Ruben at Mon, Jan 16, 2006 at 01:01:37PM CET wrote: > > At Mon, 16 Jan 2006 10:22:52 +0100, Milan Toth wrote: > > > > > well i have got eventually the AirPort card working WITH WEP SECURITY > > > ON!!! > > > > should I only update bcm43xx and softmac source and WEP will > > work form me? > > Yes, I used the svn from bcm43xx (you could also use a snapshot) and a > snapshot of softmac. You just need to disable ieee80211 in the > (vanilla) kernel, since the modified ieee80211 is included in the > softmac snapshot. A "make install" will install the needed kernel > modules in /lib/modules for both softmac and bcm43xx.
OK. So I download a 2.6.15.1 from kernel.org disbale Generic IEEE 802.11 Networking Stack and try to compile softmac-snapshot but I'v got error that I dont have IEEE 802.11 compiled into kernel. So I enbale it compile softmac with this warnning: *** Warning: "wireless_send_event" [/home/data/src/softmac-snapshot/net/ieee80211/softmac/ieee80211softmac.ko] undefined! then: export SOFTMAC_DIR=/home/data/src/softmac-snapshot and compile the bcm43xx driver with this warnnings: *** Warning: "free_ieee80211softmac" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_stop" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_set_genie" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_set_wap" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_get_essid" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_get_rate" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_get_wap" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_set_essid" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_start" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_get_genie" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_get_scan_results" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211_wx_get_auth" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_trigger_scan" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "alloc_ieee80211softmac" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211_wx_set_auth" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! *** Warning: "ieee80211softmac_wx_set_rate" [/home/data/src/bcm43xx/driver/bcm43xx.ko] undefined! and finaly when I try to modprobe the bcm4300 I'v got this error: [EMAIL PROTECTED]/home/data/src/bcm43xx/driver] sudo modprobe bcm43xx WARNING: Error inserting ieee80211softmac (/lib/modules/2.6.15.1-krachsna-2/kernel/drivers/net/ieee80211softmac/ieee80211softmac.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting bcm43xx (/lib/modules/2.6.15.1-krachsna-2/kernel/drivers/net/bcm43xx/bcm43xx.ko): Unknown symbol in module, or unknown parameter (see dmesg) help me please :( > > Then you do something like the following: > --------------- > #!/bin/bash > ifconfig eth1 down > ifconfig eth1 up > iwconfig eth1 rate 11M > iwconfig eth1 essid fifi > iwconfig eth1 key 1230123012301230123012302 > dhclient eth1 > --------------- > > Adapt everything to your configuration of course, maybe a higher rate > than 11M is possible according to circumstances, but it works very > well in my case. A higher rate gives me trouble with dhcp. But for > the rest it is very stable. (and now the connection works immediately) > -- Milan Toth .''`. http://milan.toth-online.com : :' : [EMAIL PROTECTED] `. `'` `- MATH AND ALCOHOL DON'T MIX! Please don't drink and derive. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
