Hi Adrian,
I have tested the PPC64 ISO from 2017-10-05 with our own stable longterm
kernel 4.9.52 [1]. We didn't have any issues with the installer in the
past. I just wanted to test your new ISO.
I booted your ISO with the following commands:
CFE> ramdisk -z -addr=0x24000000 -fs=iso
atapi0.1:install/powerpc64/initrd.gz
CFE> setenv bootargs "root=/dev/ramdisk"
CFE> boot -elf -noints -fatfs cf0:vmlinux-4.9
On 06 October 2017 at 4:12PM, John Paul Adrian Glaubitz wrote:
>
> Can you please elaborate a bit what you mean when you say partman is
not recognizing
> partitions? What exactly do you see? Does partman list your hard disk
at all?
Partman stops at 50%.
Output:
Oct 6 15:53:08 partman: No matching physical volumes found
Oct 6 15:53:08 partman: Reading all physical volumes. This may take
a while...
> Do you see the partitions when you switch to a shell and list the
partitions with
>
> cat /proc/partitions?
Yes, I see the partitions.
Output:
major minor #blocks name
8 0 1953514504 sda
8 1 119088 sda1
8 2 2100096 sda2
8 3 672670920 sda3
8 4 1278623448 sda4
11 0 231040 sr0
8 16 234431064 sdb
8 17 144364512 sdb1
8 18 1 sdb2
8 19 18500608 sdb3
8 20 40717312 sdb4
8 21 14684160 sdb5
8 22 8274944 sdb6
8 23 7885824 sdb7
8 32 250880 sdc
8 33 250608 sdc1
8 48 30031250 sdd
8 49 262144 sdd1
8 50 14336000 sdd2
>
> Can you please capture the output of "lspci" and "dmesg" and attach
them as
> files in your mail? Then I can verify whether your particular hardware is
> currently supported or not and what would be necessary to support it.
>
Please find attached the output of "lspci" and "dmesg".
Thanks,
Christian
[1] http://www.xenosoft.de/vmlinux-4.9.52-AmigaONE_X1000_X5000.tar.gz
(including kernel configs)
00:00.0 Host bridge: PA Semi, Inc PWRficient Host Bridge (rev 12)
00:01.0 Memory controller: PA Semi, Inc PWRficient L2 Cache (rev 11)
00:03.0 PIC: PA Semi, Inc PWRficient System/Debug Controller (rev 13)
00:04.0 RAM memory: PA Semi, Inc PWRficient DDR2 Memory Controller (rev 11)
00:05.0 RAM memory: PA Semi, Inc PWRficient DDR2 Memory Controller (rev 11)
00:08.0 Power PC: PA Semi, Inc PA6T Core (rev 12)
00:09.0 Power PC: PA Semi, Inc PA6T Core (rev 12)
00:10.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:10.1 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:10.2 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:10.3 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:11.0 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:11.1 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:11.2 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:11.3 PCI bridge: PA Semi, Inc PWRficient PCI-Express Port (rev 11)
00:14.0 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
00:14.1 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
00:14.2 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
00:14.3 Ethernet controller: PA Semi, Inc PWRficient Gigabit Ethernet (rev 11)
00:15.0 Ethernet controller: PA Semi, Inc PWRficient 10-Gigabit Ethernet (rev
11)
00:15.1 Ethernet controller: PA Semi, Inc PWRficient 10-Gigabit Ethernet (rev
11)
00:1a.0 DMA controller: PA Semi, Inc PWRficient DMA Controller (rev 12)
00:1b.0 System peripheral: PA Semi, Inc PWRficient SERDES (rev 11)
00:1c.0 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
00:1c.1 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
00:1c.2 SMBus: PA Semi, Inc PWRficient SMBus Controller (rev 01)
00:1d.0 Serial controller: PA Semi, Inc PWRficient 16550 UART (rev 02)
00:1d.1 Serial controller: PA Semi, Inc PWRficient 16550 UART (rev 02)
00:1e.0 ISA bridge: PA Semi, Inc PWRficient LPC/Localbus Interface (rev 12)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts
XT [Radeon HD 6870]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio
[Radeon HD 6800 Series]
05:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600
Non-Raid-5 SATA
05:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0)
05:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1)
05:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2)
05:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3)
05:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4)
05:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB
Controller (EHCI)
05:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
(rev 14)
05:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE
05:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia
(Intel HDA)
05:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC
Bridge
05:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI
Bridge
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
[ 0.000000] Allocated 4096 bytes for 2 pacas at c00000000ffff000
[ 0.000000] Page sizes from device-tree:
[ 0.000000] base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000,
tlbiel=1, penc=0
[ 0.000000] base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000,
tlbiel=1, penc=3
[ 0.000000] base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000,
tlbiel=0, penc=31
[ 0.000000] base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001,
tlbiel=0, penc=0
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
[ 0.000000] Using 1TB segments
[ 0.000000] Initializing hash mmu with SLB
[ 0.000000] Linux version 4.9.52_A-EON_AmigaOne_X1000_Nemo
(christian@AmigaoneX1000) (gcc version 6.3.0 20170618 (Debian 6.3.0-19) ) #1
SMP Thu Oct 5 10:34:46 CEST 2017
[ 0.000000] IOBMAP L2 allocated at: c00000007fe00000
[ 0.000000] Using PA Semi PWRficient machine description
[ 0.000000] Found legacy serial port 0 for /pxp@0,e0000000/serial@1d
[ 0.000000] port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
[ 0.000000] Found legacy serial port 1 for /pxp@0,e0000000/serial@1d,1
[ 0.000000] port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x200000000
[ 0.000000] dcache_bsize = 0x40
[ 0.000000] icache_bsize = 0x40
[ 0.000000] cpu_features = 0x0800020018500048
[ 0.000000] possible = 0x7f7fffff18500649
[ 0.000000] always = 0x0000000018100040
[ 0.000000] cpu_user_features = 0xdc000802 0x00000000
[ 0.000000] mmu_features = 0x6e000001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] htab_address = 0xc000000278000000
[ 0.000000] htab_hash_mask = 0xfffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Found PA-PXP PCI host bridge.
[ 0.000000] PCI host bridge /pxp@0,e0000000 (primary) ranges:
[ 0.000000] IO 0x00000000fc800000..0x00000000fcffffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x00000000e00fffff ->
0x0000000080000000
[ 0.000000] MEM 0x00000000fd800000..0x00000000fd800fff ->
0x00000000fd800000
[ 0.000000] MEM 0x0000080000000000..0x00000bffffffffff ->
0x0000080000000000
[ 0.000000] no ISA IO ranges or unexpected isa range, mapping 64k
[ 0.000000] ISA bridge (early) is /pxp@0,e0000000/io-bridge@0
[ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] On node 0 totalpages: 2097152
[ 0.000000] free_area_init_node: node 0, pgdat c0000000015ddf00,
node_mem_map c00000026f3dc000
[ 0.000000] DMA zone: 35840 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 2097152 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 23 pages/cpu @c00000026f200000 s55320 r0 d38888
u524288
[ 0.000000] pcpu-alloc: s55320 r0 d38888 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2061312
[ 0.000000] Kernel command line: root=/dev/sda4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 8073736K/8388608K available (14032K kernel code, 2084K
rwdata, 6792K rodata, 872K init, 1818K bss, 314872K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] OpenPIC addr: fc000000
[ 0.000000] mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max
2 CPUs
[ 0.000000] mpic: ISU size: 1024, shift: 10, mask: 3ff
[ 0.000000] mpic: Initializing for 1024 sources
[ 0.000000] Init i8259
[ 0.000000] i8259 legacy interrupt controller initialized
[ 0.000000] time_init: decrementer frequency = 66.666666 MHz
[ 0.000000] time_init: processor frequency = 1800.000000 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff max_cycles:
0xf6018975a, max_idle_ns: 440795204712 ns
[ 0.000008] clocksource: timebase mult[f000003] shift[24] registered
[ 0.000013] clockevent: decrementer mult[1111110e] shift[32] cpu[0]
[ 0.000263] Console: colour dummy device 80x25
[ 0.000764] console [tty0] enabled
[ 0.000783] pid_max: default: 32768 minimum: 301
[ 0.000865] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000883] Mountpoint-cache hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.001373] ftrace: allocating 33512 entries in 198 pages
[ 0.030635] mpic: requesting IPIs...
[ 0.031536] Brought up 2 CPUs
[ 0.031992] devtmpfs: initialized
[ 0.034241] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.034270] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.034355] xor: measuring software checksum speed
[ 0.043573] 8regs : 3160.000 MB/sec
[ 0.053596] 8regs_prefetch: 2932.000 MB/sec
[ 0.063618] 32regs : 3512.000 MB/sec
[ 0.073642] 32regs_prefetch: 3092.000 MB/sec
[ 0.083665] altivec : 5816.000 MB/sec
[ 0.083678] xor: using function: altivec (5816.000 MB/sec)
[ 0.083800] NET: Registered protocol family 16
[ 0.085136] PCI: Probing PCI hardware
[ 0.085390] PCI host bridge to bus 0000:00
[ 0.085411] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus
address [0x0000-0x7fffff])
[ 0.085434] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe00fffff]
[ 0.085448] pci_bus 0000:00: root bus resource [mem 0xfd800000-0xfd800fff]
[ 0.085462] pci_bus 0000:00: root bus resource [mem
0x80000000000-0xbffffffffff]
[ 0.085477] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.085492] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.085495] pci_bus 0000:00: scanning bus
[ 0.085519] NEMO SB600 IOB base e0000000
[ 0.085551] pci 0000:00:00.0: [1959:a001] type 00 class 0x060000
[ 0.085564] pci 0000:00:00.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.085572] pci 0000:00:00.0: calling .quirk_mmio_always_on+0x0/0x40
[ 0.085592] pci 0000:00:00.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.085659] ISA bridge PCI attached: 0000:00:00.0
[ 0.085730] pci 0000:00:01.0: [1959:a009] type 00 class 0x058000
[ 0.085739] pci 0000:00:01.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.085763] pci 0000:00:01.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.085884] pci 0000:00:03.0: [1959:a00c] type 00 class 0x080080
[ 0.085892] pci 0000:00:03.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.085915] pci 0000:00:03.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086029] pci 0000:00:04.0: [1959:a00a] type 00 class 0x050000
[ 0.086038] pci 0000:00:04.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086061] pci 0000:00:04.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086183] pci 0000:00:05.0: [1959:a00a] type 00 class 0x050000
[ 0.086192] pci 0000:00:05.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086216] pci 0000:00:05.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086339] pci 0000:00:08.0: [1959:a000] type 00 class 0x0b2000
[ 0.086347] pci 0000:00:08.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086370] pci 0000:00:08.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086483] pci 0000:00:09.0: [1959:a000] type 00 class 0x0b2000
[ 0.086490] pci 0000:00:09.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086513] pci 0000:00:09.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086634] pci 0000:00:10.0: [1959:a002] type 01 class 0x060400
[ 0.086643] pci 0000:00:10.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086662] pci 0000:00:10.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086702] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.086706] pci 0000:00:10.0: PME# disabled
[ 0.086825] pci 0000:00:10.1: [1959:a002] type 01 class 0x060400
[ 0.086834] pci 0000:00:10.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.086854] pci 0000:00:10.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.086881] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.086884] pci 0000:00:10.1: PME# disabled
[ 0.086995] pci 0000:00:10.2: [1959:a002] type 01 class 0x060400
[ 0.087004] pci 0000:00:10.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087022] pci 0000:00:10.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087050] pci 0000:00:10.2: PME# supported from D0 D3hot D3cold
[ 0.087053] pci 0000:00:10.2: PME# disabled
[ 0.087163] pci 0000:00:10.3: [1959:a002] type 01 class 0x060400
[ 0.087171] pci 0000:00:10.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087190] pci 0000:00:10.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087217] pci 0000:00:10.3: PME# supported from D0 D3hot D3cold
[ 0.087220] pci 0000:00:10.3: PME# disabled
[ 0.087332] pci 0000:00:11.0: [1959:a002] type 01 class 0x060400
[ 0.087341] pci 0000:00:11.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087359] pci 0000:00:11.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087386] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 0.087390] pci 0000:00:11.0: PME# disabled
[ 0.087498] pci 0000:00:11.1: [1959:a002] type 01 class 0x060400
[ 0.087507] pci 0000:00:11.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087526] pci 0000:00:11.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087552] pci 0000:00:11.1: PME# supported from D0 D3hot D3cold
[ 0.087556] pci 0000:00:11.1: PME# disabled
[ 0.087667] pci 0000:00:11.2: [1959:a002] type 01 class 0x060400
[ 0.087676] pci 0000:00:11.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087703] pci 0000:00:11.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087730] pci 0000:00:11.2: PME# supported from D0 D3hot D3cold
[ 0.087734] pci 0000:00:11.2: PME# disabled
[ 0.087844] pci 0000:00:11.3: [1959:a002] type 01 class 0x060400
[ 0.087853] pci 0000:00:11.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.087871] pci 0000:00:11.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.087898] pci 0000:00:11.3: PME# supported from D0 D3hot D3cold
[ 0.087902] pci 0000:00:11.3: PME# disabled
[ 0.088020] pci 0000:00:14.0: [1959:a005] type 00 class 0x020000
[ 0.088028] pci 0000:00:14.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088052] pci 0000:00:14.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088163] pci 0000:00:14.1: [1959:a005] type 00 class 0x020000
[ 0.088171] pci 0000:00:14.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088195] pci 0000:00:14.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088305] pci 0000:00:14.2: [1959:a005] type 00 class 0x020000
[ 0.088313] pci 0000:00:14.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088337] pci 0000:00:14.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088439] pci 0000:00:14.3: [1959:a005] type 00 class 0x020000
[ 0.088447] pci 0000:00:14.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088470] pci 0000:00:14.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088592] pci 0000:00:15.0: [1959:a006] type 00 class 0x020000
[ 0.088599] pci 0000:00:15.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088623] pci 0000:00:15.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088751] pci 0000:00:15.1: [1959:a006] type 00 class 0x020000
[ 0.088758] pci 0000:00:15.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088783] pci 0000:00:15.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.088896] pci 0000:00:1a.0: [1959:a007] type 00 class 0x0801ff
[ 0.088905] pci 0000:00:1a.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.088926] pci 0000:00:1a.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089048] pci 0000:00:1b.0: [1959:a00b] type 00 class 0x088000
[ 0.089057] pci 0000:00:1b.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089079] pci 0000:00:1b.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089201] pci 0000:00:1c.0: [1959:a003] type 00 class 0x0c0500
[ 0.089208] pci 0000:00:1c.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089218] pci 0000:00:1c.0: reg 0x10: [io 0x800200-0x80023f]
[ 0.089240] pci 0000:00:1c.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089349] pci 0000:00:1c.1: [1959:a003] type 00 class 0x0c0500
[ 0.089357] pci 0000:00:1c.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089366] pci 0000:00:1c.1: reg 0x10: [io 0x800240-0x80027f]
[ 0.089388] pci 0000:00:1c.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089496] pci 0000:00:1c.2: [1959:a003] type 00 class 0x0c0500
[ 0.089503] pci 0000:00:1c.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089512] pci 0000:00:1c.2: reg 0x10: [io 0x800280-0x8002bf]
[ 0.089534] pci 0000:00:1c.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089646] pci 0000:00:1d.0: [1959:a004] type 00 class 0x070003
[ 0.089654] pci 0000:00:1d.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089663] pci 0000:00:1d.0: reg 0x10: [io 0x8003f8-0x8003ff]
[ 0.089684] pci 0000:00:1d.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089802] pci 0000:00:1d.1: [1959:a004] type 00 class 0x070003
[ 0.089810] pci 0000:00:1d.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089818] pci 0000:00:1d.1: reg 0x10: [io 0x8002f8-0x8002ff]
[ 0.089840] pci 0000:00:1d.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.089963] pci 0000:00:1e.0: [1959:a008] type 00 class 0x0601ff
[ 0.089971] pci 0000:00:1e.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.089980] pci 0000:00:1e.0: reg 0x10: [io 0x800400-0x8004ff]
[ 0.089986] pci 0000:00:1e.0: reg 0x14: [io 0x800500-0x8005ff]
[ 0.090005] pci 0000:00:1e.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.090103] pci_bus 0000:00: fixups for bus
[ 0.132964] IOMMU table initialized, virtual merging enabled
[ 0.133369] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.133491] pci_bus 0000:01: scanning bus
[ 0.133513] pci 0000:01:00.0: [1002:6738] type 00 class 0x030000
[ 0.133525] pci 0000:01:00.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.133541] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit
pref]
[ 0.133552] pci 0000:01:00.0: reg 0x18: [mem 0xa0020000-0xa003ffff 64bit]
[ 0.133560] pci 0000:01:00.0: reg 0x20: [io 0x12000-0x120ff]
[ 0.133572] pci 0000:01:00.0: reg 0x30: [mem 0xa0000000-0xa001ffff pref]
[ 0.133583] pci 0000:01:00.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.133590] pci 0000:01:00.0: calling .quirk_no_pm_reset+0x0/0x50
[ 0.133628] pci 0000:01:00.0: supports D1 D2
[ 0.133752] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[ 0.133762] pci 0000:01:00.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.133776] pci 0000:01:00.1: reg 0x10: [mem 0xa0040000-0xa0043fff 64bit]
[ 0.133806] pci 0000:01:00.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.133843] pci 0000:01:00.1: supports D1 D2
[ 0.136912] pci_bus 0000:01: fixups for bus
[ 0.136917] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.136936] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.136941] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.137003] pci_bus 0000:01: bus scan returning with max=01
[ 0.137010] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 0
[ 0.137090] pci_bus 0000:02: scanning bus
[ 0.137114] pci_bus 0000:02: fixups for bus
[ 0.137118] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.137139] pci_bus 0000:02: bus scan returning with max=02
[ 0.137144] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 0
[ 0.137220] pci_bus 0000:03: scanning bus
[ 0.137244] pci_bus 0000:03: fixups for bus
[ 0.137248] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.137267] pci_bus 0000:03: bus scan returning with max=03
[ 0.137273] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 0
[ 0.137349] pci_bus 0000:04: scanning bus
[ 0.137373] pci_bus 0000:04: fixups for bus
[ 0.137377] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.137396] pci_bus 0000:04: bus scan returning with max=04
[ 0.137402] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 0
[ 0.137484] pci_bus 0000:05: scanning bus
[ 0.137529] pci 0000:05:12.0: [1002:4380] type 00 class 0x01018f
[ 0.137541] pci 0000:05:12.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.137547] pci 0000:05:12.0: calling .quirk_no_ata_d3+0x0/0x40
[ 0.137560] pci 0000:05:12.0: reg 0x10: [io 0x11040-0x11047]
[ 0.137570] pci 0000:05:12.0: reg 0x14: [io 0x1105c-0x1105f]
[ 0.137580] pci 0000:05:12.0: reg 0x18: [io 0x11048-0x1104f]
[ 0.137589] pci 0000:05:12.0: reg 0x1c: [io 0x11058-0x1105b]
[ 0.137599] pci 0000:05:12.0: reg 0x20: [io 0x11010-0x1101f]
[ 0.137609] pci 0000:05:12.0: reg 0x24: [mem 0xa0209400-0xa02097ff]
[ 0.137626] pci 0000:05:12.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.137633] pci 0000:05:12.0: calling .quirk_amd_ide_mode+0x0/0x120
[ 0.137642] pci 0000:05:12.0: set SATA to AHCI mode
[ 0.137792] pci 0000:05:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.137801] pci 0000:05:13.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.137814] pci 0000:05:13.0: reg 0x10: [mem 0xa0208000-0xa0208fff]
[ 0.137864] pci 0000:05:13.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.137990] pci 0000:05:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.137999] pci 0000:05:13.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.138012] pci 0000:05:13.1: reg 0x10: [mem 0xa0207000-0xa0207fff]
[ 0.138062] pci 0000:05:13.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.138180] pci 0000:05:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.138189] pci 0000:05:13.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.138202] pci 0000:05:13.2: reg 0x10: [mem 0xa0206000-0xa0206fff]
[ 0.138252] pci 0000:05:13.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.138366] pci 0000:05:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.138374] pci 0000:05:13.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.138388] pci 0000:05:13.3: reg 0x10: [mem 0xa0204000-0xa0204fff]
[ 0.138437] pci 0000:05:13.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.138551] pci 0000:05:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.138560] pci 0000:05:13.4: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.138573] pci 0000:05:13.4: reg 0x10: [mem 0xa0205000-0xa0205fff]
[ 0.138623] pci 0000:05:13.4: calling .pcibios_fixup_resources+0x0/0x160
[ 0.138744] pci 0000:05:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.138755] pci 0000:05:13.5: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.138769] pci 0000:05:13.5: reg 0x10: [mem 0xa0209800-0xa02098ff]
[ 0.138819] pci 0000:05:13.5: calling .pcibios_fixup_resources+0x0/0x160
[ 0.138852] pci 0000:05:13.5: supports D1 D2
[ 0.138856] pci 0000:05:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.138860] pci 0000:05:13.5: PME# disabled
[ 0.138985] pci 0000:05:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.138993] pci 0000:05:14.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.139006] pci 0000:05:14.0: reg 0x10: [io 0x11020-0x1102f]
[ 0.139015] pci 0000:05:14.0: reg 0x14: [mem 0xa0209000-0xa02093ff]
[ 0.139056] pci 0000:05:14.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.139173] pci 0000:05:14.1: [1002:438c] type 00 class 0x010183
[ 0.139181] pci 0000:05:14.1: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.139187] pci 0000:05:14.1: calling .quirk_no_ata_d3+0x0/0x40
[ 0.139200] pci 0000:05:14.1: reg 0x10: [io 0x11030-0x11037]
[ 0.139209] pci 0000:05:14.1: reg 0x14: [io 0x11054-0x11057]
[ 0.139219] pci 0000:05:14.1: reg 0x18: [io 0x11038-0x1103f]
[ 0.139228] pci 0000:05:14.1: reg 0x1c: [io 0x11050-0x11053]
[ 0.139237] pci 0000:05:14.1: reg 0x20: [io 0x11000-0x1100f]
[ 0.139257] pci 0000:05:14.1: legacy IDE quirk: reg 0x18: [io
0x10170-0x10177]
[ 0.139274] pci 0000:05:14.1: legacy IDE quirk: reg 0x1c: [io 0x10376]
[ 0.139291] pci 0000:05:14.1: calling .pcibios_fixup_resources+0x0/0x160
[ 0.139412] pci 0000:05:14.2: [1002:4383] type 00 class 0x040300
[ 0.139422] pci 0000:05:14.2: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.139440] pci 0000:05:14.2: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
[ 0.139483] pci 0000:05:14.2: calling .pcibios_fixup_resources+0x0/0x160
[ 0.139511] pci 0000:05:14.2: PME# supported from D0 D3hot D3cold
[ 0.139516] pci 0000:05:14.2: PME# disabled
[ 0.139629] pci 0000:05:14.3: [1002:438d] type 00 class 0x060100
[ 0.139637] pci 0000:05:14.3: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.139693] pci 0000:05:14.3: calling .pcibios_fixup_resources+0x0/0x160
[ 0.139811] pci 0000:05:14.4: [1002:4384] type 01 class 0x060400
[ 0.139819] pci 0000:05:14.4: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.139849] pci 0000:05:14.4: calling .pcibios_fixup_resources+0x0/0x160
[ 0.139982] pci_bus 0000:05: fixups for bus
[ 0.139986] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.140004] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.140009] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.140062] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 0
[ 0.140140] pci_bus 0000:06: scanning bus
[ 0.140170] pci 0000:06:05.0: [10ec:8139] type 00 class 0x020000
[ 0.140182] pci 0000:06:05.0: calling .pci_dev_pdn_setup+0x0/0x60
[ 0.140198] pci 0000:06:05.0: reg 0x10: [io 0x13000-0x130ff]
[ 0.140211] pci 0000:06:05.0: reg 0x14: [mem 0xa0310000-0xa03100ff]
[ 0.140260] pci 0000:06:05.0: reg 0x30: [mem 0xa0300000-0xa030ffff pref]
[ 0.140269] pci 0000:06:05.0: calling .pcibios_fixup_resources+0x0/0x160
[ 0.140305] pci 0000:06:05.0: supports D1 D2
[ 0.140308] pci 0000:06:05.0: PME# supported from D1 D2 D3hot
[ 0.140313] pci 0000:06:05.0: PME# disabled
[ 0.140455] pci_bus 0000:06: fixups for bus
[ 0.140459] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.140477] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.140483] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.140495] pci_bus 0000:06: bus scan returning with max=06
[ 0.140502] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 1
[ 0.140507] pci_bus 0000:05: bus scan returning with max=06
[ 0.140512] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 0
[ 0.140594] pci_bus 0000:07: scanning bus
[ 0.140618] pci_bus 0000:07: fixups for bus
[ 0.140622] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.140642] pci_bus 0000:07: bus scan returning with max=07
[ 0.140647] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 0
[ 0.140730] pci_bus 0000:08: scanning bus
[ 0.140754] pci_bus 0000:08: fixups for bus
[ 0.140758] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.140778] pci_bus 0000:08: bus scan returning with max=08
[ 0.140784] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 0
[ 0.140864] pci_bus 0000:09: scanning bus
[ 0.140888] pci_bus 0000:09: fixups for bus
[ 0.140892] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.140921] pci_bus 0000:09: bus scan returning with max=09
[ 0.140927] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.140933] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 1
[ 0.140939] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 1
[ 0.140944] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 1
[ 0.140950] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 1
[ 0.140956] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 1
[ 0.140961] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 1
[ 0.140967] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 1
[ 0.140972] pci_bus 0000:00: bus scan returning with max=09
[ 0.140977] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.141156] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.141169] pci 0000:00:10.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 01] add_size 200000 add_align 100000
[ 0.141194] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 05-06] add_size 200000 add_align 100000
[ 0.141202] pci 0000:00:11.1: bridge window [io 0x1000-0x0fff] to [bus 07]
add_size 1000
[ 0.141207] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 07] add_size 200000 add_align 100000
[ 0.141212] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff] to
[bus 07] add_size 200000 add_align 100000
[ 0.141219] pci 0000:00:11.2: bridge window [io 0x1000-0x0fff] to [bus 08]
add_size 1000
[ 0.141224] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 08] add_size 200000 add_align 100000
[ 0.141229] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff] to
[bus 08] add_size 200000 add_align 100000
[ 0.141237] pci 0000:00:11.3: bridge window [io 0x1000-0x0fff] to [bus 09]
add_size 1000
[ 0.141244] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 09] add_size 200000 add_align 100000
[ 0.141249] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff] to
[bus 09] add_size 200000 add_align 100000
[ 0.141267] pci 0000:00:10.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141271] pci 0000:00:10.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141276] pci 0000:00:11.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141281] pci 0000:00:11.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141285] pci 0000:00:11.1: res[8]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141290] pci 0000:00:11.1: res[8]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141294] pci 0000:00:11.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141299] pci 0000:00:11.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141303] pci 0000:00:11.2: res[8]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141307] pci 0000:00:11.2: res[8]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141312] pci 0000:00:11.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141316] pci 0000:00:11.2: res[9]=[mem 0x00100000-0x002fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141321] pci 0000:00:11.3: res[8]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141325] pci 0000:00:11.3: res[8]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141330] pci 0000:00:11.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141334] pci 0000:00:11.3: res[9]=[mem 0x00100000-0x002fffff 64bit pref]
res_to_dev_res add_size 200000 min_align 100000
[ 0.141338] pci 0000:00:11.1: res[7]=[io 0x1000-0x0fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141343] pci 0000:00:11.1: res[7]=[io 0x1000-0x1fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141347] pci 0000:00:11.2: res[7]=[io 0x1000-0x0fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141351] pci 0000:00:11.2: res[7]=[io 0x1000-0x1fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141356] pci 0000:00:11.3: res[7]=[io 0x1000-0x0fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141360] pci 0000:00:11.3: res[7]=[io 0x1000-0x1fff] res_to_dev_res
add_size 1000 min_align 1000
[ 0.141369] pci 0000:00:10.0: BAR 9: assigned [mem
0x80000000000-0x800001fffff 64bit pref]
[ 0.141388] pci 0000:00:11.0: BAR 9: assigned [mem
0x80000200000-0x800003fffff 64bit pref]
[ 0.141403] pci 0000:00:11.1: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.141420] pci 0000:00:11.1: BAR 9: assigned [mem
0x80000400000-0x800005fffff 64bit pref]
[ 0.141435] pci 0000:00:11.2: BAR 8: assigned [mem 0x80200000-0x803fffff]
[ 0.141452] pci 0000:00:11.2: BAR 9: assigned [mem
0x80000600000-0x800007fffff 64bit pref]
[ 0.141467] pci 0000:00:11.3: BAR 8: assigned [mem 0x80400000-0x805fffff]
[ 0.141483] pci 0000:00:11.3: BAR 9: assigned [mem
0x80000800000-0x800009fffff 64bit pref]
[ 0.141498] pci 0000:00:11.1: BAR 7: assigned [io 0x14000-0x14fff]
[ 0.141512] pci 0000:00:11.2: BAR 7: assigned [io 0x15000-0x15fff]
[ 0.141526] pci 0000:00:11.3: BAR 7: assigned [io 0x16000-0x16fff]
[ 0.141546] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.141560] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.141574] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.141589] pci 0000:00:10.0: bridge window [mem
0x80000000000-0x800001fffff 64bit pref]
[ 0.141603] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.141618] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.141632] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.141651] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.141665] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.141680] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.141697] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.141710] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.141724] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.141738] pci 0000:00:11.0: bridge window [mem
0x80000200000-0x800003fffff 64bit pref]
[ 0.141752] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.141765] pci 0000:00:11.1: bridge window [io 0x14000-0x14fff]
[ 0.141779] pci 0000:00:11.1: bridge window [mem 0x80000000-0x801fffff]
[ 0.141792] pci 0000:00:11.1: bridge window [mem
0x80000400000-0x800005fffff 64bit pref]
[ 0.141806] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.141820] pci 0000:00:11.2: bridge window [io 0x15000-0x15fff]
[ 0.141833] pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]
[ 0.141847] pci 0000:00:11.2: bridge window [mem
0x80000600000-0x800007fffff 64bit pref]
[ 0.141862] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.141875] pci 0000:00:11.3: bridge window [io 0x16000-0x16fff]
[ 0.141889] pci 0000:00:11.3: bridge window [mem 0x80400000-0x805fffff]
[ 0.141911] pci 0000:00:11.3: bridge window [mem
0x80000800000-0x800009fffff 64bit pref]
[ 0.141931] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
[ 0.141935] pci_bus 0000:00: resource 5 [mem 0x80000000-0xe00fffff]
[ 0.141938] pci_bus 0000:00: resource 6 [mem 0xfd800000-0xfd800fff]
[ 0.141942] pci_bus 0000:00: resource 7 [mem 0x80000000000-0xbffffffffff]
[ 0.141946] pci_bus 0000:01: resource 0 [io 0x12000-0x12fff]
[ 0.141949] pci_bus 0000:01: resource 1 [mem 0x90000000-0xa00fffff]
[ 0.141953] pci_bus 0000:01: resource 2 [mem 0x80000000000-0x800001fffff
64bit pref]
[ 0.141958] pci_bus 0000:05: resource 0 [io 0x10000-0x13fff]
[ 0.141961] pci_bus 0000:05: resource 1 [mem 0xa0100000-0xa03fffff]
[ 0.141965] pci_bus 0000:05: resource 2 [mem 0x80000200000-0x800003fffff
64bit pref]
[ 0.141969] pci_bus 0000:06: resource 0 [io 0x13000-0x13fff]
[ 0.141972] pci_bus 0000:06: resource 1 [mem 0xa0300000-0xa03fffff]
[ 0.141976] pci_bus 0000:07: resource 0 [io 0x14000-0x14fff]
[ 0.141979] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff]
[ 0.141983] pci_bus 0000:07: resource 2 [mem 0x80000400000-0x800005fffff
64bit pref]
[ 0.141987] pci_bus 0000:08: resource 0 [io 0x15000-0x15fff]
[ 0.141990] pci_bus 0000:08: resource 1 [mem 0x80200000-0x803fffff]
[ 0.141994] pci_bus 0000:08: resource 2 [mem 0x80000600000-0x800007fffff
64bit pref]
[ 0.141997] pci_bus 0000:09: resource 0 [io 0x16000-0x16fff]
[ 0.142001] pci_bus 0000:09: resource 1 [mem 0x80400000-0x805fffff]
[ 0.142005] pci_bus 0000:09: resource 2 [mem 0x80000800000-0x800009fffff
64bit pref]
[ 0.142007] PCI: Probing PCI hardware done
[ 0.165208] HugeTLB registered 64 KB page size, pre-allocated 0 pages
[ 0.165226] HugeTLB registered 1 MB page size, pre-allocated 0 pages
[ 0.165238] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 0.182112] raid6: altivecx1 gen() 2515 MB/s
[ 0.199188] raid6: altivecx2 gen() 3109 MB/s
[ 0.216250] raid6: altivecx4 gen() 3574 MB/s
[ 0.233306] raid6: altivecx8 gen() 3625 MB/s
[ 0.250386] raid6: int64x1 gen() 1019 MB/s
[ 0.267470] raid6: int64x1 xor() 488 MB/s
[ 0.284482] raid6: int64x2 gen() 1738 MB/s
[ 0.301531] raid6: int64x2 xor() 941 MB/s
[ 0.318593] raid6: int64x4 gen() 2007 MB/s
[ 0.335657] raid6: int64x4 xor() 1179 MB/s
[ 0.352730] raid6: int64x8 gen() 1503 MB/s
[ 0.369768] raid6: int64x8 xor() 1054 MB/s
[ 0.369780] raid6: using algorithm altivecx8 gen() 3625 MB/s
[ 0.369792] raid6: using intx1 recovery algorithm
[ 0.370088] SCSI subsystem initialized
[ 0.370285] libata version 3.00 loaded.
[ 0.370558] usbcore: registered new interface driver usbfs
[ 0.370627] usbcore: registered new interface driver hub
[ 0.370674] usbcore: registered new device driver usb
[ 0.370919] EDAC MC: Ver: 3.0.0
[ 0.371428] Advanced Linux Sound Architecture Driver Initialized.
[ 0.372252] clocksource: Switched to clocksource timebase
[ 0.393058] NET: Registered protocol family 2
[ 0.393366] TCP established hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.393647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394099] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.394163] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394279] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.394455] NET: Registered protocol family 1
[ 0.394656] RPC: Registered named UNIX socket transport module.
[ 0.394670] RPC: Registered udp transport module.
[ 0.394681] RPC: Registered tcp transport module.
[ 0.394691] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.394798] pci 0000:01:00.0: calling .fixup_vga+0x0/0x50
[ 0.394819] pci 0000:05:13.0: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.446275] pci 0000:05:13.1: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.498271] pci 0000:05:13.2: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.550271] pci 0000:05:13.3: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.602270] pci 0000:05:13.4: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.655272] pci 0000:05:13.5: calling .quirk_usb_early_handoff+0x0/0x9e0
[ 0.655716] PCI: CLS 64 bytes, default 128
[ 0.656836] libphy: pasemi gpio mdio bus: probed
[ 0.665156] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ 0.665599] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.665855] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.665964] fuse init (API version 7.26)
[ 0.668390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.668408] io scheduler noop registered
[ 0.668435] io scheduler bfq registered (default)
[ 0.668446] BFQ I/O-scheduler: v8r7
[ 0.670535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.690963] serial8250.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud =
8333333) is a 16550A
[ 0.711020] serial8250.0: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud =
8333333) is a 16550A
[ 0.731229] 0000:00:1d.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud =
8333333) is a 16550A
[ 0.751325] 0000:00:1d.1: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud =
8333333) is a 16550A
[ 0.751709] Registering PA Semi RNG
[ 0.751761] Linux agpgart interface v0.103
[ 0.751841] [drm] Initialized
[ 0.751898] [drm] radeon kernel modesetting enabled.
[ 0.752384] [drm] initializing kernel modesetting (BARTS 0x1002:0x6738
0x1682:0x3107 0x00).
[ 0.752409] [drm] register mmio base: 0xA0020000
[ 0.752420] [drm] register mmio size: 131072
[ 0.925521] ATOM BIOS: BARTS
[ 0.925697] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 0.925720] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 -
0x000000007FFFFFFF
[ 0.925734] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.925745] [drm] RAM width 256bits DDR
[ 0.925828] [TTM] Zone kernel: Available graphics memory: 4037378 kiB
[ 0.925841] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.925852] [TTM] Initializing pool allocator
[ 0.925902] [drm] radeon: 1024M of VRAM memory ready
[ 0.925914] [drm] radeon: 1024M of GTT memory ready.
[ 0.925944] [drm] Loading BARTS Microcode
[ 0.925965] [drm] Internal thermal controller with fan control
[ 0.931134] [drm] radeon: dpm initialized
[ 0.931201] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.965655] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.965812] radeon 0000:01:00.0: WB enabled
[ 0.965829] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xc00000026dbf6c00
[ 0.965854] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xc00000026dbf6c0c
[ 0.973315] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x0000000000072118 and cpu addr 0xd0000800901b2118
[ 0.973341] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.973352] [drm] Driver supports precise vblank timestamp query.
[ 0.973365] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 0.973416] [drm] radeon: irq initialized.
[ 0.990094] [drm] ring test on 0 succeeded in 3 usecs
[ 0.990122] [drm] ring test on 3 succeeded in 7 usecs
[ 1.165635] [drm] ring test on 5 succeeded in 3 usecs
[ 1.165655] [drm] UVD initialized successfully.
[ 1.166060] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.166127] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.818285] [drm] ib test on ring 5 succeeded
[ 1.819779] [drm] Radeon Display Connectors
[ 1.819794] [drm] Connector 0:
[ 1.819804] [drm] DP-1
[ 1.819813] [drm] HPD4
[ 1.819825] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c
0x643c
[ 1.819836] [drm] Encoders:
[ 1.819846] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.819857] [drm] Connector 1:
[ 1.819867] [drm] DP-2
[ 1.819876] [drm] HPD5
[ 1.819887] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c
0x644c
[ 1.819898] [drm] Encoders:
[ 1.819908] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.819918] [drm] Connector 2:
[ 1.819927] [drm] HDMI-A-1
[ 1.819936] [drm] HPD3
[ 1.819947] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c
0x646c
[ 1.819958] [drm] Encoders:
[ 1.819968] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.819977] [drm] Connector 3:
[ 1.819987] [drm] DVI-D-1
[ 1.819995] [drm] HPD1
[ 1.820006] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c
0x648c
[ 1.820017] [drm] Encoders:
[ 1.820026] [drm] DFP4: INTERNAL_UNIPHY1
[ 1.820037] [drm] Connector 4:
[ 1.820046] [drm] DVI-I-1
[ 1.820055] [drm] HPD6
[ 1.820066] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c
0x647c
[ 1.820077] [drm] Encoders:
[ 1.820087] [drm] DFP5: INTERNAL_UNIPHY
[ 1.820097] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.002775] [drm] fb mappable at 0x90363000
[ 2.002791] [drm] vram apper at 0x90000000
[ 2.002802] [drm] size 7680000
[ 2.002812] [drm] fb depth is 24
[ 2.002821] [drm] pitch is 6400
[ 2.102619] [drm:.btc_dpm_set_power_state] *ERROR*
rv770_restrict_performance_levels_before_switch failed
[ 2.240910] Console: switching to colour frame buffer device 200x75
[ 2.337462] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.341326] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on
minor 0
[ 2.344348] loop: module loaded
[ 2.344668] ahci 0000:05:12.0: version 3.0
[ 2.344708] ahci 0000:05:12.0: controller can't do 64bit DMA, forcing 32bit
[ 2.345244] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 2.345802] ahci 0000:05:12.0: flags: ncq sntf ilck pm led clo pmp pio slum
part ccc
[ 2.347148] scsi host0: ahci
[ 2.347481] scsi host1: ahci
[ 2.347752] scsi host2: ahci
[ 2.348033] scsi host3: ahci
[ 2.348261] ata1: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209500
irq 9
[ 2.348734] ata2: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209580
irq 9
[ 2.349203] ata3: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209600
irq 9
[ 2.349684] ata4: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209680
irq 9
[ 2.350903] scsi host4: pata_atiixp
[ 2.351239] scsi host5: pata_atiixp
[ 2.351499] ata5: PATA max UDMA/100 cmd 0x11030 ctl 0x11054 bmdma 0x11000
irq 9
[ 2.351979] ata6: DUMMY
[ 2.352189] pata_of_platform f0000000.cf: pio-mode unspecified, assuming PIO0
[ 2.352920] scsi host6: pata_of_platform
[ 2.353202] ata7: PATA max PIO0 no IRQ, using PIO polling mmio cmd
0xf0000800 ctl 0xf000080e
[ 2.354181] libphy: Fixed MDIO Bus: probed
[ 2.355017] PA Semi PWRficient DMA library initialized (20 tx, 64 rx
channels)
[ 2.372505] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 2.372914] pasemi_mac 0000:00:15.0: no mac address in device tree, not
configuring
[ 2.384322] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.384768] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip, use 8139too
[ 2.385500] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.386774] 8139too 0000:06:05.0 eth1: RealTek RTL8139 at
0xd000080000013000, 00:e0:e8:16:5f:64, IRQ 4
[ 2.387494] PPP generic driver version 2.4.2
[ 2.387804] PPP BSD Compression module registered
[ 2.388071] PPP Deflate Compression module registered
[ 2.388371] NET: Registered protocol family 24
[ 2.388622] orinoco 0.15 (David Gibson <her...@gibson.dropbear.id.au>, Pavel
Roskin <pro...@gnu.org>, et al)
[ 2.388625] orinoco_plx 0.15 (Pavel Roskin <pro...@gnu.org>, David Gibson
<her...@gibson.dropbear.id.au>, Daniel Barlow <d...@telent.net>)
[ 2.388673] orinoco_pci 0.15 (Pavel Roskin <pro...@gnu.org>, David Gibson
<her...@gibson.dropbear.id.au> & Jean Tourrilhes <j...@hpl.hp.com>)
[ 2.388798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.389255] ehci-pci: EHCI PCI platform driver
[ 2.389556] ehci-pci 0000:05:13.5: enabling bus mastering
[ 2.389591] ehci-pci 0000:05:13.5: EHCI Host Controller
[ 2.389979] ehci-pci 0000:05:13.5: new USB bus registered, assigned bus
number 1
[ 2.390480] ehci-pci 0000:05:13.5: applying AMD SB600/SB700 USB freeze
workaround
[ 2.390984] ehci-pci 0000:05:13.5: debug port 1
[ 2.391282] ehci-pci 0000:05:13.5: irq 12, io mem 0xa0209800
[ 2.398264] ehci-pci 0000:05:13.5: USB 2.0 started, EHCI 1.00
[ 2.398735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.399170] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.399642] usb usb1: Product: EHCI Host Controller
[ 2.418973] usb usb1: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ehci_hcd
[ 2.438858] usb usb1: SerialNumber: 0000:05:13.5
[ 2.459020] hub 1-0:1.0: USB hub found
[ 2.478791] hub 1-0:1.0: 10 ports detected
[ 2.498662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.518657] ohci-pci: OHCI PCI platform driver
[ 2.521708] ata7.00: CFA: SanDisk SDCFB-256, HDX 2.33, max PIO4
[ 2.521712] ata7.00: 501760 sectors, multi 0: LBA
[ 2.521720] ata7.00: configured for PIO
[ 2.599413] ohci-pci 0000:05:13.0: enabling bus mastering
[ 2.599417] ohci-pci 0000:05:13.0: OHCI PCI host controller
[ 2.619861] ohci-pci 0000:05:13.0: new USB bus registered, assigned bus
number 2
[ 2.640420] ohci-pci 0000:05:13.0: irq 9, io mem 0xa0208000
[ 2.665512] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.687404] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.708468] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.727422] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.731593] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.731597] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.731600] usb usb2: Product: OHCI PCI host controller
[ 2.731603] usb usb2: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ohci_hcd
[ 2.731605] usb usb2: SerialNumber: 0000:05:13.0
[ 2.731802] hub 2-0:1.0: USB hub found
[ 2.731822] hub 2-0:1.0: 2 ports detected
[ 2.731989] ohci-pci 0000:05:13.1: enabling bus mastering
[ 2.731992] ohci-pci 0000:05:13.1: OHCI PCI host controller
[ 2.732062] ohci-pci 0000:05:13.1: new USB bus registered, assigned bus
number 3
[ 2.732100] ohci-pci 0000:05:13.1: irq 10, io mem 0xa0207000
[ 2.787338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.787342] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.787345] usb usb3: Product: OHCI PCI host controller
[ 2.787348] usb usb3: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ohci_hcd
[ 2.787350] usb usb3: SerialNumber: 0000:05:13.1
[ 2.787540] hub 3-0:1.0: USB hub found
[ 2.787557] hub 3-0:1.0: 2 ports detected
[ 2.787721] ohci-pci 0000:05:13.2: enabling bus mastering
[ 2.787724] ohci-pci 0000:05:13.2: OHCI PCI host controller
[ 2.787795] ohci-pci 0000:05:13.2: new USB bus registered, assigned bus
number 4
[ 2.787834] ohci-pci 0000:05:13.2: irq 11, io mem 0xa0206000
[ 2.843337] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.843340] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.843343] usb usb4: Product: OHCI PCI host controller
[ 2.843346] usb usb4: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ohci_hcd
[ 2.843349] usb usb4: SerialNumber: 0000:05:13.2
[ 2.843596] hub 4-0:1.0: USB hub found
[ 2.843616] hub 4-0:1.0: 2 ports detected
[ 2.843783] ohci-pci 0000:05:13.3: enabling bus mastering
[ 2.843786] ohci-pci 0000:05:13.3: OHCI PCI host controller
[ 2.843879] ohci-pci 0000:05:13.3: new USB bus registered, assigned bus
number 5
[ 2.843918] ohci-pci 0000:05:13.3: irq 10, io mem 0xa0204000
[ 2.899327] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.899330] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.899333] usb usb5: Product: OHCI PCI host controller
[ 2.899336] usb usb5: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ohci_hcd
[ 2.899339] usb usb5: SerialNumber: 0000:05:13.3
[ 2.899580] hub 5-0:1.0: USB hub found
[ 2.899598] hub 5-0:1.0: 2 ports detected
[ 2.899763] ohci-pci 0000:05:13.4: enabling bus mastering
[ 2.899766] ohci-pci 0000:05:13.4: OHCI PCI host controller
[ 2.899859] ohci-pci 0000:05:13.4: new USB bus registered, assigned bus
number 6
[ 2.899896] ohci-pci 0000:05:13.4: irq 11, io mem 0xa0205000
[ 2.964263] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.964266] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.964269] usb usb6: Product: OHCI PCI host controller
[ 2.964272] usb usb6: Manufacturer: Linux 4.9.52_A-EON_AmigaOne_X1000_Nemo
ohci_hcd
[ 2.964275] usb usb6: SerialNumber: 0000:05:13.4
[ 2.964518] hub 6-0:1.0: USB hub found
[ 2.964538] hub 6-0:1.0: 2 ports detected
[ 2.964862] usbcore: registered new interface driver usblp
[ 2.964974] usbcore: registered new interface driver usb-storage
[ 2.965058] usbcore: registered new interface driver usbserial
[ 2.965106] usbcore: registered new interface driver usbserial_generic
[ 2.965149] usbserial: USB Serial support registered for generic
[ 2.965202] usbcore: registered new interface driver ftdi_sio
[ 2.965244] usbserial: USB Serial support registered for FTDI USB Serial
Device
[ 2.965431] usbcore: registered new interface driver option
[ 2.965473] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.965930] mousedev: PS/2 mouse device common for all mice
[ 2.966035] usbcore: registered new interface driver synaptics_usb
[ 2.966521] usbcore: registered new interface driver iforce
[ 2.967092] usbcore: registered new interface driver xpad
[ 2.967147] usbcore: registered new interface driver usb_acecad
[ 2.967202] usbcore: registered new interface driver aiptek
[ 2.967275] usbcore: registered new interface driver gtco
[ 2.967332] usbcore: registered new interface driver hanwang
[ 2.967384] usbcore: registered new interface driver kbtab
[ 2.967627] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.967652] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 2.967669] i2c /dev entries driver
[ 2.986257] i2c i2c-10: Detected TI TMP423 chip at 0x4c
[ 3.050912] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-de...@redhat.com
[ 3.051519] EDAC MC0: Giving out device to module pasemi_edac controller
pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
[ 3.052099] EDAC MC1: Giving out device to module pasemi_edac controller
pasemi,pwrficient-mc: DEV 0000:00:05.0 (POLLED)
[ 3.052615] usbcore: registered new interface driver usbhid
[ 3.052616] usbhid: USB HID core driver
[ 3.052856] no UART detected at 0x1
[ 3.053674] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[ 3.053784] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[ 3.054121] usbcore: registered new interface driver snd-usb-audio
[ 3.054185] usbcore: registered new interface driver snd-ua101
[ 3.054275] usbcore: registered new interface driver snd-usb-usx2y
[ 3.054343] usbcore: registered new interface driver snd-usb-caiaq
[ 3.054406] usbcore: registered new interface driver snd-usb-6fire
[ 3.054471] usbcore: registered new interface driver snd-usb-hiface
[ 3.054527] usbcore: registered new interface driver snd-bcd2000
[ 3.054582] usbcore: registered new interface driver snd_usb_pod
[ 3.054637] usbcore: registered new interface driver snd_usb_podhd
[ 3.054692] usbcore: registered new interface driver snd_usb_toneport
[ 3.054747] usbcore: registered new interface driver snd_usb_variax
[ 3.054749] oprofile: using ppc64/pa6t performance monitoring.
[ 3.054851] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.055191] Initializing XFRM netlink socket
[ 3.073262] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 3.176301] NET: Registered protocol family 10
[ 3.209294] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.209665] NET: Registered protocol family 17
[ 3.209675] NET: Registered protocol family 15
[ 3.209710] No cpufreq driver, powersavings modes disabled
[ 3.209712] Using PA6T idle loop (spin)
[ 3.323429] random: fast init done
[ 3.323499] Btrfs loaded, crc32c=crc32c-generic
[ 3.408542] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input0
[ 3.429151] rtc_cmos rtc_cmos: setting system clock to 2017-10-06 16:15:31
UTC (1507306531)
[ 3.429383] ALSA device list:
[ 3.429385] #0: HDA ATI HDMI at 0xa0040000 irq 49
[ 3.505375] usb 2-1: New USB device found, idVendor=04d9, idProduct=1503
[ 3.505379] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.505381] usb 2-1: Product: USB Keyboard
[ 3.505384] usb 2-1: Manufacturer:
[ 3.611340] input: USB Keyboard as
/devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1:1.0/0003:04D9:1503.0001/input/input1
[ 3.663538] hid-generic 0003:04D9:1503.0001: input: USB HID v1.10 Keyboard [
USB Keyboard] on usb-0000:05:13.0-1/input0
[ 3.806812] input: USB Keyboard as
/devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1:1.1/0003:04D9:1503.0002/input/input2
[ 3.858324] hid-generic 0003:04D9:1503.0002: input: USB HID v1.10 Device [
USB Keyboard] on usb-0000:05:13.0-1/input1
[ 4.371423] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700:
line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[ 4.371427] snd_hda_codec_idt hdaudioC1D3: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 4.371431] snd_hda_codec_idt hdaudioC1D3: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 4.371434] snd_hda_codec_idt hdaudioC1D3: mono: mono_out=0x0
[ 4.371437] snd_hda_codec_idt hdaudioC1D3: dig-out=0x21/0x0
[ 4.371439] snd_hda_codec_idt hdaudioC1D3: inputs:
[ 4.371443] snd_hda_codec_idt hdaudioC1D3: Front Mic=0xb
[ 4.371447] snd_hda_codec_idt hdaudioC1D3: Rear Mic=0xe
[ 4.371450] snd_hda_codec_idt hdaudioC1D3: Line=0xc
[ 4.371453] snd_hda_codec_idt hdaudioC1D3: CD=0x12
[ 5.026263] usb 1-9: new high-speed USB device number 5 using ehci-pci
[ 5.098992] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 5.118050] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.137691] ata1.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
[ 5.156056] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.175048] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.194428] ata4.00: ATA-8: ESA3SF1240GB, 4.C.V, max UDMA/133
[ 5.214680] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.235201] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.245261] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 5.245283] usb 5-2: new low-speed USB device number 2 using ohci-pci
[ 5.297854] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.318126] ata3.00: configured for UDMA/100
[ 5.337135] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.358687] ata1.00: configured for UDMA/133
[ 5.380308] usb 1-9: New USB device found, idVendor=057c, idProduct=8501
[ 5.400842] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.421362] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.421365] usb 1-9: Product: FRITZ!WLAN USB Stick N v2
[ 5.421368] usb 1-9: Manufacturer: AVM Berlin
[ 5.421370] usb 1-9: SerialNumber: 246511446201
[ 5.421590] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4B
PQ: 0 ANSI: 5
[ 5.526263] usb 1-10: new high-speed USB device number 6 using ehci-pci
[ 5.548857] ata4.00: configured for UDMA/133
[ 5.571326] usb 5-2: New USB device found, idVendor=040b, idProduct=6533
[ 5.591827] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.612269] usb 5-2: Product: SPEED-LINK Competition Pro
[ 5.632850] usb 5-2: Manufacturer: A
[ 5.653489] usb 5-2: SerialNumber: 0001
[ 5.677669] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00
TB/1.82 TiB)
[ 5.699084] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.699135] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.742432] sd 0:0:0:0: [sda] Write Protect is off
[ 5.764149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.764287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.786794] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01
PQ: 0 ANSI: 5
[ 5.811187] input: A SPEED-LINK Competition Pro as
/devices/pci0000:00/0000:00:11.0/0000:05:13.3/usb5/5-2/5-2:1.0/0003:040B:6533.0003/input/input3
[ 5.835259] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (SFS^B)(res 2
spb 1) sda3 (SFS^B)(res 2 spb 2) sda4 ((res 2 spb 1)
[ 5.861150] usb 4-2: New USB device found, idVendor=0c45, idProduct=5303
[ 5.861154] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.861156] usb 4-2: Product: USB Device
[ 5.861159] usb 4-2: Manufacturer: Device
[ 5.861503] hid-generic 0003:040B:6533.0003: input: USB HID v1.00 Joystick
[A SPEED-LINK Competition Pro] on usb-0000:05:13.3-2/input0
[ 5.913061] usb 1-10: New USB device found, idVendor=0781, idProduct=5583
[ 5.913065] usb 1-10: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 5.913068] usb 1-10: Product: Ultra Fit
[ 5.913070] usb 1-10: Manufacturer: SanDisk
[ 5.913073] usb 1-10: SerialNumber: 4C530001021221121340
[ 5.938636] usb-storage 1-10:1.0: USB Mass Storage device detected
[ 5.938786] scsi host7: usb-storage 1-10:1.0
[ 6.017921] hid-generic 0003:0C45:5303.0004: device has no listeners,
quitting
[ 6.098551] input: Device USB Device as
/devices/pci0000:00/0000:00:11.0/0000:05:13.2/usb4/4-2/4-2:1.1/0003:0C45:5303.0005/input/input4
[ 6.098735] hid-generic 0003:0C45:5303.0005: input: USB HID v1.00 Mouse
[Device USB Device] on usb-0000:05:13.2-2/input1
[ 6.257922] sda: p4 size 18446744071956107760 extends beyond EOD, enabling
native capacity
[ 6.284200] sr 2:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 6.310587] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.337546] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.337736] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 6.338035] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 2) sda2 (SFS^B)(res 2
spb 1) sda3 (SFS^B)(res 2 spb 2) sda4 ((res 2 spb 1)
[ 6.364400] sda: p4 size 18446744071956107760 extends beyond EOD, truncated
[ 6.364925] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.441388] scsi 3:0:0:0: Direct-Access ATA ESA3SF1240GB V
PQ: 0 ANSI: 5
[ 6.476478] sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224
GiB)
[ 6.501746] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 6.501748] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.501754] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.501798] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.582193] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3 sdb4
[ 6.582222] scsi 6:0:0:0: Direct-Access ATA SanDisk SDCFB-25 2.33
PQ: 0 ANSI: 5
[ 6.635279] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 6.665540] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.665568] sd 6:0:0:0: [sdc] 501760 512-byte logical blocks: (257 MB/245
MiB)
[ 6.665680] sd 6:0:0:0: [sdc] Write Protect is off
[ 6.665685] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.665734] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.669513] sdc: sdc1
[ 6.670051] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.915593] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input5
[ 6.942971] EXT4-fs (sda4): couldn't mount as ext3 due to feature
incompatibilities
[ 6.970845] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input6
[ 6.999033] input: HDA ATI SB Line as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input7
[ 7.027347] input: HDA ATI SB Line Out Front as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input8
[ 7.055909] input: HDA ATI SB Line Out Surround as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input9
[ 7.084603] input: HDA ATI SB Line Out CLFE as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input10
[ 7.113637] input: HDA ATI SB Line Out Side as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input11
[ 7.142344] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input12
[ 7.171894] scsi 7:0:0:0: Direct-Access SanDisk Ultra Fit 1.00
PQ: 0 ANSI: 6
[ 7.201367] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 7.230528] sd 7:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8
GB/28.6 GiB)
[ 7.262176] sd 7:0:0:0: [sdd] Write Protect is off
[ 7.292587] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 7.293657] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 7.331129] sdd: sdd1 sdd2
[ 7.362265] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 7.424517] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
(null)
[ 7.455647] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 7.541663] devtmpfs: mounted
[ 7.572464] Freeing unused kernel memory: 872K
[ 7.602933] This architecture does not have kernel memory protection.
[ 7.831368] random: crng init done
[ 9.410153] systemd-udevd[1292]: starting version 204
[ 12.428258] usb 1-9: reset high-speed USB device number 5 using ehci-pci
[ 12.580878] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222
detected
[ 12.642256] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.675683] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.676920] usbcore: registered new interface driver rt2800usb
[ 24.426873] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 24.810952] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 35.614864] Bluetooth: Core ver 2.22
[ 35.640038] NET: Registered protocol family 31
[ 35.665281] Bluetooth: HCI device and connection manager initialized
[ 35.690780] Bluetooth: HCI socket layer initialized
[ 35.716377] Bluetooth: L2CAP socket layer initialized
[ 35.741554] Bluetooth: SCO socket layer initialized
[ 35.903446] Bluetooth: RFCOMM TTY layer initialized
[ 35.929288] Bluetooth: RFCOMM socket layer initialized
[ 35.948440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.948442] Bluetooth: BNEP filters: protocol multicast
[ 35.948452] Bluetooth: BNEP socket layer initialized
[ 36.030570] Bluetooth: RFCOMM ver 1.11
[ 40.886613] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 40.941514] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.36
[ 40.942831] ieee80211 phy0: rt2800usb_write_firmware: Info - Firmware
loading not required - NIC in AutoRun mode
[ 41.234486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.242010] 8139too 0000:06:05.0 eth1: link up, 100Mbps, full-duplex, lpa
0x45E1
[ 41.362782] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.523975] wlan0: authenticate with 00:21:29:6f:ed:19
[ 49.616598] wlan0: send auth to 00:21:29:6f:ed:19 (try 1/3)
[ 49.618233] wlan0: authenticated
[ 49.618532] rt2800usb 1-9:1.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 49.618538] rt2800usb 1-9:1.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 49.619393] wlan0: associate with 00:21:29:6f:ed:19 (try 1/3)
[ 49.621738] wlan0: RX AssocResp from 00:21:29:6f:ed:19 (capab=0x431 status=0
aid=5)
[ 49.629087] wlan0: associated
[ 49.629151] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.087742] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts:
(null)
[ 82.137927] FAT-fs (sdd1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[ 82.187261] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[ 82.215330] UDF-fs: warning (device sr0): udf_load_vrs: No VRS found
[ 82.215338] UDF-fs: warning (device sr0): udf_fill_super: No partition found
(2)
[ 82.275879] ISO 9660 Extensions: RRIP_1991A
