On Sat, 2004-09-04 at 09:47, Sven Luther wrote: > <snip> > > I grab the today build but like the yesterday, it doesn't detect my scsi > > card. I open a shell, type modprobe sd_mod, retry detect hardware and it > > complains about missing modules like ncr symbios logix, ide and usb stuff > > :/ I use the > > http://people.debian.org/~luther/debian-installer/daily-powerpc-built/2004-09-03/powerpc/netboot/vmlinuz-prep.initrd > > > > Here is a cat /proc/pci extract: > > > > Bus 0, device 16, function 0: > > SCSI storage controller: LSI Logic / Symbios Logic 53c825 (rev 19). > > IRQ 23. > > Master Capable. Latency=32. Min Gnt=17.Max Lat=64. > > I/O at 0x1400 [0x14ff]. > > Non-prefetchable 32 bit memory at 0xfeeae000 [0xfeeae0ff]. > > Non-prefetchable 32 bit memory at 0xfeeaf000 [0xfeeaffff]. > > > > When the missing modules will be available ? > > Notice that this should be sym53c8xx. Can you try booting and at the first > oportunity go back, and change the priority to medium, and then chose the > unstable mirror. > > The added modules that fix this are not yet in sarge, and will probably not be > until RC2 is released. > > Friendly, > > Sven Luther
Hi, I've tried this yesterday (even append DEBCONF_PRIORITY=low on the ppc bootloader) but it always tells me that some modules are missing to support my hardware, and that included NCR/Symbios logic module. Regards Nicolas
