Also add this radeon.agpmode=-1 then load yaboot sudo ybin -v then reboot Sent from my iPhone
> On Dec 2, 2014, at 2:13 PM, Michael Schaffner <li...@nopanik.org> wrote: > > Hi, > > I have a MacMini PPC(G4) triple-booting MacOSX, Debian and MorphOS. > output of mac-fdisk: > /dev/sda > # type name length base ( size ) system > /dev/sda1 Apple.._map Apple 7 @ 1 ( 3.5k) Par..map > /dev/sda2 Apple_HFS DH0 122880 @ 8 ( 60.0M) HFS > /dev/sda3 MorphOS_... DH1 9577516 @ 122888 ( 4.6G) Unknown > /dev/sda4 Apple..trap lall 31307 @ 9700404 ( 15.3M) NewW.. bootblock > /dev/sda5 Apple..SVR2 root 19890625 @ 9731711 ( 9.5G) Linux native > /dev/sda6 Apple_HFS DH2 48517808 @ 29622336 ( 23.1G) HFS > /dev/sda7 Apple_Free Extra 16 @ 78140144 ( 8.0k) Free space > > Block size=512, Number of Blocks=78140159 > DeviceType=0x0, DeviceId=0x0 > > After upgrading from wheezy to jessie a few days ago, I had some > graphics-problems (no radeon-driver > in x, just fbdev), which according to #748398 might be solved by adding > append="video=radeonfb:off" > to yaboot.conf. This led to the first start of ybin after more than 5 > years and at least 2 debian > releases :-) > > Here is most of my yaboot.conf: > > boot="/dev/disk/by-id/ata-ST940110A_3KW54W29-part4" > device=/pci@f4000000/ata-6@d/@0 > root="UUID=33a170a0-aed8-47a1-ba54-7286bea55580" > install=/usr/lib/yaboot/yaboot > magicboot=/usr/lib/yaboot/ofboot > enablecdboot > enablenetboot > enableofboot > defaultos=linux > darwin=/dev/sda2 > macosx=/dev/sda6 > > image=/boot/vmlinux > label=Linux > read-only > # append="video=radeonfb:off" > initrd=/boot/initrd.img > initrd-size=8192 > partition=5 > > I had to change /dev/hda(2|6) to /dev/sda(2|6) to stop ybin from > complaining, after that ybin -v ran without any error-message. > > Now I can't boot into linux from yaboot anymore, I get the following error: > /pci@f4000000/ata-6@d/@0:5,/boot/vmlinux: unknown or corrupt filesystem > But yaboot starts up and I'm able to boot into MorphOS, MacOSX, > Openfirmware and from CD. > > I have no separate /boot-partition (/ is ext2). > > I tried the following: > - boot from jessie-install-cd, cancel, start shell, mount /dev/sda5, > bind-mount /dev,/sys, /proc and so on, chroot to this, then: > - ybin -v: works, but no difference > - mkofboot: works, but no difference > - yabootconfig and comparing the relevant parts of the generated file to > mine > - try without the append-line -> no difference > - try the absolute path to kernel and initrd instead of links -> no > difference > > I even tried putting the files to the HFS-partition and made a label to > load them from /dev/sda6 - this gives the error message: not a valid ELF > image. > > I don't have any clue what's going on and what further steps I could > take. After all, this device has booted all 3 OSes successfully for ages. > > Thanks a lot for reading till the end and bye.. > Michael > > > -- > To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: https://lists.debian.org/547e1d6b.5010...@nopanik.org > -- To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/819af8e0-0923-4b52-beca-436a00e00...@gmail.com
