On Thu, Apr 20, 2006 at 08:18:48AM -0700, Daniel Gimpelevich wrote: Dear all, > >> [quoted text muted] > > using 'lspci' it displays that it has no information about the chipset :( > > Very bad! > > > > SteX > > Try 'cardctl ident' instead. the system displayed the following output to this command
monteverdi:/home/stex# cardctl ident
Socket 0:
product info: "Formac ", "Rev 1.0", "DVB-T ", "CardBus"
manfid: 0x4403, 0x0100
function: 254 ((null))
monteverdi:/home/stex# cardctl info
PRODID_1="Formac "
PRODID_2="Rev 1.0"
PRODID_3="DVB-T "
PRODID_4="CardBus"
MANFID=4403,0100
FUNCID=254
I don't know if it is useful:
[EMAIL PROTECTED] sudo lspci -vv
[...]
0001:11:00.0 Non-VGA unclassified device: Unknown device 0344:d0b1 (rev01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 53
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
[...]
Anything else that may help?
I found the following guide:
http://digitalboy.mythtvtalk.com/files/LinuxTvTunerGuide.pdf
where I could find some Formac device (not mine) that uses bt848 driver to
work. The following link to the kernel bttv support states the same thing:
http://kernel26.sourcesdb.com/r.php?num=7152
Thank you in advance for your help.
Cheers
SteX
--
Stefano Melchior, GPG key = D52DF829 - <[EMAIL PROTECTED]>
http://etinarcadiaego.dyndns.org -- http://www.stex.name
skype ID "stefanomelchior"
signature.asc
Description: Digital signature
