Le lundi 15 mai 2006 à 10:49 +0200, Hans Ekbrand a écrit : > On Mon, May 15, 2006 at 12:35:51AM +0200, Jerome Warnier wrote: > > Le mercredi 03 mai 2006 à 01:11 +0100, Colin Watson a écrit : > > > Hi, > > > > > > I've set up miboot-enabled daily builds of d-i powerpc floppies, to go > > > with my normal daily builds: > > > > > > http://people.debian.org/~cjwatson/d-i/powerpc-miboot/ > > > > > > Thanks to Sven Luther for the miboot package used to build these. Let me > > > know if there are any problems; I haven't been able to test them myself. > > I checked it on a PowerMac G3 beige. > > Here's my results from a Performa 5400 (24 MB RAM): > > 2006-05-15: Boot ends with Instruction dump: > 7c0000a6 ....... ....... ....... [ a lot of numbers in two lines] > > > Version 2006-05-14 didn't boot at all. > 2006-05-14: not tested (suspected the same problem as with 06-05-15) > > > Version 2006-05-13 boots, and it already gets pretty far, but it cannot > > detect any disk > 2006-05-13: Boots OK (didn't put out the floppy automatically though, > I had to use a paperclip to get it out). The root image also works > good, until hw-detection. You're right, I got used to the paperclip stuff with the previous versions, so I didn't even bother to specify it, but it is surely not practical at all.
> Doesn't find my ide disk. Same thing here, except that I'm not actually sure it is an IDE disk, and not an SCSI one (I think I have both in the machine, and none is detected). > ~ # ls /lib/modules/2.6.16-1-powerpc-miboot/kernel/drivers > base ieee1394 net scsi > > No ide here! > > I found the ide drivers on the cd-drivers.img. That should be > documented somewhere, since a net-install will fail without > hd-support. Thanks, I will try this. > Also after loading the net-drivers.img the installer failed to detect > my ethernet "de2104x PCI". I tried to load tulip dc21x4x manually but > it failed. It detects mine (this is the second NIC I talked about in my mail). > This was still an interesting test, since I have not been able to boot > 2.6.16 on this machine, but that must be a problem with the initrd > created by initramfs (or possibly something with the way quik boots) -- Jérôme Warnier FLOSS Consultant http://beeznest.net