Hi All, SHORT VERSION: -------------- 1. I had a problem with my USB mouse on an iBook G3. 2. It took a lot of hard work to solve the problem. 3. I'd like to know where to put my solution for others to find (and find easily! ;).
For more details read on... LONG VERSION: ------------- I am wondering where I should put this tip/solution I worked out for fixing a very jerky mouse pointer under X on my iBook G3. The problem goes something like this: - While running X (happens in both Gnome and KDE) - and using the mouse - the pointer will freeze - at irregular intervals - for about 0.5 sec or so - then jump, to where it (probably?) "should be" - by which point I have "over moved" the mouse - and missed the button I was trying to hit - all of which - results in a system which is very hard to use. I noted that the problem was *less* pronounced when the system was under heavy load (eg. by running system monitor - which takes a lot of CPU!). This made sense once I discovered the cause of the jerkiness. The specs of the machine/setup are: - Apple iBook G3 600MHz - 384 MB RAM - USB Mouse Connected - Debian Etch (4.0) And uname -a gives: >> Linux ibook3 2.6.18-5-powerpc #1 Sun Aug 12 21:01:27 UTC 2007 ppc GNU/Linux So, as for the solution... It turns out the cause is apparently the CPU frequency switching done by (power saving part of) the linux kernel. I don't believe the issue is necessarily with the kernel itself, though I could be wrong. It seems more likely it is some hardware problem, where a CPU frequency change causes a pause in processing. And perhaps only with this generation and model of iBook? For anyone else who has this problem, my tip is to: - Try disabling the cpu frequency switching of the linux kernel. To do so, my current method is to execute: >> echo 600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq This confines the governor to using a range between 600 and 600MHz, instead of between 400 and 600MHz as it is at bootup, which effectively disables frequency switching. It took me about 2 days to work out the cause and above solution. I actually found one very fleeting hint indicating a link between such system hiccups and CPU frequency changes on a website while Googling early one, but it was another 1.5 days before, after trying a bunch of other methods, I decided I really should work out if completely disabling it would do the trick. Playing with governors, which I did at various points, did seem to help some, but didn't make the problem disappear altogether. Unfortunately, no amount of Googling since then has brought up that "life saving" site, or any other that mentions anything similar. So I guess I was very lucky I found it! I also guess not too many other people have suffered this problem, since, as I said, I can't get much on Google about the issue. But just in case someone does try installing Debian + Linux 2.6 on an iBook G3 and does just happen to have the same problem crop up, I thought I should park my tip somewhere they would be able to find it. My question therefore is: > Where should we be putting such tips on issues with Linux on iBook hardware? Any and all advice is appreciated (including how to disable frequency switching permanently!). Cheers, Jarrod. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
