Package: hplip
Version: 3.21.2+dfsg1-2
Severity: normal
X-Debbugs-Cc: [email protected]
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
print driver failed after upgrade to bullseye
* What exactly did you do (or not do) that was effective (or
ineffective)?
Instlled latest hplip; deleted existing driver and installed printer HP
Laserjet Pro P1102w
* What was the outcome of this action
The install insists on the installation of a proprietary plugin. However,
attempts to install that plugin from HP CD fails because the workstation does
not have a WiFi port
HPLIP does offer the option of USB vs WiFi connection. However, chosing USB
appears ineffectual. The setup still insists that the plugin is missing.
* What outcome did you expect instead?
Successful test print
-- Package-specific info:
Saving output in log file: /home/william/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-11 version is not supported. Using debian-10.7 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13) GNU/Linux
Host: lakemonster
Proc: 5.10.0-17-amd64 #1 SMP Debian 5.10.136-1 (2022-08-13) GNU/Linux
Distribution: debian 11
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro 11 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.19.12
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = true
last_upgraded_time = 1622658707
pending_upgrade_time = 0
[installation]
date_time = 08/25/22 08:27:03
version = 3.21.2
[last_used]
device_uri =
hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W449M6HSI1c
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 9.53.3 OK -
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system
REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework
OPTIONAL - 0.105 OK -
network network -wget
OPTIONAL - 1.21 OK -
avahi-utils avahi-utils
OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library
REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - OK -
cups-image CUPS image - CUPS image development files
REQUIRED - - OK -
libpthread libpthread - POSIX threads library
REQUIRED - b'2.31' OK -
libusb libusb - USB library
REQUIRED - 1.0 OK -
sane SANE - Scanning library
REQUIRED - - OK -
sane-devel SANE - Scanning library development files
REQUIRED - - OK -
error: libavahi-dev libavahi-dev
REQUIRED - - MISSING 'libavahi-dev
needs to be installed'
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 5.9 OK -
libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.9.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - OK
-
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries
REQUIRED - 2.2.10 OK -
python3-devel Python devel - Python development files
REQUIRED 2.2 3.9.2 OK -
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 8.1.2 OK
-
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services
REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension
REQUIRED - 3.21.2 OK -
hpmudext IO-Extension
REQUIRED - 3.21.2 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.21.2 OK 'hpaio found in
/etc/sane.d/dll.conf'
scanext Scan-SANE-Extension
REQUIRED - 3.21.2 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
--------------------------------------------------------------------
----------------------------------------
hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W449M6HPR1a HP
LaserJet Professional P 1102w
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-Professional-P-1102w
--------------------------------
Type: Unknown
Device URI:
usb://HP/LaserJet%20Professional%20P%201102w?serial=000000000W449M6HPR1a
PPD: /etc/cups/ppd/HP-LaserJet-Professional-P-1102w.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-Professional-P-1102w.ppd ppd
file
PPD Description:
Printer status: printer HP-LaserJet-Professional-P-1102w is idle. enabled
since Thu Aug 25 08:08:07 2022
Rendering completed
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
USB None Required - -
OK Node:'/dev/bus/usb/001/003' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 1
Done.
-- System Information:
Debian Release: 11.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-17-amd64 (SMP w/8 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages hplip depends on:
ii adduser 3.118
ii cups 2.3.3op2-3+deb11u2
ii hplip-data 3.21.2+dfsg1-2
ii libc6 2.31-13+deb11u3
ii libcups2 2.3.3op2-3+deb11u2
ii libdbus-1-3 1.12.20-2
ii libhpmud0 3.21.2+dfsg1-2
ii libpython3.9 3.9.2-1
ii libsane-hpaio 3.21.2+dfsg1-2
ii libsane1 1.0.31-4.1
ii lsb-base 11.1.0
ii printer-driver-hpcups 3.21.2+dfsg1-2
ii python3 3.9.2-3
ii python3-dbus 1.2.16-5
ii python3-gi 3.38.0-2
ii python3-pexpect 4.8.0-2
ii python3-pil 8.1.2+dfsg-0.3+deb11u1
ii python3-reportlab 3.5.59-2
ii wget 1.21-1+deb11u1
ii xz-utils 5.2.5-2.1~deb11u1
Versions of packages hplip recommends:
ii avahi-daemon 0.8-5
ii policykit-1 0.105-31+deb11u1
ii printer-driver-postscript-hp 3.21.2+dfsg1-2
ii sane-utils 1.0.31-4.1
Versions of packages hplip suggests:
ii hplip-doc 3.21.2+dfsg1-2
ii hplip-gui 3.21.2+dfsg1-2
ii python3-notify2 0.3-4
ii system-config-printer 1.5.14-1
-- no debconf information
