On 6/24/06, Francesco Pedrini <[EMAIL PROTECTED]> wrote:
Alle Saturday 24 June 2006 16:54, Bin Zhang ha scritto: > On 6/24/06, Francesco Pedrini <[EMAIL PROTECTED]> wrote: > > Hi, > > i've some problem with the bcm43xx driver: > > First of all i wasn't able to get the AirPort to 54 mbit, it only > > works at 11 mbit. > > Same for me. It's the default in 2.6.17.There is a way to change this behaviour? something like changing a value on the source file or similar?
It seems to me that 54mbit has some problem, don't use it.
> > The other problem is that after the resume the wireless interface > > seems configured but it isn't functional, i must get it down, > > remove and reinserting the module and reconfigure the interface > > with ifup. > > suspend/resume works for me most time. But not very very stable. > > > There is a way to do it automagically on resume? > > I use a script in /etc/power/scripts.d/ for ifdown/ifup eth1 when > suspend/resume. > Can you send me that script? :)
attached. I use a file /etc/hotplug/blacklist.d/airport which has a line bcm43xx to blacklist the module bcm43xx. In /etc/network/interfaces iface eth1 inet dhcp wpa-conf /home/zhang/.wpa/wpa_supplicant.conf pre-up modprobe bcm43xx post-down modprobe -r bcm43xx post-down modprobe -r ieee80211_crypt_tkip Best regards, Bin
thanks in advance Francesco -- :wq -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
petits_ajustements
Description: Binary data
