On Tue, Oct 11, 2016 at 07:51:30PM +0200, Christian Groessler wrote: > Hi, > > on my Mac G5 I see loss of network connectivity when doing big downloads or > uploads. > > The machine cannot be pinged anymore then and also cannot ping out. > > When it's happening I see the following messages: > > Oct 11 10:45:13 g5 kernel: [ 430.477967] gem 0001:04:0f.0 eth0: RX MAC fifo > overflow smac[03810400] > Oct 11 10:45:17 g5 kernel: [ 434.141957] gem 0001:04:0f.0 eth0: RX MAC fifo > overflow smac[03810400] >
Does setting the interface down, then up works? Like ifdown eth0; ifup eth0. Or ip link set eth0 down; ip link set eth0 up, and verifying the address and route are restablished (in case you are using NetworkManager, for example). If it doesn't, does reloading the module work? rmmod sungem; modprobe sungem. Cascardo. > > Previous messages, for information: > > ... > Oct 11 10:38:36 g5 kernel: [ 1.684536] gem 0001:04:0f.0 eth0: Sun GEM > (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4c:f5:b0 > ... > Oct 11 10:38:37 g5 kernel: [ 34.578556] gem 0001:04:0f.0 eth0: Found > BCM5421-K2 PHY > ... > Oct 11 10:38:40 g5 kernel: [ 36.994117] gem 0001:04:0f.0 eth0: Link is up > at 100 Mbps, half-duplex > Oct 11 10:38:40 g5 kernel: [ 36.994246] gem 0001:04:0f.0 eth0: Pause is > disabled > ... > > > > > $ lspci > 0000:f0:0b.0 Host bridge: Apple Inc. U3H AGP Bridge > 0000:f0:10.0 VGA compatible controller: Advanced Micro Devices, Inc. > [AMD/ATI] RV360 [Radeon 9600/X1050 Series] > 0001:00:00.0 Host bridge: Apple Inc. U3 HT Bridge > 0001:00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-8131 PCI-X > Bridge (rev 12) > 0001:00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-8131 PCI-X > Bridge (rev 12) > 0001:00:03.0 PCI bridge: Apple Inc. K2 HT-PCI Bridge > 0001:00:04.0 PCI bridge: Apple Inc. K2 HT-PCI Bridge > 0001:00:05.0 PCI bridge: Apple Inc. K2 HT-PCI Bridge > 0001:00:06.0 PCI bridge: Apple Inc. K2 HT-PCI Bridge > 0001:00:07.0 PCI bridge: Apple Inc. K2 HT-PCI Bridge > 0001:01:07.0 Unassigned class [ff00]: Apple Inc. K2 KeyLargo Mac/IO (rev 60) > 0001:01:08.0 USB controller: Apple Inc. K2 KeyLargo USB > 0001:01:09.0 USB controller: Apple Inc. K2 KeyLargo USB > 0001:02:01.0 Network controller: Broadcom Corporation BCM4306 802.11b/g > Wireless LAN Controller (rev 03) > 0001:02:0b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) > 0001:02:0b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) > 0001:02:0b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller > (rev 04) > 0001:03:0d.0 Unassigned class [ff00]: Apple Inc. K2 ATA/100 > 0001:03:0e.0 FireWire (IEEE 1394): Apple Inc. K2 FireWire > 0001:04:0f.0 Ethernet controller: Apple Inc. K2 GMAC (Sun GEM) > 0001:05:0c.0 IDE interface: Broadcom K2 SATA > $ uname -a > Linux g5 3.16.0-4-powerpc64 #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) > ppc64 GNU/Linux > $ cat /proc/version > Linux version 3.16.0-4-powerpc64 (debian-ker...@lists.debian.org) (gcc > version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) > $ > > > Any ideas? > > regards, > chris >
