After upgrading a new install of debian on an 17" Imac-G5, the terminal output while booting freezes after:
Apr 30 13:40:14 isight syslogd 1.5.0#5: restart. Apr 30 13:40:14 isight kernel: klogd 1.5.0#5, log source = /proc/kmsg started. Apr 30 13:40:14 isight kernel: [ 0.000000] DART table allocated at: c00000005f000000 Apr 30 13:40:14 isight kernel: [ 0.000000] Using PowerMac machine description Apr 30 13:40:14 isight kernel: [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24 Apr 30 13:40:14 isight kernel: [ 0.000000] Found initrd at 0xc000000001c00000:0xc00000000256b400 Apr 30 13:40:14 isight kernel: [ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 Apr 30 13:40:14 isight kernel: [ 0.000000] Mapped at 0xd000080080000000 Apr 30 13:40:14 isight kernel: [ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000 Apr 30 13:40:14 isight kernel: [ 0.000000] PowerMac motherboard: iMac G5 (iSight) Apr 30 13:40:14 isight kernel: [ 0.000000] DART IOMMU initialized for U4 type chipset Apr 30 13:40:14 isight kernel: [ 0.000000] console [udbg0] enabled Apr 30 13:40:14 isight kernel: [ 0.000000] CPU maps initialized for 1 thread per core Apr 30 13:40:14 isight kernel: [ 0.000000] (thread shift is 0) Apr 30 13:40:14 isight kernel: [ 0.000000] Starting Linux PPC64 #1 SMP Sat Mar 14 07:05:27 UTC 2009 Apr 30 13:40:14 isight kernel: [ 0.000000] ----------------------------------------------------- Apr 30 13:40:14 isight kernel: [ 0.000000] ppc64_pft_size = 0x0 Apr 30 13:40:14 isight kernel: [ 0.000000] physicalMemorySize = 0x60000000 Apr 30 13:40:14 isight kernel: [ 0.000000] htab_address = 0xc00000005c000000 Apr 30 13:40:14 isight kernel: [ 0.000000] htab_hash_mask = 0x3ffff Apr 30 13:40:14 isight kernel: [ 0.000000] ----------------------------------------------------- Apr 30 13:40:14 isight kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 30 13:40:14 isight kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 30 13:40:14 isight kernel: [ 0.000000] Linux version 2.6.26-1-powerpc64 (Debian 2.6.26-13lenny2) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Mar 14 07:05:27 UTC 2009 Apr 30 13:40:14 isight kernel: [ 0.000000] [boot]0012 Setup Arch Apr 30 13:40:14 isight kernel: [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 Apr 30 13:40:14 isight kernel: [ 0.000000] Memory hole size: 0MB Apr 30 13:40:14 isight kernel: [ 0.000000] Entering add_active_range(0, 0, 393216) 0 entries of 256 used Apr 30 13:40:14 isight kernel: [ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 Apr 30 13:40:14 isight kernel: [ 0.000000] PCI host bridge /p...@0,f0000000 ranges: Apr 30 13:40:14 isight kernel: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 Apr 30 13:40:14 isight kernel: [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 Apr 30 13:40:14 isight kernel: [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Apr 30 13:40:14 isight kernel: [ 0.000000] Can't get bus-range for /h...@0,f2000000, assume bus 0 Apr 30 13:40:14 isight kernel: [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 Apr 30 13:40:14 isight kernel: [ 0.000000] PCI host bridge /h...@0,f2000000 (primary) ranges: Apr 30 13:40:14 isight kernel: [ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: Checking bank 0... Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: gen0=442, gen1=441 Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: Active bank is: 0 Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: OF partition at 0x410 Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: XP partition at 0x1020 Apr 30 13:40:14 isight kernel: [ 0.000000] nvram: NR partition at 0x1120 Apr 30 13:40:14 isight kernel: [ 0.000000] Zone PFN ranges: Apr 30 13:40:14 isight kernel: [ 0.000000] DMA 0 -> 393216 Apr 30 13:40:14 isight kernel: [ 0.000000] Normal 393216 -> 393216 Apr 30 13:40:14 isight kernel: [ 0.000000] Movable zone start PFN for each node Apr 30 13:40:14 isight kernel: [ 0.000000] early_node_map[1] active PFN ranges Apr 30 13:40:14 isight kernel: [ 0.000000] 0: 0 -> 393216 Apr 30 13:40:14 isight kernel: [ 0.000000] On node 0 totalpages: 393216 Apr 30 13:40:14 isight kernel: [ 0.000000] DMA zone: 5376 pages used for memmap Apr 30 13:40:14 isight kernel: [ 0.000000] DMA zone: 0 pages reserved Apr 30 13:40:14 isight kernel: [ 0.000000] DMA zone: 387840 pages, LIFO batch:31 Apr 30 13:40:14 isight kernel: [ 0.000000] Normal zone: 0 pages used for memmap Apr 30 13:40:14 isight kernel: [ 0.000000] Movable zone: 0 pages used for memmap Apr 30 13:40:14 isight kernel: [ 0.000000] [boot]0015 Setup Done Apr 30 13:40:14 isight kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 387840 Apr 30 13:40:14 isight kernel: [ 0.000000] Policy zone: DMA Apr 30 13:40:14 isight kernel: [ 0.000000] Kernel command line: root=/dev/sda3 ro Apr 30 13:40:14 isight kernel: [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs Apr 30 13:40:14 isight kernel: [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f Apr 30 13:40:14 isight kernel: [ 0.000000] mpic: Initializing for 124 sources Apr 30 13:40:14 isight kernel: [ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4 Apr 30 13:40:14 isight kernel: [ 0.000000] mpic: - HT:01.0 [0x90] vendor 106b device 0053 has 86 irqs Apr 30 13:40:14 isight kernel: [ 0.000000] Failed to map cascade IRQ Apr 30 13:40:14 isight kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Apr 30 13:40:14 isight kernel: [ 0.000000] time_init: decrementer frequency = 33.333333 MHz Apr 30 13:40:14 isight kernel: [ 0.000000] time_init: processor frequency = 1899.999996 MHz Apr 30 13:40:14 isight kernel: [ 0.000000] clocksource: timebase mult[7800001] shift[22] registered Apr 30 13:40:14 isight kernel: [ 0.000000] clockevent: decrementer mult[888] shift[16] cpu[0] Apr 30 13:40:14 isight kernel: [ 0.000988] Console: colour dummy device 80x25 Apr 30 13:40:14 isight kernel: [ 0.001814] console handover: boot [udbg0] -> real [tty0] The machine continues to boot and in the end is accessable with ssh, xorg however is not able to display anything. Anyone seen this problem? Roel Wagenaar -- Roel Wagenaar, Timmerman-aannemer, Tel.: 0513-789900. If a turtle doesn't have a shell, is it homeless or naked? -- To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
