Le Tue, May 01, 2007 at 09:54:49PM -0400, Wakko Warner a écrit : > Charles Plessy wrote: > > Thanks for the hint. I added the following line in xorg.conf: > > > > ModeLine "1920x1200" 138 1920 2048 2256 2592 1200 1201 1204 > > 1242 > > > > Howerver, I can not go lower than 138 (it freezes the system), and it is > > still > > too high to solve the problem. I also added: > > You probably can't go lower. That's the dot clock. The higher the > resolution, the higher the dot clock for the same refresh rate.
Hi, The lowest I managed was: Modeline "1920x1200" 114.0 1920 1984 2016 2144 1200 1203 1206 1212 -HSync +Vsync but it did not suppress the problems (although they were greately reduced) However, as we say in French, "la nuit porte conseil" (sleeping provides advices), and I remembered that I read somewhere that on some dual head cards, not all ports were equal. This morning, I plugged the monitor on the port on the left hand side, and it works perfectly, without modeline. Many thanks for your help anyway, I would not have had the idea without the intense googling that your answers prompted me to do. Have a nice day, -- Charles Plessy http://charles.plessy.org Wako, Saitama, Japan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
