On Fri, 2008-08-01 at 13:35 -0700, Bizhan Gholikhamseh (bgholikh) wrote: > > > -----Original Message----- > > From: Michel Dänzer [mailto:[EMAIL PROTECTED] > > > > On Thu, 2008-07-31 at 15:49 -0700, Bizhan Gholikhamseh > > (bgholikh) wrote: > > > > > > We have an embedded custom board PowerPC board (Freescale). > > > I have booted Debian 3.1 (Sarge) on the system running on Linux > > > kernel 2.6.23. > > > I have an ATI graphic card Radeon 9250 PCI card. > > > > > > I would like to run flash application on the graphic card to do > > > performance testing on the flash performance on the system. > > > > > > I am not able to get anything out of the Graphic card, my > > assumption > > > is XFree86 has x86 emulation and will load appropriate > > driver module > > > for the card. > > > > In theory, yes. Please provide the /etc/X11/XF86Config-4 or > > /etc/X11/xorg.conf file you're using and the > > /var/log/XFree86.0.log or /var/log/Xorg.0.log file resulting > > from trying to start the X server. > > I have attached the log file and the configuration file.
[...] > Fatal server error: > xf86OpenConsole: Cannot find a free VT Is CONFIG_VT enabled in your kernel build configuration? Does fiddling with any of the options listed by XFree86 -help 2>&1|grep -i vt help? -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
