Johannes Berg at Tue, Jan 03, 2006 at 02:37:28PM CET wrote: > On Tue, 2006-01-03 at 14:23 +0100, Milan Toth wrote: > > > > I have same problem and when I run > > > > krachsna:~# ifconfig eth1 up > > SIOCSIFFLAGS: No such file or directory > > That's not the same problem, look into dmesg and follow the readme. > > [hint: this usually happens if you didn't extract the firmware > correctly]
here is output of fwcutter [EMAIL PROTECTED]/home/data/src/bcm43xx/fwcutter] ./fwcutter /macosx//System/Library/Extensions/AppleAirport2.kext/Contents/MacOS/AppleAirPort2 fwcutter can cut the firmware out of /macosx//System/Library/Extensions/AppleAirport2.kext/Contents/MacOS/AppleAirPort2 filename : AppleAirPort2 version : 3.90.34.0.p11 (400.17) MD5 : ca0f34df2f0bfb8b5cfd83b5848d2bf5 WARNING! This firmware doesn't include support for 802.11a cards. WARNING! Use this firmware only for 802.11b/g cards. extracting bcm43xx_microcode2.fw ... extracting bcm43xx_microcode4.fw ... extracting bcm43xx_microcode5.fw ... *****: Sorry, it's not posible to extract "bcm43xx_microcode11.fw". *****: Extracting firmware from an old driver is bad. Choose a more recent one. *****: Luckily bcm43xx driver doesn't include microcode11 uploads at the moment. *****: But this can be added in the future... extracting bcm43xx_pcm4.fw ... extracting bcm43xx_pcm5.fw ... extracting bcm43xx_initval01.fw ... extracting bcm43xx_initval02.fw ... extracting bcm43xx_initval03.fw ... extracting bcm43xx_initval04.fw ... extracting bcm43xx_initval05.fw ... extracting bcm43xx_initval06.fw ... extracting bcm43xx_initval07.fw ... extracting bcm43xx_initval08.fw ... extracting bcm43xx_initval09.fw ... extracting bcm43xx_initval10.fw ... but dmesg said that there is problem with: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. and in /lib/firmware there is bcm43xx_microcode5.fw file -- Milan Toth .''`. http://milan.toth-online.com : :' : [EMAIL PROTECTED] `. `'` `- MATH AND ALCOHOL DON'T MIX! Please don't drink and derive. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
