Hello, this passage does not work here
install the kernel using the command: sudo dpkg -i linux-image-4.5.0-rc2-powerpc64_2_powerpc.deb Once installed you need to edit yaboot.conf Use the following command: sudo nano /etc/yaboot.conf Append the following text exactly as listed at the end of the file: image=/boot/vmlinux-4.5.0-rc2-powerpc64 label=test read-only initrd=/boot/initrd.img-4.5.0-rc2-powerpc64 append="" Save yaboot.conf Apply yaboot config with following command: sudo ybin -v Reboot your G5 and when prompted, ensure you enter "test" for the label in yaboot bootloader. When i type "sudo ybin -v" after the above i get ybin: /dev/disk/by-id/scsi-SATA-WDC....... -part2: No such file or directory On 08.02.17 23:22, Richard Kuenz wrote:
Hello , this is a repost to messages here please someone may help http://debian-powerpc.debian.narkive.com/kr93F3ID/debian-8-on-late-2005-g5-graphics-issues i was away sometime from Debian@PPC after having sold my PowerMacG5 with AGP - got a Powermac G5 quad withGTX7800 and am very happpy with it . today got installed Wheezy withouth problems, everything run smooth from beginning, sound came back after short tweak, but wanted to compile kodi right from start and run in issue with gcc+ compiler too low 4.6 > 4.7+ would have been needed ... so i decided to upgrade to jessie. now i have this graphic glitch , and i cannot do anything , no login , no exiting, so my question is how can i prevent when booting debian jessie to come to this "graphical glitch" so that i can install this 3.18.kernel from Mr. Peter Saisanas that i downloaded? Thank you very much + sorry for the Newbie Interruption. Cheers + Happy Good Night. Rich
