On 6/1/07, Georg Heinrich <[EMAIL PROTECTED]> wrote:
Hello,
I don't get wlan with wpa working on my powerbook g4 with etch.
This is the lspci output:
0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)
This is my /etc/network/interfaces file:
auto eth2
iface eth2 inet manual
wpa-sriver wext
wpa-driver ?? It's a "d" ?
Best regards,
Bin
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface office inet dhcp
iface anywhere inet dhcp
This is my /etc/wpa_supplicant/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
network={
id_str="office"
ssid="gh-office-wlan" # = airport network name
psk="64-byte hex-string obtained with wpa_passphrase"
}
network={
id_str="anywhere"
ssid=""
key_mgmt=NONE
}
The network-admin says "wireless network eth2 active" but under
properties, the network is not selected. It appears in the pop-up menu
though and I can select it, but afterwards ping returns "network unreachable".
There is no wpa_action.log file in /var/log.
Any ideas?
Thanks in advance,
G. Heinrich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
