Smell like the program need x in ordre to run... Le 28 mai 2013 07:45, "Andrey Paramonov" <cmr.p...@gmail.com> a écrit :
> Package: hplip > Version: 3.13.4-1 > Severity: serious > > Dear Maintainer, > > My printer LaserJet1018 works no more with latest hplip package. > Printer can be detected and setup via hp-setup just nicely, but for any > job (incl. test page) I get: > > stopped > "/usr/lib/cups/filter/hpcups failed" > > Also, when I reboot with my printer plugged-in, my system doesn't boot. > This is I believe the relevant part from /var/log/messages: > > May 28 08:42:09 sol kernel: [ 26.243235] lp: driver loaded but no > devices found > May 28 08:42:09 sol kernel: [ 26.273256] ppdev: user-space parallel port > driver > May 28 08:46:22 sol kernel: [ 278.743066] usb 1-1.2: USB disconnect, > device number 3 > May 28 08:46:41 sol hp-probe: hp-probe[5284]: warning: hp-probe should not > be run as root/superuser. > May 28 08:46:48 sol kernel: [ 304.274112] usb 2-1.1: new high-speed USB > device number 4 using ehci_hcd > May 28 08:46:48 sol kernel: [ 304.386512] usb 2-1.1: New USB device > found, idVendor=03f0, idProduct=4117 > May 28 08:46:48 sol kernel: [ 304.386519] usb 2-1.1: New USB device > strings: Mfr=1, Product=2, SerialNumber=3 > May 28 08:46:48 sol kernel: [ 304.386524] usb 2-1.1: Product: HP LaserJet > 1018 > May 28 08:46:48 sol kernel: [ 304.386528] usb 2-1.1: Manufacturer: > Hewlett-Packard > May 28 08:46:48 sol kernel: [ 304.386531] usb 2-1.1: SerialNumber: KP3FK5P > May 28 08:46:48 sol kernel: [ 304.389903] usblp0: USB Bidirectional > printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117 > May 28 08:46:48 sol logger: loading hp_laserjet_1018 firmware 002 004 > May 28 08:46:48 sol hp-firmware: hp-firmware[5293]: warning: No display > found. > May 28 08:46:51 sol kernel: [ 307.498939] usblp0: removed > May 28 08:47:19 sol hp-setup: hp-setup[5325]: warning: Qt/PyQt 4 > initialization failed. > May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: hp-testpage > should not be run as root/superuser. > May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: Qt/PyQt 4 > initialization failed. > May 28 08:48:22 sol hp-firmware: hp-firmware[5427]: warning: Qt/PyQt 4 > initialization failed. > > I'm ready to provide any additional info, > Andrey Paramonov > > -- Package-specific info: > > > -- System Information: > Debian Release: jessie/sid > APT prefers testing > APT policy: (1000, 'testing'), (200, 'unstable'), (1, 'experimental') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) > Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages hplip depends on: > ii adduser 3.113+nmu3 > ii coreutils 8.13-3.5 > ii cups 1.5.3-5 > ii hplip-data 3.13.4-1 > ii libc6 2.17-3 > ii libcups2 1.5.3-5 > ii libdbus-1-3 1.6.10-1 > ii libhpmud0 3.13.4-1 > ii libsane 1.0.22-7.4 > ii libsane-hpaio 3.13.4-1 > ii libsnmp15 5.4.3~dfsg-3 > ii libssl1.0.0 1.0.1e-2 > ii libusb-1.0-0 2:1.0.15-1 > ii lsb-base 4.1+Debian11 > ii policykit-1 0.105-3 > ii printer-driver-hpcups 3.13.4-1 > ii python 2.7.3-5 > ii python-dbus 1.2.0-1 > ii python-gobject-2 2.28.6-12+b1 > ii python-imaging 1.1.7-4 > ii python-pexpect 2.4-1 > ii python-reportlab 2.5-1.1 > ii wget 1.14-1 > > Versions of packages hplip recommends: > ii avahi-daemon 0.6.31-2 > ii printer-driver-postscript-hp 3.13.4-1 > ii sane-utils 1.0.22-7.4 > > Versions of packages hplip suggests: > pn hplip-doc <none> > pn hplip-gui <none> > ii python-notify 0.1.1-3 > pn system-config-printer <none> > > -- no debconf information > >
