Subject: PPC installer kernel panic from libc problem From: Peter Czanik <[EMAIL PROTECTED]> Date: Thu, 21 Jun 2007 16:21:06 +0200
To: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso Date: Thu Jun 21 16:03:46 CEST 2007 Machine: Genesi Pegasos PPC ( http://www.genesippc.com/pegasos.php ) Processor: 7447/7457, altivec supported Memory: 256MB Partitions: Not really relevant, but here you go... Disk /dev/hda: 40,0GB Sector size (logical/physical): 512B/512B Partition Table: amiga Number Start End Size File system Name Flags 1 8225kB 1078MB 1069MB ext2 primary , , , , , , , , , , , 2 1078MB 2147MB 1069MB linux-swap primary , , , , , , , , , , , 3 2147MB 11,8GB 9656MB ext3 primary , , , , , , , , , , , 4 11,8GB 21,5GB 9656MB ext3 primary , , , , , , , , , , , 5 21,5GB 31,1GB 9656MB ext3 primary , , , , , , , , , , , 6 31,1GB 40,0GB 8900MB ext3 primary , , , , , , , , , , , Disk /dev/hdb: 80,0GB Sector size (logical/physical): 512B/512B Partition Table: amiga Number Start End Size File system Name Flags 1 516kB 1025MB 1024MB linux-swap primary , , , , , , , , , , , 2 1025MB 20,0GB 19,0GB reiserfs primary , , , , , , , , , , , 3 20,0GB 30,0GB 10,0GB ext3 primary , , , , , , , , , , , 4 30,0GB 40,0GB 10000MB ext3 primary , , , , , , , , , , , 5 40,0GB 50,0GB 10000MB ext3 primary , , , , , , , , , , , 6 50,0GB 60,0GB 10000MB ext3 primary , , , , , , , , , , , 7 60,0GB 70,0GB 10000MB ext3 primary , , , , , , , , , , , 8 74,0GB 80,0GB 5991MB ext3 primary , , , , , , , , , , , Output of lspci -nn and lspci -vnn: 0000:00:00.0 Host bridge [Class 0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03) 0000:00:01.0 FireWire (IEEE 1394) [Class 0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 46) 0000:00:05.0 USB Controller [Class 0c03]: NEC Corporation USB [1033:0035] (rev 43) 0000:00:05.1 USB Controller [Class 0c03]: NEC Corporation USB [1033:0035] (rev 43) 0000:00:05.2 USB Controller [Class 0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) 0000:00:0c.0 ISA bridge [Class 0601]: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] [1106:8231] (rev 10) 0000:00:0c.1 IDE interface [Class 0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) 0000:00:0c.2 USB Controller [Class 0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) 0000:00:0c.3 USB Controller [Class 0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) 0000:00:0c.4 Bridge [Class 0680]: VIA Technologies, Inc. VT8235 ACPI [1106:8235] (rev 10) 0000:00:0c.5 Multimedia audio controller [Class 0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 40) 0000:00:0c.6 Communication controller [Class 0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 20) 0000:00:0d.0 Ethernet controller [Class 0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 51) 0001:01:00.0 Host bridge [Class 0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03) 0001:01:08.0 VGA compatible controller [Class 0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) 0001:01:08.1 Display controller [Class 0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card: [ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: Installation fails right after the kernel is booted with the following message: /bin/sh: symbol lookup error: /lib/libc.so.6: undefined symbol: _rtld_global Kernel panic - not syncing: attembed to kill init! Rebooting in 180 seconds..
