *wiphy,
+-           enum nl80211_tx_power_setting type, s32 dbm);
++           enum nl80211_tx_power_setting type, s32 mbm);
+ #else
+ static s32 wl_cfg80211_set_tx_power(struct wiphy *wiphy,
+-           enum tx_power_setting type, s32 dbm);
++           enum tx_power_setting type, s32 mbm);
+ #endif
+ 
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
+@@ -1080,24 +1080,25 @@ wl_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, u16 reason_c
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 0)
+ static s32
+ wl_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+-                         enum nl80211_tx_power_setting type, s32 dbm)
++                         enum nl80211_tx_power_setting type, s32 mbm)
+ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
+ static s32
+-wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type, s32 dbm)
++wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type, s32 mbm)
+ #else
+ #define NL80211_TX_POWER_AUTOMATIC TX_POWER_AUTOMATIC
+ #define NL80211_TX_POWER_LIMITED TX_POWER_LIMITED
+ #define NL80211_TX_POWER_FIXED TX_POWER_FIXED
+ static s32
+-wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type, s32 dbm)
++wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type, s32 mbm)
+ #endif
+ {
+ 
+ 	struct wl_cfg80211_priv *wl = wiphy_to_wl(wiphy);
+ 	struct net_device *ndev = wl_to_ndev(wl);
+-	u16 txpwrmw;
+ 	s32 err = 0;
+ 	s32 disable = 0;
++	s32 dbm = MBM_TO_DBM(mbm);
++	s32 qdbm = dbm * 4;
+ 
+ 	switch (type) {
+ 	case NL80211_TX_POWER_AUTOMATIC:
+@@ -1116,6 +1117,9 @@ wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type, s32 db
+ 		break;
+ 	}
+ 
++	qdbm = (qdbm > 127) ? 127 : qdbm;
++	qdbm |= WL_TXPWR_OVERRIDE;
++
+ 	disable = WL_RADIO_SW_DISABLE << 16;
+ 	disable = htod32(disable);
+ 	err = wl_dev_ioctl(ndev, WLC_SET_RADIO, &disable, sizeof(disable));
+@@ -1124,11 +1128,7 @@ wl_cfg80211_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type, s32 db
+ 		return err;
+ 	}
+ 
+-	if (dbm > 0xffff)
+-		txpwrmw = 0xffff;
+-	else
+-		txpwrmw = (u16) dbm;
+-	err = wl_dev_intvar_set(ndev, "qtxpower", (s32) (bcm_mw_to_qdbm(txpwrmw)));
++	err = wl_dev_intvar_set(ndev, "qtxpower", qdbm);
+ 	if (err) {
+ 		WL_ERR(("qtxpower error (%d)\n", err));
+ 		return err;
+@@ -1156,7 +1156,7 @@ static s32 wl_cfg80211_get_tx_power(struct wiphy *wiphy, s32 *dbm)
+ 		return err;
+ 	}
+ 	result = (u8) (txpwrdbm & ~WL_TXPWR_OVERRIDE);
+-	*dbm = (s32) bcm_qdbm_to_mw(result);
++	*dbm = (s32) result / 4;
+ 
+ 	return err;
+ }
+diff --git a/amd64/src/wl/sys/wl_linux.c b/amd64/src/wl/sys/wl_linux.c
+index cc01d2b..4f5e43a 100644
+--- a/amd64/src/wl/sys/wl_linux.c
++++ b/amd64/src/wl/sys/wl_linux.c
+@@ -628,6 +628,10 @@ wl_attach(uint16 vendor, uint16 device, ulong regs,
+ 
+ 	wlc_iovar_setint(wl->wlc, "scan_passive_time", 170);
+ 
++	/* NOTICE: The driver's `qtxpower` option takes values from 0 to
++	 * 127, which correspond to (dBm * 4). This seems to be a half-done
++	 * implementation of their own API. The brcmfmac kernel driver
++	 * confirms this. */
+ 	wlc_iovar_setint(wl->wlc, "qtxpower", 23 * 4);
+ 
+ #ifdef BCMDBG
diff -Nru broadcom-sta-6.30.223.271/debian/patches/20-wl-Fix-mac-address-setting.patch broadcom-sta-6.30.223.271/debian/patches/20-wl-Fix-mac-address-setting.patch
--- broadcom-sta-6.30.223.271/debian/patches/20-wl-Fix-mac-address-setting.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/20-wl-Fix-mac-address-setting.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,51 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Tue, 28 Jul 2020 11:19:37 -0500
+Subject: wl: Fix mac address setting
+
+The function was returning BCM_UNSUPPORTED (-23) when the device did not
+allow for mac address changes. This however corresponds to "too many
+files open" so userspace was getting conflicting info on what was
+happening. Example:
+
+  $ ip link set wlp3s0 address  3c:15:c2:cf:29:dd
+  RTNETLINK answers: Too many open files in system
+
+Now the function properly returns -EADDRNOTAVAIL instead.
+
+This fixes the popular error where NetworkManager is unable to connect
+to wifi networks when wifi.scan-rand-mac-addr=yes (the default) or other
+mac-addr options are in use (see the work around supplied by
+wpasupplicant in /usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf)
+
+Also, the function was incorrectly changing the `net_device->dev_addr`
+even when the hardware had not been able to change it.
+---
+ amd64/src/wl/sys/wl_linux.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/amd64/src/wl/sys/wl_linux.c b/amd64/src/wl/sys/wl_linux.c
+index 4f5e43a..acdac06 100644
+--- a/amd64/src/wl/sys/wl_linux.c
++++ b/amd64/src/wl/sys/wl_linux.c
+@@ -1848,15 +1848,17 @@ wl_set_mac_address(struct net_device *dev, void *addr)
+ 	WL_TRACE(("wl%d: wl_set_mac_address\n", wl->pub->unit));
+ 
+ 	WL_LOCK(wl);
+-
+-	bcopy(sa->sa_data, dev->dev_addr, ETHER_ADDR_LEN);
+ 	err = wlc_iovar_op(wl->wlc, "cur_etheraddr", NULL, 0, sa->sa_data, ETHER_ADDR_LEN,
+ 		IOV_SET, (WL_DEV_IF(dev))->wlcif);
+ 	WL_UNLOCK(wl);
+-	if (err)
++	if (err) {
+ 		WL_ERROR(("wl%d: wl_set_mac_address: error setting MAC addr override\n",
+ 			wl->pub->unit));
+-	return err;
++		return OSL_ERROR(err);
++	} else {
++		bcopy(sa->sa_data, dev->dev_addr, ETHER_ADDR_LEN);
++		return 0;
++	}
+ }
+ 
+ static void
diff -Nru broadcom-sta-6.30.223.271/debian/patches/21-wl-Fix-misleading-indentation.patch broadcom-sta-6.30.223.271/debian/patches/21-wl-Fix-misleading-indentation.patch
--- broadcom-sta-6.30.223.271/debian/patches/21-wl-Fix-misleading-indentation.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/21-wl-Fix-misleading-indentation.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,52 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Thu, 23 Jul 2020 10:30:32 -0500
+Subject: wl: Fix misleading indentation
+MIME-Version: 1.0
+Content-Type: text/plain; charset="utf-8"
+Content-Transfer-Encoding: 8bit
+
+Mixed spaces and tabs caused a misleading indentation warning.
+Tidy up to suppress the warning:
+
+src/wl/sys/wl_linux.c:788:2: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
+  788 |  if ((val & 0x0000ff00) != 0)
+      |  ^~
+src/wl/sys/wl_linux.c:790:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
+  790 |   bar1_size = pci_resource_len(pdev, 2);
+      |   ^~~~~~~~~
+---
+ amd64/src/wl/sys/wl_linux.c | 20 +++++++++++---------
+ 1 file changed, 11 insertions(+), 9 deletions(-)
+
+diff --git a/amd64/src/wl/sys/wl_linux.c b/amd64/src/wl/sys/wl_linux.c
+index acdac06..a63cc4d 100644
+--- a/amd64/src/wl/sys/wl_linux.c
++++ b/amd64/src/wl/sys/wl_linux.c
+@@ -788,16 +788,18 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+ 	pci_read_config_dword(pdev, 0x40, &val);
+ 	if ((val & 0x0000ff00) != 0)
+ 		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+-		bar1_size = pci_resource_len(pdev, 2);
+-		#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 6, 0)
+-		bar1_addr = (uchar *)ioremap(pci_resource_start(pdev, 2),
+-			bar1_size);
+-		#else
+-		bar1_addr = (uchar *)ioremap_nocache(pci_resource_start(pdev, 2),
+-			bar1_size);
+-		#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(5, 6, 0) */
++
++	bar1_size = pci_resource_len(pdev, 2);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 6, 0)
++	bar1_addr = (uchar *)ioremap(pci_resource_start(pdev, 2),
++				     bar1_size);
++#else
++	bar1_addr = (uchar *)ioremap_nocache(pci_resource_start(pdev, 2),
++					     bar1_size);
++#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(5, 6, 0) */
++
+ 	wl = wl_attach(pdev->vendor, pdev->device, pci_resource_start(pdev, 0), PCI_BUS, pdev,
+-		pdev->irq, bar1_addr, bar1_size);
++		       pdev->irq, bar1_addr, bar1_size);
+ 
+ 	if (!wl)
+ 		return -ENODEV;
diff -Nru broadcom-sta-6.30.223.271/debian/patches/22-wl-Fix-fall-through-warnings.patch broadcom-sta-6.30.223.271/debian/patches/22-wl-Fix-fall-through-warnings.patch
--- broadcom-sta-6.30.223.271/debian/patches/22-wl-Fix-fall-through-warnings.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/22-wl-Fix-fall-through-warnings.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,34 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Thu, 23 Jul 2020 15:51:06 -0500
+Subject: wl: Fix fall through warnings
+MIME-Version: 1.0
+Content-Type: text/plain; charset="utf-8"
+Content-Transfer-Encoding: 8bit
+
+Add a gcc special comment to solve a -Wimplicit-fallthrough warning:
+
+src/wl/sys/wl_cfg80211_hybrid.h:52:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
+   52 |  if (wl_dbg_level & WL_DBG_DBG) {   \
+      |     ^
+src/wl/sys/wl_cfg80211_hybrid.c:817:3: note: in expansion of macro ‘WL_DBG’
+  817 |   WL_DBG(("network eap\n"));
+      |   ^~~~~~
+src/wl/sys/wl_cfg80211_hybrid.c:820:2: note: here
+  820 |  default:
+      |  ^~~~~~~
+---
+ amd64/src/wl/sys/wl_cfg80211_hybrid.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/amd64/src/wl/sys/wl_cfg80211_hybrid.c b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+index fd2430e..195c0e4 100644
+--- a/amd64/src/wl/sys/wl_cfg80211_hybrid.c
++++ b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+@@ -790,6 +790,7 @@ wl_set_auth_type(struct net_device *dev, struct cfg80211_connect_params *sme)
+ 		break;
+ 	case NL80211_AUTHTYPE_NETWORK_EAP:
+ 		WL_DBG(("network eap\n"));
++        /* falls through */
+ 	default:
+ 		val = 2;
+ 		WL_ERR(("invalid auth type (%d)\n", sme->auth_type));
diff -Nru broadcom-sta-6.30.223.271/debian/patches/23-wl-Avoid-disconnecting-invalid-interface.patch broadcom-sta-6.30.223.271/debian/patches/23-wl-Avoid-disconnecting-invalid-interface.patch
--- broadcom-sta-6.30.223.271/debian/patches/23-wl-Avoid-disconnecting-invalid-interface.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/23-wl-Avoid-disconnecting-invalid-interface.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,33 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Tue, 28 Jul 2020 13:59:56 -0500
+Subject: wl: Avoid disconnecting invalid interface
+
+Mimic brcmfmac driver and don't try to call WLC_DISASSOC on an invalid
+interface.
+---
+ amd64/src/wl/sys/wl_cfg80211_hybrid.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/amd64/src/wl/sys/wl_cfg80211_hybrid.c b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+index 195c0e4..1801f70 100644
+--- a/amd64/src/wl/sys/wl_cfg80211_hybrid.c
++++ b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+@@ -1065,14 +1065,15 @@ wl_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, u16 reason_c
+ 	WL_DBG(("Reason %d\n", reason_code));
+ 
+ 	if (wl->profile->active) {
+-		scbval.val = reason_code;
+ 		memcpy(&scbval.ea, &wl->bssid, ETHER_ADDR_LEN);
+-		scbval.val = htod32(scbval.val);
+-		err = wl_dev_ioctl(dev, WLC_DISASSOC, &scbval, sizeof(scb_val_t));
++		scbval.val = htod32(reason_code);
++		err = wl_dev_ioctl(dev, WLC_DISASSOC, &scbval, sizeof(scbval));
+ 		if (err) {
+ 			WL_ERR(("error (%d)\n", err));
+ 			return err;
+ 		}
++	} else {
++	    return -EIO;
+ 	}
+ 
+ 	return err;
diff -Nru broadcom-sta-6.30.223.271/debian/patches/24-wl-Use-the-right-enums-for-cfg80211_get_bss.patch broadcom-sta-6.30.223.271/debian/patches/24-wl-Use-the-right-enums-for-cfg80211_get_bss.patch
--- broadcom-sta-6.30.223.271/debian/patches/24-wl-Use-the-right-enums-for-cfg80211_get_bss.patch	1970-01-01 09:00:00.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/24-wl-Use-the-right-enums-for-cfg80211_get_bss.patch	2021-05-04 18:11:49.000000000 +0900
@@ -0,0 +1,22 @@
+From: Diego Escalante Urrelo <diegoe@gnome.org>
+Date: Sun, 2 Aug 2020 19:54:56 -0500
+Subject: wl: Use the right enums for cfg80211_get_bss
+
+---
+ amd64/src/wl/sys/wl_cfg80211_hybrid.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/amd64/src/wl/sys/wl_cfg80211_hybrid.c b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+index 1801f70..c4b1154 100644
+--- a/amd64/src/wl/sys/wl_cfg80211_hybrid.c
++++ b/amd64/src/wl/sys/wl_cfg80211_hybrid.c
+@@ -2304,7 +2304,8 @@ static s32 wl_update_bss_info(struct wl_cfg80211_priv *wl)
+ 
+ 	ssid = &wl->profile->ssid;
+ 	bss = cfg80211_get_bss(wl_to_wiphy(wl), NULL, (s8 *)&wl->bssid,
+-	      ssid->SSID, ssid->SSID_len, WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
++			       ssid->SSID, ssid->SSID_len,
++			       IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY);
+ 
+ 	rtnl_lock();
+ 	if (!bss) {
diff -Nru broadcom-sta-6.30.223.271/debian/patches/series broadcom-sta-6.30.223.271/debian/patches/series
--- broadcom-sta-6.30.223.271/debian/patches/series	2020-09-27 20:26:10.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/patches/series	2021-05-04 18:11:49.000000000 +0900
@@ -15,3 +15,10 @@
 15-linux51.patch
 16-linux56.patch
 17-Get-rid-of-get_fs-set_fs-calls.patch
+18-wl-Make-sure-power_mgmt-settings-are-honored.patch
+19-wl-Fix-get-set-values-for-tx_power.patch
+20-wl-Fix-mac-address-setting.patch
+21-wl-Fix-misleading-indentation.patch
+22-wl-Fix-fall-through-warnings.patch
+23-wl-Avoid-disconnecting-invalid-interface.patch
+24-wl-Use-the-right-enums-for-cfg80211_get_bss.patch
diff -Nru broadcom-sta-6.30.223.271/debian/README.source broadcom-sta-6.30.223.271/debian/README.source
--- broadcom-sta-6.30.223.271/debian/README.source	2020-09-27 20:26:10.000000000 +0900
+++ broadcom-sta-6.30.223.271/debian/README.source	2021-05-04 18:11:49.000000000 +0900
@@ -6,3 +6,8 @@
 documented in 
         /usr/share/doc/quilt/README.source
 
+
+Some git repo for future reference:
+ - https://www.archlinux.org/packages/community/x86_64/broadcom-wl
+ - https://pkgs.rpmfusion.org/cgit/nonfree/wl-kmod.git
+ - https://github.com/antoineco/broadcom-wl/tree/patch-linux4.7
