> Could you please provide your pbbuttonsd.conf file ? sure... however please note that I run my own custom scripts none of pbbuttonsd
# configfile for pbbuttonsd # [SYSTEM] userallowed = "me" ; user who is allowed to use IPC autorescan = no ; automatic rescan of event devices CmdTimeout = 60 ; timeout in seconds for launched scripts, etc. # [MODULE POWERSAVE] onAC_policy = performance ; nochange, performance, custom or powersave onAC_sleep = no onAC_coversleep = no onAC_Tsleep = 0 onAC_Tdim = 1800 onBattery_policy = powersave onBattery_sleep = yes onBattery_coversleep= yes onBattery_Tsleep = 6000 ; time in 1/10s onBattery_Tdim = 1800 ; time in 1/10s SleepKey = 116 SleepKeyDelay = 0 ; values > 0 may be dangerous, if the power key is used to trigger sleep SleepKeySleep = yes ; yes=sleep, no=blank BWL_first = 22 ; first battery warnlevel, time in minutes BWL_second = 10 ; second battery warnlevel, time in minutes BWL_last = 3 ; last battery warnlevel, time in minutes Script_PMCS = "/etc/power/pmcs-pbbuttonsd %s %s" EmergencyAction = sleep ; action, if battery is critically low HeartbeatBeep = no ; beep, if nothing else showed that the computer lives CPULoad_sleeplock = yes CPULoad_min = 20 ; value in percent CPULoad_period = 600 ; time in seconds NETLoad_sleeplock = yes NETLoad_min = 4096 ; trafic in Bytes/s NETLoad_period = 600 ; time in seconds NETLoad_device = "eth0" # [MODULE DISPLAY] LCD_Brightness = 15 ; initial LCD brightness level LCD_FadingSpeed = 3 ; 0 = no smooth fading LCD_AutoAdjust = yes ; only on Aluminum PowerBooks LCD_IllumUpKey = 225 LCD_IllumDownKey = 224 LCD_Threshold = 94 ; ambient light threshold in percent for backlight autoadj. LCD_AutoAdjMin_Bat = 2 ; autoadjustment range parameters LCD_AutoAdjMax_Bat = 7 LCD_AutoAdjMin_AC = 1 LCD_AutoAdjMax_AC = 15 KBD_Brightness = 0 ; initial keyboard illumination level KBD_FadingSpeed = 5 ; 0 = no smooth fading KBD_AutoAdjust = yes ; only on Aluminum PowerBooks KBD_IllumUpKey = 0 KBD_IllumDownKey = 0 KBD_IllumOnKey = 0 KBD_Threshold = 28 ; ambient light threshold in percent for keyboard light autoadj. dev_FrameBuffer = "/dev/fb0" UseFBBlank = yes DimFullyDark = no # [MODULE OSSMIXER] #Volume = 69 ; initial volume level #Speakers_muted = no ; mute after startup? VolumeUpKey = 115 VolumeDownKey = 114 MuteKey = 113 dev_Mixer = "/dev/mixer" #MixerInitDelay = no MixerChannels = "volume, pcm, speaker" # [MODULE CDROM] dev_CDROM = "/dev/cdrom" EjectCDKey = 161 EjectCDKeyDelay = 1000 # [MODULE PMAC] dev_PMU = "/dev/pmu" dev_ADB = "/dev/adb" TPModeUpKey = 225 + alt TPModeDownKey = 224 + alt TPMode = notap KBDMode = fkeysfirst
