On Dec 14, 2007, at 11:20 PM, Peter Rooney wrote:
Dear James,
Ah, BootX. This sounds creepily familiar. My guess on where to
start is asking
if the kernel the installer _used_ is the same as the one that got
_installed_?
(this first bit me in Debian woody). The kernel that BootX uses in
Macintosh HD:System Folder:Linux Kernels:
must be exactly the same as the one in your /boot directory. So:
did you copy
the newly installed kernel over to your MacOS drive? i. e.
# mount -t hfs /dev/sdXN /mnt/ || mount -t hfsplus /dev/sdXN /mnt/
# cp /boot/vmlinux-2.6.18-4-powerpc /mnt/System\ Folder/Linux\
Kernels/
# cp /boot/System.map-2.6.18-4-powerpc /mnt/System\ Folder/Linux\
Kernels/
# umount /mnt
# shutdown -r now
Secondly, i seem to recall that Linux treats USB sticks as generic
SCSI devices.
The order of the devices is not carved in stone as they are for IDE
drives, so
taking the USB drive out after installation could mess things up a
lot, namely
DURING INSTALL
usb stick - /dev/sda
OS 9 disk - /dev/sdb
Linux - /dev/sdc
AFTER INSTALL
OS 9 disk - /dev/sda
Linux - /dev/sdb
so that /dev/sdc doesn't even exist anymore.
Anyways, hope that gives you some ideas on where to look next.
Peter
When you copy the kernel into the OS-9 partition, you should also
copy the initrd. And don't forget to tell BootX about both of them
after you boot into OS-9.
Rick
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
