-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all... I have a problem with software suspend (pmdisk) with an iBook G4. Some information on my system: - --/proc/cpuinfo----------------------------------------------------- processor : 0 cpu : 7447A, altivec supported clock : 533MHz revision : 1.1 (pvr 8003 0101) bogomips : 530.43 machine : PowerBook6,5 motherboard : PowerBook6,5 MacRISC3 Power Macintosh detected as : 287 (iBook G4) pmac flags : 0000000a L2 cache : 512K unified memory : 512MB pmac-generation : NewWorld - --------------------------------------------------------------------------
- --lspci------------------------------------------------------------------ 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV250 5c63 [Radeon Mobility 9200 M9+] (rev 01) 0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:01:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:02:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:02:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:02:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) - -------------------------------------------------------------------------- Suspend and resume work fine if I am in console. But from X the system crash when X turn on after resume. I try to suspend and resume in console and after switch to the X session but it crash anyway. Here is my XFree config - --/etc/XF86Config-4---------------------------------------------- Section "ServerLayout" Identifier "normal" Screen 0 "Screen0-normal" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerLayout" Identifier "clone-setup" Screen 0 "Screen0-clone-setup" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" FontPath "/usr/lib/X11/fonts/misc/" # FontPath "/usr/lib/X11/fonts/cyrillic/" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1/" FontPath "/usr/lib/X11/fonts/CID" FontPath "/usr/lib/X11/fonts/Speedo/" FontPath "/usr/lib/X11/fonts/75dpi/" FontPath "/usr/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "dbe" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" # Load "pex5" Load "record" Load "speedo" Load "type1" Load "vbe" # Load "xie" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "it" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "ZAxisMapping" "4 5" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "true" Option "Device" "/dev/input/mice" EndSection Section "Monitor" Identifier "LCD" Option "DPMS" HorizSync 40 - 70 VertRefresh 40 - 70 #Mode "1280x854" # DotClock 79.816 # HTimings 1280 1296 1408 1536 # VTimings 854 855 858 866 # Flags "-HSync" "-VSync" #EndMode EndSection Section "Device" Identifier "Card0-normal" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "Radeon Mobility M9+ [Radeon Mobility 9200]" BusID "PCI:0:16:0" Option "UseFBDev" "true" Option "DRIReinit" Option "AGPMode" "4" EndSection Section "Device" Identifier "Card0-clone-setup" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "Radeon Mobility M9+ [Radeon Mobility 9200]" BusID "PCI:0:16:0" Option "MonitorLayout" "LVDS,CRT" Option "OverlayOnCRTC2" Option "CloneHSync" "40.0-100.0" Option "CloneVRefresh" "40.0-120.0" Option "UseFBDev" "false" Option "AGPMode" "4" EndSection Section "Screen" Identifier "Screen0-normal" Device "Card0-normal" Monitor "LCD" DefaultDepth 16 SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen0-clone-setup" Device "Card0-clone-setup" Monitor "LCD" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection - -------------------------------------------------------------------------- I try to search in google but the only hint I found was to disable DRI. I try that but it still don't work. Has anyone any hint? Thanks to everyone and sorry for my poor english ;-) Andrea Zito - -- Nivox Linux Registered User #290686 Powered by: Debian Testing/Unstable JABBER: [EMAIL PROTECTED] GPG Key ID: 0xC6A50D8D (info: www.gnupg.org) GPG Keyserver: http://www.keyserver.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFBLw/kfhOftsalDY0RAvfXAKCbR3/jW9sEprdoKGmpfCSWZIwu7QCdF4sy 9OVUiSRIRGJsOLSt56ZroOI= =BuIo -----END PGP SIGNATURE-----
