Package: libsane-hpaio Version: 3.12.6-3 Severity: normal The sane hpaio driver in the libsane-hpaio package causes a scanimage (tested with scanimage -L) segmentation fault in about 20% of runs.
The scanimage output is attached. I am not using the hpaio backend; the scanner is a Canon CanoScan LiDE 110. The problem disappears when the 'hpaio' line in /etc/sane.d/dll.d/hplip is removed/commented. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (800, 'testing'), (700, 'unstable'), (1, 'stable-updates'), (1, 'experimental'), (1, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libsane-hpaio depends on: ii libc6 2.13-33 ii libcups2 1.5.3-1 ii libdbus-1-3 1.6.0-1 ii libhpmud0 3.12.6-3 ii libssl1.0.0 1.0.1c-3 Versions of packages libsane-hpaio recommends: ii hplip 3.12.6-3 ii sane-utils 1.0.22-7.3 libsane-hpaio suggests no packages. -- no debconf information
[sanei_debug] Setting debug level of dll to 3. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22 [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] add_backend: adding backend `ls5000' [dll] add_backend: adding backend `hpaio' [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' [dll] sane_get_devices [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' [dll] init: initializing backend `xerox_mfp' [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' [dll] init: initializing backend `v4l' [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' [dll] init: initializing backend `rts8891' [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' [dll] init: initializing backend `magicolor' [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' [dll] init: initializing backend `kvs20xx' [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' [dll] init: initializing backend `kvs1025' [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' [dll] init: initializing backend `kodak' [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' [dll] init: initializing backend `coolscan3' [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' Segmentation fault
signature.asc
Description: Digital signature
