El Viernes, 21 de Octubre de 2005 00:07, Benjamin Herrenschmidt escribió: > You mean that occasionally, when you boot, it doesn't work ? No, when i boot the computer, the card works ok, but from time to time, it stops working. Ifdowning ang ifuping again doesn't solve the problem, and neither does rmmoding airport, hermes... I seems more an issue of eth1: New link status: Connected (0001) eth1: New link status: Disconnected (0002) as Wojciech says in his message. But i don't know how to trace the problem better or reproduce. For that is what I need help, so I could be more precise. Regards, Enric
PD: It happened again while I was typing this message. Looking at logs, I've found this, perhaps its useful: Oct 21 16:19:00 fourier kernel: eth0: Hardware identity 0005:0001:0001:0002 Oct 21 16:19:00 fourier kernel: eth0: Station identity 001f:0001:0008:0046 Oct 21 16:19:00 fourier kernel: eth0: Firmware determined as Lucent/Agere 8.70 Oct 21 16:19:00 fourier kernel: eth0: Ad-hoc demo mode supported Oct 21 16:19:00 fourier kernel: eth0: IEEE standard IBSS ad-hoc mode supported Oct 21 16:19:00 fourier kernel: eth0: WEP supported, 104-bit key Oct 21 16:19:00 fourier kernel: eth0: MAC address 00:30:65:26:FF:7C Oct 21 16:19:00 fourier kernel: eth0: Station name "HERMES I" Oct 21 16:19:00 fourier kernel: eth0: ready Oct 21 16:19:00 fourier kernel: airport: Card registered for interface eth0 Oct 21 16:19:00 fourier kernel: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:71:d1:a8 Oct 21 16:19:00 fourier kernel: eth0: Found BCM5221 PHY Oct 21 16:19:00 fourier kernel: eth1: New link status: Connected (0001) It's really messed with eth0 and eth1, and iwconfig says eth0 has no wireless extensions.
