Hi there. I just compiled a new 2.6.27-rc5 kernel for my standard Kurobox (an embedded NAS that has an MPC8241 CPU, if I'm not mistaken) and upon booting, I get these scary messages and Call Traces:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Linux version 2.6.27-rc5.try03 ([EMAIL PROTECTED]) (gcc version 4.2.0) #4 Mon Sep 8 21:12:13 BRT 2008 (...) physmap platform flash device: 00400000 at ffc00000 physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 physmap-flash.0: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition information Creating 6 MTD partitions on "physmap-flash.0": 0x00000000-0x00300000 : "mtd_firmimg" 0x00300000-0x00370000 : "mtd_bootcode" kobject (c395b278): tried to init an initialized object, something is seriously wrong. Call Trace: [c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable) [c381dcc0] [c013a308] kobject_init+0x64/0xa4 [c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78 [c381dd10] [c0135574] blk_register_filter+0x4c/0x70 [c381dd20] [c01340a4] add_disk+0x68/0xbc [c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4 [c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80 [c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84 [c381dd90] [c01ac118] add_mtd_device+0xa8/0x140 [c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0 [c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318 [c381de50] [c0175864] platform_drv_probe+0x20/0x30 [c381de60] [c0174748] driver_probe_device+0xb8/0x1e8 [c381de80] [c01738ec] bus_for_each_drv+0x70/0xac [c381deb0] [c01749c8] device_attach+0x84/0xa8 [c381ded0] [c01736e0] bus_attach_device+0x6c/0x78 [c381dee0] [c01720bc] device_add+0x47c/0x5c8 [c381df30] [c0175d30] platform_device_add+0x14c/0x1b4 [c381df50] [c03245fc] physmap_init+0x30/0x48 [c381df60] [c0003874] do_one_initcall+0x38/0x1a0 [c381dfd0] [c030a17c] kernel_init+0x88/0xf4 [c381dff0] [c000fd4c] kernel_thread+0x44/0x60 0x00370000-0x00380000 : "mtd_status" kobject (c395b278): tried to init an initialized object, something is seriously wrong. Call Trace: [c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable) [c381dcc0] [c013a308] kobject_init+0x64/0xa4 [c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78 [c381dd10] [c0135574] blk_register_filter+0x4c/0x70 [c381dd20] [c01340a4] add_disk+0x68/0xbc [c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4 [c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80 [c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84 [c381dd90] [c01ac118] add_mtd_device+0xa8/0x140 [c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0 [c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318 [c381de50] [c0175864] platform_drv_probe+0x20/0x30 [c381de60] [c0174748] driver_probe_device+0xb8/0x1e8 [c381de80] [c01738ec] bus_for_each_drv+0x70/0xac [c381deb0] [c01749c8] device_attach+0x84/0xa8 [c381ded0] [c01736e0] bus_attach_device+0x6c/0x78 [c381dee0] [c01720bc] device_add+0x47c/0x5c8 [c381df30] [c0175d30] platform_device_add+0x14c/0x1b4 [c381df50] [c03245fc] physmap_init+0x30/0x48 [c381df60] [c0003874] do_one_initcall+0x38/0x1a0 [c381dfd0] [c030a17c] kernel_init+0x88/0xf4 [c381dff0] [c000fd4c] kernel_thread+0x44/0x60 0x00380000-0x00400000 : "mtd_conf" kobject (c395b278): tried to init an initialized object, something is seriously wrong. Call Trace: [c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable) [c381dcc0] [c013a308] kobject_init+0x64/0xa4 [c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78 [c381dd10] [c0135574] blk_register_filter+0x4c/0x70 [c381dd20] [c01340a4] add_disk+0x68/0xbc [c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4 [c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80 [c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84 [c381dd90] [c01ac118] add_mtd_device+0xa8/0x140 [c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0 [c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318 [c381de50] [c0175864] platform_drv_probe+0x20/0x30 [c381de60] [c0174748] driver_probe_device+0xb8/0x1e8 [c381de80] [c01738ec] bus_for_each_drv+0x70/0xac [c381deb0] [c01749c8] device_attach+0x84/0xa8 [c381ded0] [c01736e0] bus_attach_device+0x6c/0x78 [c381dee0] [c01720bc] device_add+0x47c/0x5c8 [c381df30] [c0175d30] platform_device_add+0x14c/0x1b4 [c381df50] [c03245fc] physmap_init+0x30/0x48 [c381df60] [c0003874] do_one_initcall+0x38/0x1a0 [c381dfd0] [c030a17c] kernel_init+0x88/0xf4 [c381dff0] [c000fd4c] kernel_thread+0x44/0x60 0x00000000-0x00400000 : "mtd_allflash" kobject (c395b278): tried to init an initialized object, something is seriously wrong. Call Trace: [c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable) [c381dcc0] [c013a308] kobject_init+0x64/0xa4 [c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78 [c381dd10] [c0135574] blk_register_filter+0x4c/0x70 [c381dd20] [c01340a4] add_disk+0x68/0xbc [c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4 [c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80 [c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84 [c381dd90] [c01ac118] add_mtd_device+0xa8/0x140 [c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0 [c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318 [c381de50] [c0175864] platform_drv_probe+0x20/0x30 [c381de60] [c0174748] driver_probe_device+0xb8/0x1e8 [c381de80] [c01738ec] bus_for_each_drv+0x70/0xac [c381deb0] [c01749c8] device_attach+0x84/0xa8 [c381ded0] [c01736e0] bus_attach_device+0x6c/0x78 [c381dee0] [c01720bc] device_add+0x47c/0x5c8 [c381df30] [c0175d30] platform_device_add+0x14c/0x1b4 [c381df50] [c03245fc] physmap_init+0x30/0x48 [c381df60] [c0003874] do_one_initcall+0x38/0x1a0 [c381dfd0] [c030a17c] kernel_init+0x88/0xf4 [c381dff0] [c000fd4c] kernel_thread+0x44/0x60 0x00310000-0x00400000 : "mtd_data" kobject (c395b278): tried to init an initialized object, something is seriously wrong. Call Trace: [c381dc80] [c000806c] show_stack+0x4c/0x16c (unreliable) [c381dcc0] [c013a308] kobject_init+0x64/0xa4 [c381dcd0] [c013a920] kobject_init_and_add+0x30/0x78 [c381dd10] [c0135574] blk_register_filter+0x4c/0x70 [c381dd20] [c01340a4] add_disk+0x68/0xbc [c381dd40] [c01b1210] add_mtd_blktrans_dev+0x17c/0x2b4 [c381dd60] [c01b1490] mtdblock_add_mtd+0x60/0x80 [c381dd70] [c01b08d8] blktrans_notify_add+0x44/0x84 [c381dd90] [c01ac118] add_mtd_device+0xa8/0x140 [c381ddb0] [c01ad860] add_mtd_partitions+0x55c/0x6b0 [c381de10] [c01b5cc4] physmap_flash_probe+0x2d8/0x318 [c381de50] [c0175864] platform_drv_probe+0x20/0x30 [c381de60] [c0174748] driver_probe_device+0xb8/0x1e8 [c381de80] [c01738ec] bus_for_each_drv+0x70/0xac [c381deb0] [c01749c8] device_attach+0x84/0xa8 [c381ded0] [c01736e0] bus_attach_device+0x6c/0x78 [c381dee0] [c01720bc] device_add+0x47c/0x5c8 [c381df30] [c0175d30] platform_device_add+0x14c/0x1b4 [c381df50] [c03245fc] physmap_init+0x30/0x48 [c381df60] [c0003874] do_one_initcall+0x38/0x1a0 [c381dfd0] [c030a17c] kernel_init+0x88/0xf4 [c381dff0] [c000fd4c] kernel_thread+0x44/0x60 usbmon: debugfs is not available - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - I'm attaching the dmesg and my .config to this message if it is needed. If anything else is needed, please let me know. This kernel was cross-compiled with my own homebrewed system (I'm using Debian unstable for x86-64 on the host and Debian testing for powerpc on the target). I am open to any suggestions. If I can help chasing the cause of such scary messages in anyway, please let me know. Thanks in advance, Rogério Brito. -- Rogério Brito : [EMAIL PROTECTED],ime.usp}.br : GPG key 1024D/7C2CAEB8 http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
