Hi All
On Wed, Apr 18 2007, at 10:55 +0200, Uwe Steinmann wrote:
> On Tue, Apr 17, 2007 at 06:46:10PM -0400, Andrew J. Barr wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > Hi, what is the recommended method of controlling the CPU clock speed on
> > PowerBooks (Alu PowerBook G4, 1.67 GHz PowerPC 7447A)?
Seems we have the same machine:
$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.5 (pvr 8003 0105)
bogomips : 16.57
timebase : 8320000
platform : PowerMac
machine : PowerBook5,8
motherboard : PowerBook5,8 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 00000019
L2 cache : 512K unified
pmac-generation : NewWorld
I'm running cpufreqd since quite some time without any hassles that
I'd be aware of .. IIRC it was a bit difficult to edit
/etc/cpufreqd.conf some time ago, but after that was done it just
worked, as it seems.
I didn't even remember I had cpufreqd running when I started reading
this thread. A quick
$ ps ax | grep -i cpufreqd
2021 ? Ss 9:03 /usr/sbin/cpufreqd -f /etc/cpufreqd.conf
revealed I had that software installed and running, indeed. For a
quick start I attach my current /etc/cpufreqd.conf (No guarantees it's
right, but it seems to work ... :).
> > I usually use powernowd because it's fairly simple and requires no
> > configuration,
Sorry, I don't remember having had installed powernowd. So I can't
write anything on that ...
> > but the package description says that it works best
> > with CPUs that have more than two steps on them, which the PowerPC
> > I have does not. I'd rather not have to configure cpufreqd to my
> > tastes, but if that is what's needed I will. Any suggestions?
> Stay with powernowd and read the thread 'bug in cpufreqd?' in this
> list. I switched to powernowd because of problems with cpufreqd.
I think I never read that thread until today, so I just had a glance
on it now, and I confess I can't relate the problems described in there
with the minor probs I have on this machine:
The "kernel lockups" described in there -- provided we're talking
about the same thing, but I doubt that heavily -- seem to have
happened here about a year ago when some X package(s?) had issues here
on my Powerbook. But I believe this was a veritable X crash here, no
kernel lockup. But these problems are gone and everything here, with
a relatively fresh unstable Debian, works like a charm. There are
minor problems from time to time, but they're so small I don't even
remember what they are ...
Yes I had some probs here, some months ago, after I played with my
hdparm.conf: after that when booting the machine the hard disk was not
found by the system at times. I reinstalled my old hdparm.conf, and
all seems fine again ...
Oh yes, some config here, might be useful:
_________________________________________
$ zgrep FREQ /proc/config.gz
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_PMAC=y
$ cat /proc/version
Linux version 2.6.18-rc4-060811-dirty ([EMAIL PROTECTED]) (gcc version
4.1.2 20060729 (prerelease) (Debian 4.1.1-10)) #1 Fri Aug 11 00:16:22
CEST 2006
$ apt-cache policy cpufreqd
cpufreqd:
Installed: 2.2.1-2
Candidate: 2.2.1-2
--------------------------------------------
HTH
Good luck
Best Regards
Wolfgang
--
Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/
http://profiles.yahoo.com/wolfgangpfeiffer
I made slight changes on Key ID: E3037113. Please refresh it.
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
# this is a comment
# see CPUFREQD.CONF(5) manpage for a complete reference
[General]
pidfile=/var/run/cpufreqd.pid
poll_interval=2
enable_plugins= programs,cpu,apm,pmu
verbosity=4
enable_remote=1
remote_group=root
[/General]
[Profile]
name=On Demand Low
minfreq=20%
maxfreq=48%
policy=powersave
[/Profile]
[Profile]
name=On Demand High
minfreq=40%
maxfreq=100%
policy=powersave
[/Profile]
[Profile]
name=Performance High
minfreq=41%
maxfreq=100%
policy=performance
[/Profile]
[Profile]
name=Performance Low
minfreq=45%
maxfreq=80%
policy=powersave
[/Profile]
[Profile]
name=Powersave High
minfreq=70%
maxfreq=70%
policy=powersave
[/Profile]
[Profile]
name=Powersave Low
minfreq=30%
maxfreq=30%
policy=powersave
[/Profile]
##
# Basic states
##
# when AC use powersave mode
[Rule]
name=AC Low Rule
ac=on # (on/off)
profile=Performance Low
[/Rule]
# when AC use performance
[Rule]
name=AC Rule
ac=on # (on/off)
cpu_interval=9-100
profile=Performance High
[/Rule]
# conservative mode when not AC
[Rule]
name=AC Off - Low Battery
ac=off # (on/off)
battery_interval=0-30
profile=Powersave Low
[/Rule]
# conservative mode when not AC
[Rule]
name=AC Off - Medium Battery
ac=off # (on/off)
battery_interval=30-70
profile=On Demand Low
[/Rule]
# stay in performance mode for the first minutes
[Rule]
name=AC Off - High Power
ac=off # (on/off)
battery_interval=70-100
profile=On Demand High
[/Rule]
##
# Special Rules
##
# CPU Too hot!
[Rule]
name=CPU Too Hot
# acpi_temperature=55-100
cpu_interval=91-100
profile=Performance Low
[/Rule]
# CPU IDLE!
[Rule]
name=CPU Idle
cpu_interval=0-8
profile=Performance Low
[/Rule]
# use performance mode if I'm watching a movie
# I don't care for batteries!
# But don't heat too much.
[Rule]
name=Movie Watcher
programs=xine,mplayer,gmplayer
battery_interval=0-100
# acpi_temperature=0-60
cpu_interval=0-100
profile=Performance High
[/Rule]
