Em Qui, 2011-08-18 às 15:57 -0400, Milan Kupcevic escreveu: > On 08/18/2011 09:04 AM, Gunther Furtado wrote: > > Hi, > > > > With the latest update, kernel doesn't recognize my HD (neither uuid > > nor /dev/hdaX). When I boot into it, I get to an initramfs shell and > > when I run > > > > ls /dev/ > > > > there isn't anything that I could perceive as hd. I've read on the list > > that the modules would be changed, is this it? > > > > Where else should I look? > > > > iMac G3 > > ATA device, with non-removable media > > Model Number: Maxtor 93073U4 > > Serial Number: N417ABEC > > Firmware Revision: BAC51JJ0 > > > > The previous 3.0 version of the kernel booted without any noise. > > > > thanks, > > > > When you get the shell try to type > > modprobe pata_macio > > then see if you have new stuff in /dev/
It sure does! Even disk-by-uuid. > > At least one ATA controller should work with this module. If you are > lucky and your HD is connected to this controller then press ctrl+D and > it will boot fine. Then do this: > > echo pata_macio >> /etc/initramfs-tools/modules > update-initramfs -u > > Otherwise you will have to figure out which ATA controller you have in > your machine and then determine which driver module will run it. > Thanks. Everything is in place now! > > Milan > > -- To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1313700230.7372.3.ca...@shknemo.gbcm.net
