Hi, On Sat, Mar 26, 2016 at 5:48 PM, Scott Thompson <scot...@earthlink.net> wrote: > l have installed Jessie 8.0.0 on this Powermac G5 7,2 with an Nvidia GeForce > 6800 GT, next I installed Peter Saisanas' 4.5.0-rc2 kernel. Finally I > upgraded to testing. > > > When I boot and ssh into the machine I get this at the end of dmesg. > > > [ 17.394681] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, > 2000 mBm), (0 s) > [ 17.395263] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, > 2000 mBm), (N/A) > [ 17.395840] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > (N/A, 0 mBm), (N/A) > [ 18.923368] sungem_phy: PHY ID: 2062e0, addr: 1 > [ 18.923640] gem 0001:04:0f.0 eth0: Found BCM5421-K2 PHY > [ 19.773013] nouveau 0000:f0:10.0: gr: intr 00100000 [ERROR] nsource > 00000010 [LIMIT_COLOR] nstatus 04000000 [PROTECTION_FAULT] ch 1 [0008e000 > Xorg[874]] subc 4 class 009f mthd 0308 data 038405a0 > [ 22.535201] gem 0001:04:0f.0 eth0: Link is up at 1000 Mbps, full-duplex > [ 22.535328] gem 0001:04:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: > 7168 on: 5632) > > > and frozen checkerboard graphics. > > I tried to boot with nouveau.noaccel=1 but with LightDM I get a blank > screen. I have also tried installing XDM and with nouveau.noaccel=1 I can > get to a desktop and log in, but the colors are all wrong. > > Any suggestions?
As far as I know there is no (real) need to use Peter's kernel anymore, it was originally created because of: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=819535 Please make sure to use one of the official kernel, and then report a proper bug report if needed. Thanks
