Hi everybody, I tested benh sleep patch on my 1.5GHz powerbook. After the first sleep its resume very well. After the second too. Now, if the first sleep is a little longer, after the second sleep, the resume goes bad. In fact only the screen doesn't resume well. Its flatterned, and the only way to get the screen well running its to reboot the powerbook.
Here some of my conf: $ lspci 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) 0001:10:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:24:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:24:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:24:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:24:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) ~$ cat /etc/pbbuttonsd.conf # Configuration file for PBButtonsd >= Version 0.5 # for complete list of options please see pbbuttonsd.conf man-page # [SYSTEM] #userallowed = "paranoid" ; user who is allowed to use IPC autorescan = no ; automatic rescan of event devices CmdTimeout = 4 # [MODULE POWERSAVE] onAC_policy = performance ; nochange, performance, custom or powersave onAC_TimerAction = none ; none, suspend-to-ram, suspend-to-disk, blankscreen onAC_CoverAction = suspend-to-ram onAC_KeyAction = suspend-to-ram ; SleepKey onAC_SuspendTime = 0 ; time in 1/10 seconds onAC_DimTime = 0 ; time in 1/10 seconds onBattery_policy = powersave onBattery_TimerAction = suspend-to-ram ; none, suspend-to-ram, suspend-to-disk, blankscreen onBattery_CoverAction = suspend-to-ram onBattery_KeyAction = suspend-to-ram ; SleepKey onBattery_SuspendTime = 3000 ; time in 1/10 seconds onBattery_DimTime = 600 ; time in 1/10 seconds SleepKey = 116 SleepKeyDelay = 0 ; values > 0 may be dangerous, if the power key is used to trigger sleep BWL_first = 22 ; first battery warnlevel, time in minutes BWL_second = 10 ; second battery warnlevel, time in minutes BWL_last = 3 ; last battery warnlevel, time in minutes Script_PMCS = "/etc/power/pmcs-pbbuttonsd %s %s %s" EmergencyAction = sleep ; action, if battery is critically low HeartbeatBeep = no ; beep, if nothing else showed that the computer lives CPULoad_sleeplock = yes CPULoad_min = 20 ; value in percent CPULoad_period = 20 ; time in seconds NETLoad_sleeplock = yes NETLoad_min = 4096 ; traffic in Bytes/s NETLoad_period = 20 ; time in seconds NETLoad_device = "eth0" # [MODULE DISPLAY] #LCD_Brightness = 8 ; initial LCD brightness level LCD_FadingSpeed = 5 ; 0 = no smooth fading LCD_AutoAdjust = yes ; only on Aluminum PowerBooks LCD_IllumUpKey = 225 LCD_IllumDownKey = 224 LCD_Threshold = 94 LCD_AutoAdjMin_Bat = 2 ; autoadjust parameter LCD_AutoAdjMax_Bat = 7 LCD_AutoAdjMin_AC = 1 LCD_AutoAdjMax_AC = 15 KBD_Brightness = 1 ; initial keyboard illumination level KBD_OnBrightness = 5 ; initial level if KBD on/off key is pressed KBD_FadingSpeed = 5 ; 0 = no smooth fading KBD_AutoAdjust = yes ; only on Aluminum PowerBooks KBD_IllumUpKey = 230 KBD_IllumDownKey = 229 KBD_IllumOnKey = 228 KBD_Threshold = 28 ; only on Aluminum PowerBooks dev_FrameBuffer = "/dev/fb0" UseFBBlank = yes DimFullyDark = no # [MODULE OSSMIXER] #Volume = 50 ; initial volume level Speakers_muted = no ; mute after startup? VolumeUpKey = 115 VolumeDownKey = 114 MuteKey = 113 dev_Mixer = "/dev/mixer" MixerInitDelay = no MixerChannels = "volume, speaker" # [MODULE CDROM] dev_CDROM = "/dev/cdrom" EjectCDKey = 161 EjectCDKeyDelay = 0 # [MODULE PMAC] dev_PMU = "/dev/pmu" dev_ADB = "/dev/adb" TPModeUpKey = 225 + alt TPModeDownKey = 224 + alt TPMode = drag KBDMode = fkeysfirst Batlog = none Thank you benh for the great works, I hope I can help you debbugging it... Gruss Guillaume
