On Tue, Sep 26, 2006 at 02:51:42PM -0500, Mathew Binkley wrote: > Hello. I attemped to install Debian Etch on a IBM JS20 using an iso > from 09/22/2006. The install works correctly until it tries (and fails) > to detect the PATA hard drive. None of the modules listed will work > with it. > > When I install SuSE 9.1 on the same blade, it shows the hard drive in > the logs as: > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > AMD8111: IDE controller at PCI slot 0000:00:04.1 > AMD8111: chipset revision 3 > AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller > AMD8111: 100% native mode on irq 32 > ide0: BM-DMA at 0x7c00-0x7c07, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x7c08-0x7c0f, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: FUJITSU MHT2040AS, ATA DISK drive > Unhandled interrupt 20, disabled > ide0 at 0x7400-0x7407,0x6c02 on irq 32 > Probing IDE interface ide1... > Probing IDE interface ide1... > hda: max request size: 128KiB > hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) > hda: cache flushes supported > hda: hda1 hda2 hda3 > > I'm presuming that the AMD8111 chipset is not currently supported under > Debian Etch for PPC. Am I wrong, or is there another explanation? Thanks!
The amd74xx is the one in charge, can you go into a console, and then do an lsmod to see if it is loaded ? can you try modprobing it ? I can't really check it out myself, since my devel box is currently down right now, and i have no checked out tree. Mayube someone else within the d-i team can look at the powerpc kernel .udebs to see where the amd74xx module is included and further help MAthew ? (i will also mostly be offline until friday). Friendly, Sven Luther -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
