I wasn't so precise, "stuck" means after that line prompt stop blinking and Mac seems to be frozen. Force restart only left. I attached dmesg. -- Wiadomość wysłana za pomocą serwisu Tutanota, oferującego bezpieczną i wolną od reklam usługę e-mail: https://tutanota.com
[ 0.000000] Total memory = 1024MB; using 2048kB for hash table [ 0.000000] Activating Kernel Userspace Execution Prevention [ 0.000000] Activating Kernel Userspace Access Protection [ 0.000000] Linux version 5.10.0-3-powerpc (debian-ker...@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 Debian 5.10.12-1 (2021-01-30) [ 0.000000] Found initrd at 0xc3000000:0xc466d8a6 [ 0.000000] ioremap() called early from pmac_feature_init+0xd4/0xad4. Use early_ioremap() instead [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xff3c0000 [ 0.000000] ioremap() called early from probe_one_macio+0x17c/0x2b4. Use early_ioremap() instead [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0x(ptrval) [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: Mac mini [ 0.000000] ioremap() called early from btext_map+0x6c/0xc4. Use early_ioremap() instead [ 0.000000] Using PowerMac machine description [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x40000000 [ 0.000000] dcache_bsize = 0x20 [ 0.000000] icache_bsize = 0x20 [ 0.000000] cpu_features = 0x000000002510600a [ 0.000000] possible = 0x00000000277de14a [ 0.000000] always = 0x0000000001000000 [ 0.000000] cpu_user_features = 0x9c000001 0x00000000 [ 0.000000] mmu_features = 0x00010001 [ 0.000000] Hash_size = 0x200000 [ 0.000000] Hash_mask = 0x7fff [ 0.000000] ----------------------------------------------------- [ 0.000000] ioremap() called early from pmac_pci_init+0x220/0x784. Use early_ioremap() instead [ 0.000000] ioremap() called early from pmac_pci_init+0x234/0x784. Use early_ioremap() instead [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] ioremap() called early from pci_process_bridge_OF_ranges+0x164/0x2dc. Use early_ioremap() instead [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] ioremap() called early from pmac_pci_init+0x220/0x784. Use early_ioremap() instead [ 0.000000] ioremap() called early from pmac_pci_init+0x234/0x784. Use early_ioremap() instead [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] ioremap() called early from pci_process_bridge_OF_ranges+0x164/0x2dc. Use early_ioremap() instead [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] ioremap() called early from pmac_pci_init+0x220/0x784. Use early_ioremap() instead [ 0.000000] ioremap() called early from pmac_pci_init+0x234/0x784. Use early_ioremap() instead [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] ioremap() called early from pci_process_bridge_OF_ranges+0x164/0x2dc. Use early_ioremap() instead [ 0.000000] ioremap() called early from pmac_setup_arch+0x11c/0x294. Use early_ioremap() instead [ 0.000000] ioremap() called early from find_via_pmu+0x21c/0x540. Use early_ioremap() instead [ 0.000000] ioremap() called early from find_via_pmu+0x248/0x540. Use early_ioremap() instead [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 55 [ 0.000000] ioremap() called early from pmac_nvram_init+0x150/0x53c. Use early_ioremap() instead [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=432, gen1=433 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinux-5.10.0-3-powerpc root=UUID=97102589-3022-4999-9898-4155782bb426 ro quiet [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 998644K/1048576K available (9836K kernel code, 1124K rwdata, 2276K rodata, 1116K init, 393K bss, 49932K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xffbcf000..0xfffff000 : fixmap [ 0.000000] * 0xff400000..0xff800000 : highmem PTEs [ 0.000000] * 0xfdad8000..0xff400000 : early ioremap [ 0.000000] * 0xf1000000..0xfdad8000 : vmalloc & ioremap [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x3c/0x454 with crng_init=0 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 27496 entries in 81 pages [ 0.000000] ftrace: allocated 81 pages with 3 groups [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.620997 MHz [ 0.000000] time_init: processor frequency = 1249.999995 MHz [ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x9995d18e3, max_idle_ns: 440795203336 ns [ 0.000018] clocksource: timebase mult[1806bddd] shift[24] registered [ 0.000033] clockevent: decrementer mult[aa7ac75] shift[32] cpu[0] [ 0.000276] Console: colour dummy device 80x25 [ 0.000286] printk: console [tty0] enabled [ 0.000289] printk: bootconsole [udbg0] disabled [ 0.000537] pid_max: default: 32768 minimum: 301 [ 0.000703] LSM: Security Framework initializing [ 0.000760] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000911] AppArmor: AppArmor initialized [ 0.000919] TOMOYO Linux initialized [ 0.000991] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001007] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002347] MPC7450 family performance monitor hardware support registered [ 0.003444] devtmpfs: initialized [ 0.003623] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1" [ 0.006601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.006620] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.007081] NET: Registered protocol family 16 [ 0.007450] audit: initializing netlink subsys (disabled) [ 0.007929] thermal_sys: Registered thermal governor 'fair_share' [ 0.007935] thermal_sys: Registered thermal governor 'bang_bang' [ 0.007937] thermal_sys: Registered thermal governor 'step_wise' [ 0.007940] thermal_sys: Registered thermal governor 'user_space' [ 0.008369] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.008376] channel 0 bus <multibus> [ 0.008380] channel 1 bus <multibus> [ 0.008456] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.008460] channel 0 bus <multibus> [ 0.008506] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.008509] channel 1 bus <multibus> [ 0.008525] channel 2 bus <multibus> [ 0.008896] PCI: Probing PCI hardware [ 0.009129] PCI host bridge to bus 0000:00 [ 0.009144] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) [ 0.009149] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.009154] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.009160] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.009167] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.009545] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 [ 0.010042] pci 0000:00:10.0: [1002:5962] type 00 class 0x030000 [ 0.010058] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref] [ 0.010066] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff] [ 0.010075] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.010097] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.010130] pci 0000:00:10.0: supports D1 D2 [ 0.010875] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.011266] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle [ 0.011304] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle [ 0.011327] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle [ 0.011867] PCI host bridge to bus 0001:10 [ 0.011873] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff] [ 0.011878] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff] [ 0.011882] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff] [ 0.011886] pci_bus 0001:10: root bus resource [bus 10-ff] [ 0.011892] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff [ 0.012136] audit: type=2000 audit(1632483054.004:1): state=initialized audit_enabled=0 res=1 [ 0.012307] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000 [ 0.012798] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000 [ 0.012814] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.013175] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle [ 0.013202] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle [ 0.013225] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle [ 0.013616] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310 [ 0.013631] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.013780] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310 [ 0.013795] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 0.013948] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310 [ 0.013963] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff] [ 0.014304] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310 [ 0.014320] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.014374] pci 0001:10:1b.0: supports D1 D2 [ 0.014379] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.014669] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310 [ 0.014684] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.014738] pci 0001:10:1b.1: supports D1 D2 [ 0.014742] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.015061] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.015076] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.015129] pci 0001:10:1b.2: supports D1 D2 [ 0.015133] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.015544] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10 [ 0.016066] PCI host bridge to bus 0002:20 [ 0.016074] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) [ 0.016079] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff] [ 0.016084] pci_bus 0002:20: root bus resource [bus 20-ff] [ 0.016089] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff [ 0.016452] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000 [ 0.016638] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000 [ 0.016650] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff] [ 0.017106] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010 [ 0.017119] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff] [ 0.017161] pci 0002:20:0e.0: supports D1 D2 [ 0.017165] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.017597] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000 [ 0.017611] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff] [ 0.017640] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref] [ 0.018530] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20 [ 0.018688] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.018705] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff] [ 0.018710] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.018714] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.018724] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff] [ 0.018729] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff] [ 0.018733] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff] [ 0.018739] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff] [ 0.018743] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff] [ 1.028944] iommu: Default domain type: Translated [ 1.029082] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 1.029097] pci 0000:00:10.0: vgaarb: bridge control possible [ 1.029102] pci 0000:00:10.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 1.029105] vgaarb: loaded [ 1.029429] SCSI subsystem initialized [ 1.029572] libata version 3.00 loaded. [ 1.030248] NetLabel: Initializing [ 1.030254] NetLabel: domain hash size = 128 [ 1.030257] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.030304] NetLabel: unlabeled traffic allowed by default [ 1.030366] clocksource: Switched to clocksource timebase [ 1.064984] VFS: Disk quotas dquot_6.6.0 [ 1.065058] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.065485] AppArmor: AppArmor Filesystem Enabled [ 1.070162] NET: Registered protocol family 2 [ 1.070725] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.070791] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.070869] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.070907] TCP: Hash tables configured (established 8192 bind 8192) [ 1.071084] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.071114] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.071280] NET: Registered protocol family 1 [ 1.071300] NET: Registered protocol family 44 [ 1.071356] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 1.071366] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed. [ 1.071375] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 1.071378] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed. [ 1.071397] pci 0001:10:1a.0: enabling device (0000 -> 0002) [ 1.071447] pci 0001:10:1b.0: enabling device (0000 -> 0002) [ 1.071472] pci 0001:10:1b.1: enabling device (0000 -> 0002) [ 1.071495] pci 0001:10:1b.2: enabling device (0004 -> 0006) [ 1.071532] pci 0002:20:0f.0: CLS mismatch (32 != 1020), using 32 bytes [ 1.071742] Trying to unpack rootfs image as initramfs... [ 2.049613] Freeing initrd memory: 22964K [ 2.050039] Thermal assist unit not available [ 2.051104] Initialise system trusted keyrings [ 2.051150] Key type blacklist registered [ 2.051354] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.055501] zbud: loaded [ 2.056015] integrity: Platform Keyring initialized [ 2.056028] Key type asymmetric registered [ 2.056032] Asymmetric key parser 'x509' registered [ 2.056374] bounce: pool size: 64 pages [ 2.056487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.056820] io scheduler mq-deadline registered [ 2.057672] Using unsupported 640x480 (null) at 9c008000, depth=8, pitch=768 [ 2.058117] Console: switching to colour frame buffer device 80x30 [ 2.064127] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,RockHopper2Parent@10/ATY,RockHopper2_A@0 [ 2.064432] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.065344] pmac_zilog: 0.6 (Benjamin Herrenschmidt <b...@kernel.crashing.org>) [ 2.065369] Serial: MPC52xx PSC UART driver [ 2.065491] Non-volatile memory driver v1.3 [ 2.065495] Linux agpgart interface v0.103 [ 2.065531] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset [ 2.066979] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 2.067133] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 2.067336] MacIO PCI driver attached to Intrepid chipset [ 2.068327] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 2.068795] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 2.069643] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002) [ 2.086375] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 [ 2.086909] scsi host0: pata_macio [ 2.087111] ata1: PATA max UDMA/100 irq 39 [ 2.272425] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100 [ 2.272433] ata1.00: 312581808 sectors, multi 16: LBA48 [ 2.272448] ata1.01: ATAPI: MATSHITACD-RW CW-8124, DACD, max UDMA/33 [ 2.310857] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC 0-10 PQ: 0 ANSI: 5 [ 2.331265] scsi 0:0:1:0: CD-ROM MATSHITA CD-RW CW-8124 DACD PQ: 0 ANSI: 5 [ 3.138372] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 [ 3.138942] scsi host1: pata_macio [ 3.139069] ata2: PATA max MWDMA2 irq 24 [ 3.139442] mousedev: PS/2 mouse device common for all mice [ 3.141546] rtc-generic rtc-generic: registered as rtc0 [ 3.143671] rtc-generic rtc-generic: setting system clock to 2021-09-24T11:30:57 UTC (1632483057) [ 3.143799] PowerMac i2c bus pmu 2 registered [ 3.143883] PowerMac i2c bus pmu 1 registered [ 3.144023] PowerMac i2c bus mac-io 0 registered [ 3.144097] PowerMac i2c bus uni-n 1 registered [ 3.144107] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0 [ 3.144466] PowerMac i2c bus uni-n 0 registered [ 3.144609] ledtrig-cpu: registered to indicate activity on CPUs [ 3.145105] NET: Registered protocol family 10 [ 3.183209] Segment Routing with IPv6 [ 3.183297] mip6: Mobile IPv6 [ 3.183307] NET: Registered protocol family 17 [ 3.183445] mpls_gso: MPLS GSO support [ 3.183503] drmem: No dynamic reconfiguration memory found [ 3.183644] registered taskstats version 1 [ 3.183657] Loading compiled-in X.509 certificates [ 3.414936] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.415003] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 3.415105] zswap: loaded using pool lzo/zbud [ 3.415478] Key type ._fscrypt registered [ 3.415483] Key type .fscrypt registered [ 3.415486] Key type fscrypt-provisioning registered [ 3.415592] AppArmor: AppArmor sha1 policy hashing enabled [ 3.416151] input: PMU as /devices/virtual/input/input0 [ 3.421039] Freeing unused kernel memory: 1116K [ 3.421050] This architecture does not have kernel memory protection. [ 3.421066] Run /init as init process [ 3.421072] with arguments: [ 3.421076] /init [ 3.421078] with environment: [ 3.421081] HOME=/ [ 3.421083] TERM=linux [ 3.421086] BOOT_IMAGE=/boot/vmlinux-5.10.0-3-powerpc [ 3.691307] usb_common: module verification failed: signature and/or required key missing - tainting kernel [ 3.789333] usbcore: registered new interface driver usbfs [ 3.789381] usbcore: registered new interface driver hub [ 3.789433] usbcore: registered new device driver usb [ 3.792952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.809862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.816975] ehci-pci: EHCI PCI platform driver [ 3.817108] ehci-pci 0001:10:1b.2: EHCI Host Controller [ 3.817136] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1 [ 3.817263] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000 [ 3.830595] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00 [ 3.830796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.830803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.830807] usb usb1: Product: EHCI Host Controller [ 3.830810] usb usb1: Manufacturer: Linux 5.10.0-3-powerpc ehci_hcd [ 3.830814] usb usb1: SerialNumber: 0001:10:1b.2 [ 3.831306] hub 1-0:1.0: USB hub found [ 3.831337] hub 1-0:1.0: 5 ports detected [ 3.832734] ohci-pci: OHCI PCI platform driver [ 3.832776] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 3.832802] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 3.832872] ohci-pci 0001:10:1a.0: OHCI PCI host controller [ 3.832903] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2 [ 3.833023] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000 [ 3.838986] sungem.c:v1.0 David S. Miller <da...@redhat.com> [ 3.839698] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:7d:77:52 [ 3.859534] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) [ 3.866165] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.866183] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.910792] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.910834] sd 0:0:0:0: [sda] Write Protect is off [ 3.910842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.910890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.911471] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.918946] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 3.945352] sda: [mac] sda1 sda2 sda3 sda4 sda5 [ 3.946723] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.971163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 3.971176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.971180] usb usb2: Product: OHCI PCI host controller [ 3.971184] usb usb2: Manufacturer: Linux 5.10.0-3-powerpc ohci_hcd [ 3.971188] usb usb2: SerialNumber: 0001:10:1a.0 [ 3.973665] hub 2-0:1.0: USB hub found [ 3.973712] hub 2-0:1.0: 2 ports detected [ 3.977183] ohci-pci 0001:10:1b.0: OHCI PCI host controller [ 3.977233] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3 [ 3.977315] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000 [ 4.025210] gem 0002:20:0f.0 enP2p32s15f0: renamed from eth0 [ 4.069350] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 4.069363] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.069367] usb usb3: Product: OHCI PCI host controller [ 4.069371] usb usb3: Manufacturer: Linux 5.10.0-3-powerpc ohci_hcd [ 4.069375] usb usb3: SerialNumber: 0001:10:1b.0 [ 4.070785] hub 3-0:1.0: USB hub found [ 4.070821] hub 3-0:1.0: 3 ports detected [ 4.072624] ohci-pci 0001:10:1b.1: OHCI PCI host controller [ 4.072647] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4 [ 4.072740] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000 [ 4.150842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 4.150855] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.150859] usb usb4: Product: OHCI PCI host controller [ 4.150862] usb usb4: Manufacturer: Linux 5.10.0-3-powerpc ohci_hcd [ 4.150866] usb usb4: SerialNumber: 0001:10:1b.1 [ 4.152803] hub 4-0:1.0: USB hub found [ 4.152840] hub 4-0:1.0: 2 ports detected [ 4.210512] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.383856] usb 1-1: New USB device found, idVendor=7392, idProduct=7717, bcdDevice= 1.01 [ 4.383869] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.383873] usb 1-1: Product: 802.11 n WLAN [ 4.383877] usb 1-1: Manufacturer: Ralink [ 4.383881] usb 1-1: SerialNumber: 1.0 [ 4.450642] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffe7d7752, S400 [ 4.522479] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 4.679967] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 4.679980] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.679984] usb 1-2: Product: USB2.0 Hub [ 4.680850] hub 1-2:1.0: USB hub found [ 4.681293] hub 1-2:1.0: 4 ports detected [ 4.970442] usb 1-2.1: new low-speed USB device number 4 using ehci-pci [ 4.971584] random: fast init done [ 5.022888] PM: Image not found (code -22) [ 5.086774] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c316, bcdDevice=28.00 [ 5.086788] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.086792] usb 1-2.1: Product: Logitech USB Keyboard [ 5.086796] usb 1-2.1: Manufacturer: Logitech [ 5.111550] hid: raw HID events driver (C) Jiri Kosina [ 5.130883] usbcore: registered new interface driver usbhid [ 5.130894] usbhid: USB HID core driver [ 5.141827] input: Logitech Logitech USB Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C316.0001/input/input1 [ 5.170389] usb 1-2.3: new low-speed USB device number 5 using ehci-pci [ 5.200068] hid-generic 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0001:10:1b.2-2.1/input0 [ 5.200840] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C316.0002/input/input2 [ 5.258579] input: Logitech Logitech USB Keyboard System Control as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.1/0003:046D:C316.0002/input/input3 [ 5.259252] hid-generic 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0001:10:1b.2-2.1/input1 [ 5.284792] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00 [ 5.284805] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.284809] usb 1-2.3: Product: USB Laser Mouse [ 5.284813] usb 1-2.3: Manufacturer: Logitech [ 5.290345] input: Logitech USB Laser Mouse as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C062.0003/input/input4 [ 5.290667] hid-generic 0003:046D:C062.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0001:10:1b.2-2.3/input0 [ 5.773382] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 6.131049] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 7.208890] random: crng init done [ 8.086397] systemd[1]: Inserted module 'autofs4' [ 8.350237] systemd[1]: systemd 247.9-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 8.350685] systemd[1]: Detected architecture ppc. [ 8.382507] systemd[1]: Set hostname to <debian>. [ 10.302918] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 10.548608] systemd[1]: Queued start job for default target Graphical Interface. [ 10.552662] systemd[1]: Created slice Slice /system/getty. [ 10.554060] systemd[1]: Created slice Slice /system/modprobe. [ 10.555338] systemd[1]: Created slice Slice /system/systemd-fsck. [ 10.556212] systemd[1]: Created slice User and Session Slice. [ 10.556573] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.557386] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.557868] systemd[1]: Reached target Remote File Systems. [ 10.557934] systemd[1]: Reached target Slices. [ 10.558802] systemd[1]: Listening on Syslog Socket. [ 10.559344] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.559625] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.560549] systemd[1]: Listening on Journal Audit Socket. [ 10.561052] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.561621] systemd[1]: Listening on Journal Socket. [ 10.570589] systemd[1]: Listening on udev Control Socket. [ 10.571111] systemd[1]: Listening on udev Kernel Socket. [ 10.571861] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 10.575765] systemd[1]: Mounting POSIX Message Queue File System... [ 10.582713] systemd[1]: Mounting Kernel Debug File System... [ 10.590355] systemd[1]: Mounting Kernel Trace File System... [ 10.635410] systemd[1]: Starting Set the console keyboard layout... [ 10.646174] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 10.658627] systemd[1]: Starting Load Kernel Module configfs... [ 10.675023] systemd[1]: Starting Load Kernel Module drm... [ 10.695090] systemd[1]: Starting Load Kernel Module fuse... [ 10.840920] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.841307] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.849196] systemd[1]: Starting Journal Service... [ 10.937805] systemd[1]: Starting Load Kernel Modules... [ 10.946952] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.951839] systemd[1]: Starting Coldplug All udev Devices... [ 10.964125] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 10.965763] systemd[1]: modprobe@configfs.service: Succeeded. [ 10.966819] systemd[1]: Finished Load Kernel Module configfs. [ 10.971506] systemd[1]: Mounting Kernel Configuration File System... [ 10.984432] fuse: init (API version 7.32) [ 10.991059] systemd[1]: modprobe@fuse.service: Succeeded. [ 10.992079] systemd[1]: Finished Load Kernel Module fuse. [ 10.996869] systemd[1]: Mounting FUSE Control File System... [ 11.120046] systemd[1]: Mounted POSIX Message Queue File System. [ 11.120673] systemd[1]: Mounted Kernel Trace File System. [ 11.121072] systemd[1]: Mounted Kernel Configuration File System. [ 11.121433] systemd[1]: Mounted FUSE Control File System. [ 11.200664] systemd[1]: Mounted Kernel Debug File System. [ 11.245837] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 11.270630] systemd[1]: Finished Remount Root and Kernel File Systems. [ 11.271423] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.283491] systemd[1]: Starting Load/Save Random Seed... [ 11.307795] systemd[1]: Starting Create System Users... [ 11.507342] systemd[1]: modprobe@drm.service: Succeeded. [ 11.508540] systemd[1]: Finished Load Kernel Module drm. [ 11.562817] systemd[1]: Finished Load Kernel Modules. [ 11.571982] systemd[1]: Starting Apply Kernel Variables... [ 11.908456] systemd[1]: Started Journal Service. [ 12.263415] systemd-journald[166]: Received client request to flush runtime journal. [ 12.779369] systemd-journald[166]: File /var/log/journal/eed11cb74df243f0a451484f693e6ab2/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 15.421671] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.421844] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 16.569641] [drm] radeon kernel modesetting enabled. [ 16.569745] checking generic (9c008000 5a000) vs hw (98000000 8000000) [ 16.569750] fb0: switching to radeondrmfb from OFfb ATY,RockHo [ 16.578755] Console: switching to colour dummy device 80x25 [ 16.578904] radeon 0000:00:10.0: vgaarb: deactivate vga console [ 16.579054] radeon 0000:00:10.0: enabling device (0006 -> 0007) [ 16.579454] [drm] initializing kernel modesetting (RV280 0x1002:0x5962 0x1002:0x5962 0x01). [ 16.579466] [drm] Forcing AGP to PCI mode [ 16.579534] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000 [ 16.579551] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000 [ 16.579994] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate a BIOS ROM [ 16.580028] [drm] Using device-tree clock info [ 16.580033] [drm] Generation 2 PCI interface, using max accessible memory [ 16.580042] radeon 0000:00:10.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used) [ 16.580048] radeon 0000:00:10.0: GTT: 512M 0x0000000078000000 - 0x0000000097FFFFFF [ 16.580082] [drm] Detected VRAM RAM=128M, BAR=128M [ 16.580087] [drm] RAM width 64bits DDR [ 16.594490] [TTM] Zone kernel: Available graphics memory: 380290 KiB [ 16.594501] [TTM] Zone highmem: Available graphics memory: 511362 KiB [ 16.594504] [TTM] Initializing pool allocator [ 16.594579] [drm] radeon: 32M of VRAM memory ready [ 16.594584] [drm] radeon: 512M of GTT memory ready. [ 16.594649] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 16.599214] [drm] PCI GART of 512M enabled (table at 0x0000000003A00000). [ 16.613598] radeon 0000:00:10.0: WB disabled [ 16.613620] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000078000000 [ 16.618437] [drm] radeon: irq initialized. [ 16.618489] [drm] Loading R200 Microcode [ 17.161788] radeon 0000:00:10.0: firmware: direct-loading firmware radeon/R200_cp.bin [ 17.165860] [drm] radeon: ring at 0x0000000078001000 [ 17.165902] [drm] ring test succeeded in 0 usecs [ 17.169605] [drm] ib test succeeded in 0 usecs [ 17.170174] [drm] Connector Table: 7 (mini internal tmds) [ 17.170189] [drm] No TMDS info found in BIOS [ 17.170197] [drm] No TV DAC info found in BIOS [ 17.184711] [drm] Radeon Display Connectors [ 17.184722] [drm] Connector 0: [ 17.184725] [drm] DVI-I-1 [ 17.184727] [drm] HPD1 [ 17.184732] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 17.184734] [drm] Encoders: [ 17.184737] [drm] DFP1: INTERNAL_TMDS1 [ 17.184740] [drm] CRT2: INTERNAL_DAC2 [ 17.184742] [drm] Connector 1: [ 17.184744] [drm] SVIDEO-1 [ 17.184746] [drm] Encoders: [ 17.184748] [drm] TV1: INTERNAL_DAC2 [ 17.347509] [drm] fb mappable at 0x98040000 [ 17.347520] [drm] vram apper at 0x98000000 [ 17.347523] [drm] size 2592768 [ 17.347526] [drm] fb depth is 16 [ 17.347528] [drm] pitch is 2880 [ 17.556764] Console: switching to colour frame buffer device 180x56 [ 17.571832] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device [ 17.574602] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0 [ 18.211681] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.213143] cfg80211: Loaded X.509 cert 'b...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 18.215536] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 18.216912] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.298041] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 18.299149] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 18.802269] snd-aoa-fabric-layout: Using direct GPIOs [ 18.979051] snd-aoa-fabric-layout: can use this codec [ 19.095652] Adding 998848k swap on /dev/sda4. Priority:-2 extents:1 across:998848k FS [ 19.242440] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 19.410202] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected [ 19.466451] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected [ 19.466834] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.467973] usbcore: registered new interface driver rt2800usb [ 19.528778] rt2800usb 1-1:1.0 wlx001f1fa2b43c: renamed from wlan0 [ 21.120775] audit: type=1400 audit(1632483075.472:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/powerpc-linux-gnu/lightdm/lightdm-guest-session" pid=336 comm="apparmor_parser" [ 21.120796] audit: type=1400 audit(1632483075.472:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/powerpc-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=336 comm="apparmor_parser" [ 21.227335] audit: type=1400 audit(1632483075.580:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=338 comm="apparmor_parser" [ 21.270356] audit: type=1400 audit(1632483075.620:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=339 comm="apparmor_parser" [ 21.270422] audit: type=1400 audit(1632483075.620:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=339 comm="apparmor_parser" [ 21.544803] audit: type=1400 audit(1632483075.896:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=340 comm="apparmor_parser" [ 21.544820] audit: type=1400 audit(1632483075.896:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=340 comm="apparmor_parser" [ 21.544827] audit: type=1400 audit(1632483075.896:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=340 comm="apparmor_parser" [ 21.544834] audit: type=1400 audit(1632483075.896:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=340 comm="apparmor_parser" [ 21.544841] audit: type=1400 audit(1632483075.896:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=340 comm="apparmor_parser" [ 29.326240] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 30.319132] Bluetooth: Core ver 2.22 [ 30.319282] NET: Registered protocol family 31 [ 30.319286] Bluetooth: HCI device and connection manager initialized [ 30.323791] Bluetooth: HCI socket layer initialized [ 30.323803] Bluetooth: L2CAP socket layer initialized [ 30.323830] Bluetooth: SCO socket layer initialized [ 30.958686] sungem_phy: PHY ID: 4061e4, addr: 0 [ 30.959038] gem 0002:20:0f.0 enP2p32s15f0: Found BCM5221 PHY [ 31.986065] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 32.163360] rt2800usb 1-1:1.0: firmware: direct-loading firmware rt2870.bin [ 32.163389] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 44.621789] usb 1-1: USB disconnect, device number 2 g4@debian:~$
