On Fri, Mar 03, 2006 at 08:12:58AM -0500, Toni L. Harbaugh-Blackford [Contr] wrote: > Sven- > > I went ahead and tried to continue with the neboot64 image, but it appears > that this will not work on the Xserve. It only configures one interface > (eth0) and it thinks the interface is firewire apparently. > > When I do an lsmod, no network driver has been loaded for the gigE ports: > > ~ # lsmod > Module Size Used by > scsi_mod 207256 0 > eth1394 34064 0 > ohci1394 55800 0 > ieee1394 428496 2 eth1394,ohci1394 > ehci_hcd 54104 0 > ohci_hcd 37052 0 > usbcore 197140 3 ehci_hcd,ohci_hcd > > lspci lists them as broadcom netXtreme: > > ~ # lspci | grep Eth > 0001:07:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 > Gigabit > Ethernet (rev 03) > 0001:07:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 > Gigabit > Ethernet (rev 03) > > But on another system (non Xserve) where I have the same controllers, they use > the 'tg3' driver. However, I don't see any tigon driver in the modules > listing:
Normal, tg3 contains non-free firmware, and was thus removed from main, Bastian Blank worked on building such a module in non-free, and using this is part of the goals for etch beta3, and will be discussed during the d-i meeting tomorrow. Friendly, Sven Luther -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
