Are you running a 2.4 or 2.6 kernel? Sarge does have a 2.6 kernel avaiable I would try that first before anything else.
Ananda On Wed, 31 Jan 2007 10:57:23 -0600 Dan Page <[EMAIL PROTECTED]> wrote: > Hello. I've just joined this list so I apologize if this issue has been > addressed: > > I've installed Debian sarge on a Blue and white G3. This box is planned > to be used as a DNS resolver for our network. I got DJB DNS set up and > working like a champ, my problem lies in the network card. We use > gigabit fiber for our core network and I chose this model because it has > the 64 bit pci bus that most giga fiber cards use. I installed a Intel > gigabit card installed. The e1000.0 module that this card requires is > present in the kernel but for some reason it doesn't load. I don't know > if its related but the drivers for the USB and Firewire don't load > properly either. here is an except from the dmesg log > > ieee1394: SelfIDs failed monotony check with 22/0 > ieee1394: Error in SelfID stage, resetting > pcilynx0: resetting bus (long bus reset) on request > pcilynx0: bus reset interrupt > pcilynx0: SelfID process finished (phyid 0, root) > pcilynx0: SelfID packet 0x568c7f80 rcvd > ieee1394: SelfIDs failed monotony check with 22/0 > > this repeats about 50 times then: > > ieee1394: Stopping out-of-control reset loop > ieee1394: Warning - topology map and speed map will not be valid > pcilynx0: invalid transaction code > ieee1394: got invalid ack 254 from node 65535 (tcode 4) > ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... > ieee1394: Stopping reset loop for IRM sanity > > > Thanks in advance for any insite. > > Dan > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
