thanx, that was it ! tina
debian-powerpc@lists.debian.org schrieb am 13.09.04 11:22:11: > > Hi, > > Christina Boeckler writes: > > > i am running sarge on an g3 newworld powerbook > > Which model? There are two NewWorld PowerBooks with G3 processors, > the Lombard and the Pismo. You can easily recognise them, the Lombard > has a SCSI port at the rear while the Pismo has two Firewire ports. > > > and with a standard debian 2.4.26-powerpc-pmac kernel almost > > everything is fine. but when i want to upgrade to a 2.6.7-powerpc > > kernel, my network is not recognised anymore : > [...] > > the same happens with the 2.4.26-powerpc-small-pmac kernel. > [...] > > following the discussion on this list i installed discover1, but it > > did not help ... > > From the symptoms, I would assume that you have a Lombard and need to > load the bmac driver manually (the Pismo has a gmac ethernet card, and > it's sungem driver is found nicely by discover). Try and run the > command 'modprobe bmac' while running the 2.6.7 kernel, and if that > works add a line containing just 'bmac' to the file /etc/modules. > > Regards, Jens. > > -- > J'qbpbe, le m'en fquz pe j'qbpbe! > Le veux aimeb et mqubib panz je pézqbpbe je djuz tqtaj! ____________________________________________________ Aufnehmen, abschicken, nah sein - So einfach ist WEB.DE Video-Mail: http://freemail.web.de/?mc=021200
